@article { author = {Hosseini, S. A}, title = {3D Computational Code for Calculation of Kineric Parameters Based on Galerkin Finite Element Method}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {38}, number = {4}, pages = {1-9}, year = {2018}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {In the present paper, development of the Galerkin Finite Element Method-Kinetic-3 Dimentional (GFEM-KIN-3D) computational code for the calculation of the kinetic parameters is reported. To this end, the static neutron diffusion and corresponding adjoint equations are solved using Galerkin Finite element method in the 3 dimensional geometry. Then, the calculated neutron and adjoint flux distributions are used in the perturbation theory to calculate the effective delayed neutron fraction and mean generation time of the neutrons. There is no benchmark problem that includes the information such as the delayed neutron fraction, prompt and delayed neutron spectrum. Therefore, some problems were designed by the author and the kinetic parameters were calculated for the considered problem. Since the neutron diffusion solver was previously validated against the well-known benchmark problems and the equations of perturbation theory is available, we conclude that if the required information is known, the kinetic parameters will be calculated with high accuracy. The developed GFEM-KIN-3D is applicable to the core calculation of the both hexagonal and rectangular reactor cores.}, keywords = {Neutron Flux,Adjoint Flux,Tetrahedral Elements,Effective Delayed Neutron Fraction,Mean Generation Time of the Neutrons}, title_fa = {کد محاسباتی سه‌بُعدی پارامترهای سینتیکی به روش اِلمان محدود گلرکین}, abstract_fa = {در این مقاله، توسعه­‌ی کد کامپیوتری GFEM-KIN-3D به منظور محاسبه‌­ی پارامترهای سینتیکی گزارش می‌­شود. برای این منظور، در ابتدا معادله­‌ی پخش نوترون مستقل از زمان و الحاقی آن در هندسه­‌ی سه­‌بُعدی با استفاده از روشاِلمان محدود گلرکین حل می­‌شود. در ادامه، از طریق وارد کردن توزیع شار نوترونی و الحاقی آن در رابطه‌­ی مربوط به اختلال، کسر مؤثر نوترون‌های تأخیری و مدت زمان متوسط تولید نوترون­‌ها محاسبه می­‌شود. مشکل اصلی در راستی‌­آزمایی این پروژه، عدم وجود مسئله­‌ی آزمون است که شامل داده­‌های مربوط به کسر نوترون‌­های تأخیری، طیف نوترون­‌های آنی و طیف نوترون­­‌های تأخیری باشد. بنابراین، به ناچار چند مسئله طراحی، و پارامترهای سینتیکی برای آنها محاسبه شد. با توجه به این­که حل معادله‌­ی پخش نوترون در سه­‌بُعد با استفاده از مسائل آزمون معتبر راستی­‌آزمایی شد و رابطه­‌ی اختلال نیز یک رابطه­‌ی کاملاً مشخص دارد، بنابراین با اطمینان می‌­توان گفت در صورت داشتن اطلاعات کافی می‌­توان پارامترهای سینتیکی را با دقت خوبی محاسبه کرد. کد کامپیوتری توسعه داده شده GFEM-KIN-3D قابل استفاده در محاسبات قلب راکتور با هر شکل هندسی اعم از راست­گوش و شش­‌گوش است.}, keywords_fa = {شار نوترون,شار الحاقی,اِلمان هرمی,کسر مؤثر نوترون‌های تأخیری,عمر متوسط تولید نوترون‌ها}, url = {https://jonsat.nstri.ir/article_172.html}, eprint = {https://jonsat.nstri.ir/article_172_d1f6bbac564df49a4423f1f0bd871239.pdf} } @article { author = {Hajizadeh, A and Kazeminejad, H and Talebi, S}, title = {A Fully Implicit Numerical Scheme for Simulation of Two Phase Flow in a Vertical Channel Using the Drift Flux Model}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {38}, number = {4}, pages = {10-21}, year = {2018}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {}, keywords = {}, title_fa = {یک روش عددی کاملاً ضمنی برای شبیه‌سازی جریان دوفازی در یک کانال عمودی با استفاده از مدل شار رانشی}, abstract_fa = {در این مقاله جریان دوفازی در یک کانال عمودی با استفاده از مدل شار رانشی به صورت کاملاً ضمنی شبیه‌­سازی شده است. پایداری بدون شرط و هم­چنین، دقت مرتبه­‌ی دوی نتایج نسبت به زمان از مزایای این روش است. تاکنون از روش نیوتون برای حل دستگاه معادلات غیرخطی حاصل از گسسته­‌سازی کاملاً ضمنی معادلات میدانی مدل­‌های فیزیکی استفاده شده است. فقدان هم­گرایی آن بدون حدس اولیه‌­ی خوب و تشکیل ماتریس ژاکوبین، معضلاتی را برای پژوهش‌گران در این زمینه ایجاد کرده است. در این مقاله، با استفاده از الگوریتم سیمپل، روشی کاملاً ضمنی برای شبیه‌­سازی جریان دوفازی، ارائه شده است. این روش معضلات مذکور در روش نیوتون را ندارد. برای محدوده‌­ی وسیعی از شرایط، پارامترهای کلیدی ترموهیدرولیکی محاسبه شده با این مدل، توافق خوبی با نتایج تجربی و نرم­‌افزار ریلپ دارند. با توجه به نتایج، همان­طور که انتظار می‌­رفت، دقت مدل ارائه شده نسبت به زمان از مرتبه­ی دو است و نیاز به محدودیت گام زمانی برای حفظ پایداری ندارد.}, keywords_fa = {جریان دوفازی,روش کاملاً ضمنی,شاررانشی}, url = {https://jonsat.nstri.ir/article_173.html}, eprint = {https://jonsat.nstri.ir/article_173_2d30d349999bb2bfc57638ef3acb3104.pdf} } @article { author = {Zarei, S and Lamehi Rachti, M and Ghasemi, F and Abbasi Davani, F}, title = {Beam Dynamic Study of a Designed Accelerating Cavity for 6 MeV Linac}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {38}, number = {4}, pages = {22-31}, year = {2018}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Side coupled standing wave accelerating cavities are widely used in a low energy linear accelerator because of relatively high accelerating gradient and low sensitivity to construction tolerances. The effective interaction of particles and electromagnetic fields is important to accelerate electrons to the intended energy with the greatest efficiency and beam quality output. Beam dynamics study is essential for determining the coordinates of the output beam from the cavity. In this paper, we present the beam dynamics of a 6 MeV accelerating cavity using a space charge tracking algorithm (ASTRA). The designed accelerating cavity that feeds by magnetron with a maximum power of 3.2 MW is operating in π/2 mode at a frequency of 2856 MHz. The results show that after the construction of the designed cavity, the vertical and horizontal emittances of the output beam, the transverse profile and the beam energy spread respectively 3.55 pi-mm-mrad, 1 mm and 0.88 MeV as expected.}, keywords = {Beam Dynamics,Standing-Wave Accelerating Cavity,ASTRA,Electromagnetic Field and Electron Interaction}, title_fa = {بررسی دینامیک باریکه‌ی کاواک شتاب‌دهی موج ایستای طراحی شده برای شتاب‌دهنده‌ی خطی الکترون 6 مگاالکترون ولت}, abstract_fa = {کاواک‌های شتاب‌دهی موج ایستای جفت‌شده­ی جانبی به علت گرادیان شتاب‌دهی نسبتاً بالا و حساسیت نسبتاً کم نسبت به خطای ساخت، در شتاب‌دهنده‌های خطی الکترون با انرژی پایین کاربرد گسترده‌ای دارند. مهم‌ترین گزینه در طراحی کاواک‌های شتاب‌دهی، برهم­کنش مؤثر ذره و میدان‌های الکترومغناطیسی برای رساندن خوشه‌های الکترون به انرژی مورد نظر با بیش‌ترین راندمان و کیفیت مناسب باریکه­‌ی خروجی است. بررسی دینامیک باریکه برای تعیین مشخصات باریکه­‌ی خروجی از کاواک ضروری است. در این مقاله با استفاده از کد استرا، دینامیک باریکه­‌ی کاواک شتاب‌دهی MeV 6 بررسی شده است. کاواک مورد نظر به منظور تشدید در مد عملکردی 2/π با فرکانس MHz 2998.5 طراحی شده است که با لامپ مگنترون با بیشینه توان MW 2.3 تغذیه می‌شود. نتایج به دست آمده نشان می‌دهد که پس از ساخت کاواک طراحی شده، برای باریکه­‌ی خروجی، گسیلندگی در جهت افقی و عمودی، نیم‌رخ عرضی در جهت عمودی و افقی، و گستردگی انرژی به ترتیب مقادیر mm 1.25، pi-mm-mrad 4.18 و MeV 0.84 مورد انتظار است.}, keywords_fa = {دینامیک باریکه,کاواک شتاب‌دهی موج ایستا,کد استرا,برهم‌کنش الکترون و میدان الکتریکی}, url = {https://jonsat.nstri.ir/article_174.html}, eprint = {https://jonsat.nstri.ir/article_174_fffc2c3db712cb30916bb04361335112.pdf} } @article { author = {Torkzadeh, F and Mardashti, F}, title = {Prepairing LiF:Mg,Ti Dosimeter Pellets by Melting Method and Study of Stimulated Response Reduction Function for High Dose Dosimetry}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {38}, number = {4}, pages = {32-37}, year = {2018}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Thermoluminescence dosimeters are widely used for dosimetry in different radiation fields. In this study, the feasibility of the application of the cold-pressed sintered LiF:Mg,Ti dosimeter pellets, produced by the melting method in our TL laboratory, was investigated for gamma high dose dosimetry. The relation of sensitivity reduction with increasing of the dose is used to determine the high gamma doses. To obtain the dose response-reduction curve for these dosimeters to high doses, 60Co gamma doses between 1 to 500kGy were used. The resulting dose response-reduction curve shows a logarithmic response reduction to the absorbed dose. The correlation between the Ti dopant concentration and the range of dose response reduction curve was studied. Considering the reproducibility, this method could be used for a wide range of high doses.}, keywords = {Thermoluminescence Dosimeter,LiF:Mg,Ti,High Dose,TLD-700,Sensitivity Reduction Response}, title_fa = {ساخت قرص دزیمتر LiF:Mg,Ti با روش ذوب و بررسی تابع کاهش حساسیت پرتو واداشته برای دزیمتری بسیار بالا}, abstract_fa = { آشکارسازهای ترمولومینسانس کاربرد وسیعی در دزیمتری میدان‌های مختلف پرتوی دارند. در این پژوهش، امکان استفاده از دزیمترهای LiF:Mg,Ti که در آزمایشگاه ترمولومینسانس با روش ذوب و پرس سرد و سینترینگ ساخته شد، برای اندازه‌گیری دز گاما در میدان‌های بسیار بالا بررسی شد. برای تعیین دز بسیار بالای گاما، از وابستگی کاهش حساسیت با افزایش دز استفاده شده است. به منظور به دست آوردن منحنی کاهش پاسخ دز برای این دزیمترها در دزهای بالا، از گستره‌ی دز 1 تا kGy500  گاما و چشمه­‌ی  60Co استفاده شد. منحنی پاسخ دز به دست آمده، یک روند نمایی کاهش حساسیت را نسبت به دز نشان می‌دهد. وابستگی گستره‌ی منحنی کاهش پاسخ دز با میزان غلظت آلاینده­ی Ti بررسی شد. با توجه به قابلیت تکرارپذیری، این روش برای استفاده در دزیمتری گاما در گستره‌ی دز بالا قابل استفاده است.}, keywords_fa = {دزیمتر ترمولومینسانس، LiF:Mg,Ti، دز بالا، TLD-700، پاسخ کاهش حساسیت}, url = {https://jonsat.nstri.ir/article_175.html}, eprint = {https://jonsat.nstri.ir/article_175_2cd45a418591f28939b23ef78cf0ef0d.pdf} } @article { author = {Ghasemi, M. R and Ghoreishi, S. M and Ghannadi Maragheh, M and Jazini, M. H}, title = {Comparative Study of Fixed and Fluidized Bed Reactor for Zirconium Tetrachloride Production}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {38}, number = {4}, pages = {38-44}, year = {2018}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {In this research, zirconium tetrachloride production is studied as one of the stages of zirconium production. Basically, there are two main methods for producing zirconium tetrachloride from zirconium dioxide: The first and older method used in Iran is the fixed bed process. Despite the advantage of the process and equipment simplicity, this method has a lot of problems, including low efficiency and operator safety problems. In this study, the efficiencies of this method and a newer technique that is fluidized bed reactor were compared. Although the capacity of the reactors are very different, according to that comparison which is based on the unit weight of zirconium production, the result has enough validity. Based on this study, the efficiency of the fluidized bed reactor is 14% higher than that of the fixed bed}, keywords = {Zirconium Tetrachloride,Fluidized Bed Reactor,Zirconium Dioxide}, title_fa = {مقایسه‌ی بازده‌ی راکتورهای بستر ثابت و بستر سیال در تولید تتراکلرید زیرکونیم}, abstract_fa = {در این مطالعه، تولید تتراکلرید زیر‌­­­­کونیم که یکی از مراحل تولید زیر‌‌کونیم است بررسی می‌­شود. دو روش اصلی برای تولید آن از دی‌اکسید زیرکونیم وجود دارد. روش اول و قدیمی‌تر که در ایران هم از این روش استفاده می­‌شود، بستر ثابت نام دارد. این روش با وجود مزیت سادگی فرایند و تجهیزات، مشکلات زیادی نیز دارد که از جمله­‌ی آنها می­‌توان به بازده­ی پایین، مشکلات اپراتوری و ایمنی اشاره کرد. در این پژوهش، مقایسه‌­ای بین بازده­ی دو راکتور در تولید تتراکلرید زیرکونیم انجام شده است. هرچند ظرفیت یکی از این راکتورها چندین برابر راکتور دیگر است، اما با توجه به این­که نتایج مقایسه براساس واحد تولید زیرکونیم و تفاوت نسبت­‌ها انجام شده است­، دقت مناسبی دارد. براساس این پژوهش، بازده­ی کل در راکتور بستر سیال 14­% بالاتر از راکتور بستر ثابت است.}, keywords_fa = {تتراکلرید زیرکونیم,راکتور بستر سیال,دی‌اکسید زیرکونیم}, url = {https://jonsat.nstri.ir/article_176.html}, eprint = {https://jonsat.nstri.ir/article_176_a112e72f33d4303bffa1af64d7696960.pdf} } @article { author = {Sohbatzadeh Lonbar, H and Keshtkar, A and Safdari, J and Fatemi Ardestani, F and Ghasemi Torkabadi, M}, title = {Screening of Significant Factors in Uranium Biosorption from Aqueous Solutions Using Pseudomonas Putida Immobilized on Chitosan}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {38}, number = {4}, pages = {45-57}, year = {2018}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Heavy metal sequestration from industrial wastewater is a serious environmental problem especially in developing countries. Among various treatment technologies, it seems that biosoprtion is a promising alternative method. Microbial–based biosorbents are effective and applicable for heavy metals removal from aqueous solutions. The present study investigated the ability of Pseudomonas putida immobilized on chitosan to adsorb uranium (VI) from the aqueous solution. The biosorption process factors were screened using Plackett–Burman design. The results showed that the biosorbent dosage, initial concentration, biosorbent particle size, bacteria wt.% in the biosorbent and pH were the most significant parameters, respectively while temperature was the only insignificant parameter in the biosorption process. Maximum practical biosorption capacity was 536.08 mg g–1 obtained from 15 wt.% of the bacterial cells immobilized on chitosan. Biosorption equilibrium isotherms were analyzed by Langmuir, Freundlich and Dubinin–Radushkevhch models. For Pseudomonas putida immobilized on chitosan, the Langmuir isotherm model (R2=0.983) was proved to fit the equilibrium data best with the maximum capacities of 588.23 and 454.54 mg g–1 for the biosorbent and pure chitosan, respectively. In conclusion, the present study indicated that the prepared composite biosorbent could be a suitable candidate for uranium (VI) biosorption.}, keywords = {Biosorption,Uranium(VI),Bacterium,Pseudomonas Putida,Chitosan}, title_fa = {غربال‌گری عوامل مؤثر بر جذب‌زیستی اورانیم از محلول‌های آبی با استفاده از باکتری Pseudomonas Putida تثبیت ‌شده در کیتوزان}, abstract_fa = {جداسازی فلزهای سنگین از پساب صنعتی، معضل زیست‌­محیطی جدی به ویژه در کشورهای در حال توسعه است. از میان فناوری­‌های آمایشی متعدد، به نظر می‌­رسد که جذب‌­زیستی گزینه­‌ی مناسبی باشد. ­جاذب­‌های زیستی پایه میکروبی برای حذف فلزهای سنگین از محلول­‌های آبی، مؤثر و کاربردی­‌اند. در مطالعه­‌ی حاضر، توانایی باکتری Pseudomonas putida تثبیت ­شده بر روی کیتوزان برای جذب‌­زیستی اورانیم (VI) از محلول‌­های آبی بررسی شد. غربال­‌گری عوامل مؤثر بر فرایند جذب­‌زیستی به کمک طراحی پلکت- برمن صورت گرفت. نتایج تجربی نشان داد که مقدار جاذب‌­زیستی، غلظت اولیه اورانیم، اندازه­‌ی ذرات جاذب­‌زیستی، درصد وزنی باکتری در جاذب‌­زیستی و pH، به­ ترتیب بیش­ترین تأثیر را بر میزان جذب دارند، در حالی­که دما یک پارامتر غیرمؤثر تشخیص داده شد. بیشینه‌­ی ظرفیت جذب­‌زیستی عملی برای جاذب­‌زیستی حاوی 15% وزنی باکتری و معادلmg/g  536.08 به دست آمد. ایزوترم‌­های جذب­‌زیستی با استفاده از مدل­‌های لانگمویر، فرندلیچ و دابینین- رادوشکویچ تحلیل شد. برای جاذب‌­زیستی، مدل لانگمویر (0.983=R2) بهترین برازش را با داده­‌های تعادلی از خود نشان داد و بیشینه ظرفیت به دست آمده از این مدل برای این جاذب‌­زیستی 588.23 و برای کیتوزان خالص mg/g 454.54 بود. در نتیجه، مطالعه‌­ی حاضر نشان داد که جاذب‌­زیستی تهیه شده می­‌تواند موردی مناسب برای جذب‌­زیستی اورانیم باشد.}, keywords_fa = {جذب‌زیستی,اورانیم (VI),باکتری,Pseudomonas Putida,کیتوزان}, url = {https://jonsat.nstri.ir/article_177.html}, eprint = {https://jonsat.nstri.ir/article_177_e1239afbbf4d548333409de69f7a0a6a.pdf} } @article { author = {A. Milani, S and Maraghe Mianji, B}, title = {Adsorptive Removal of 90Sr and 137Cs Radionuclides by Nb-Ge Doped Titanosilicate Nanoparticles from Liquid Radioactive Waste of Tehran Research Reactor}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {38}, number = {4}, pages = {58-66}, year = {2018}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {The Nb-Ge doped titanosilicate nanoparticles were synthesized using a hydrothermal method and their adsorptive behavior for 90Sr and 137Cs radionuclides was investigated in liquid radioactive waste of Tehran research reactor in a batch method. Crystalline phases and morphology of the synthesized samples were studied by X-ray diffraction (XRD) method and scanning electron microscopy (SEM) technique, respectively. Elemental analyses of the samples were performed using X-ray fluorescence (XRF) technique. Surface areas of the samples were measured by the BET method. The effects of  temperature, contact time, and pH of liquid radioactive waste were studied. The obtained results showed that the synthesized samples have a good potential for removal of Sr-90 and Cs-137 radioisotopes from liquid radioactive waste of Tehran research reactor and in general, for the liquid wastes treatment. The samples doped up to 25 wt% with equal amounts (50 wt%) of niobium and germanium, removed almost 98.5% of  137Cs and 86.3% of  90Sr from liquid radioactive waste of Tehran research reactor.}, keywords = {Doped Titanosilicate,Nb-Ge,Nanoparticles,Adsorptive Removal,90Sr and 137‌Cs}, title_fa = {حذف جذبی رادیونوکلوئیدهای 90Sr و 137Cs از پسماند مایع پرتوزای راکتور تحقیقاتی تهران به وسیله‌ی نانوذرات تیتانوسیلیکات آلاییده شده با Nb و Ge}, abstract_fa = { نانوذرات تیتانوسیلیکات آلاییده شده با Nb و Ge، به روش آب- گرمایی ساخته شده و توانایی آن‌­ها در حذف رادیونوکلوئیدهای 90Sr و 137Cs از پسماند­ مایع پرتوزای راکتور تحقیقاتی تهران در روش ناپیوسته ارزیابی شد. فاز بلوری و ریخت‌­شناسی نمونه­‌های ساخته شده، به ترتیب با استفاده از پراش­‌سنجی پرتو ایکس (XRD) و میکروسکوپ الکترون پویشی (SEM) بررسی شد. تجزیه­‌ی عنصری نمونه‌­های جاذب با استفاده از فلوئورسانی پرتو ایکس (XRF) به انجام رسید. مساحت سطح نمونه­‌های ساخته شده، با استفاده از جذب و واجذب نیتروژن (­BET) اندازه‌­یابی شد. اثر پارامترهای دما، زمان ماند و pH پسماند بر میزان حذف رادیونوکلوئیدهای 90ُSr و 137Cs بررسی شد. یافته‌­ها نشان داد که نمونه­‌های ساخته شده، از توانایی خوبی برای جذب این رادیونوکلوئیدها از پسماند مایع پرتوزای راکتور تحقیقاتی تهران و به طور کلی آمایش پسماندهای مایع برخوردارند. نمونه­‌های تیتانوسیلیکات آلاییده شده تا 25 درصد وزنی با درصد­های وزنی مساوی (­50%) از Nb و Ge، تقریباً ­98.5% از 137Cs و 86.3% از 90Sr را از پسماند حذف کرد.}, keywords_fa = {تیتانوسیلیکات آلاییده شده,نیوبیم- ژرمانیم,نانوذرات,حذف جذبی,90Sr و 137Cs}, url = {https://jonsat.nstri.ir/article_178.html}, eprint = {https://jonsat.nstri.ir/article_178_cc02bbc797a11a0904c142d5be37cca4.pdf} } @article { author = {Rezazadeh Azari, F and Valieghbal, M and Zarefarsani, B and Farahbood, A. H}, title = {Fabrication and Characterization of Polystyrene Shells for Laser Fusion Targets}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {38}, number = {4}, pages = {67-74}, year = {2018}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {In this article, the activities to fabricate the polystyrene micro-shells by the microencapsulation method for laser fusion targets are presented. To reduce the Rayleigh-Taylor hydrodynamic instabilities in the process of target compression, the target requires a spherical symmetry, excluding any impurity with pre-defined elemental distribution. The polystyrene shells have wall thickness 27±2 µm and diameter 750±50µm, respectively. The transmission holographic Mach-Zehnder interferometer method has been utilized to characterize the micro-shell quality by measurement of the wall thickness and nonuniformity of the micro-shells.}, keywords = {Inertial Confinement Fusion (ICF),Microencapsulation (MEC),Digital Holographic Microscopy (DHM)}, title_fa = {ساخت و مشخصه‌یابی پوسته‌های پلی‌استایرنی برای هدف‌های گداخت لیزری}, abstract_fa = {در این مقاله، فعالیت­‌های صورت گرفته به منظور ساخت پوسته‌­های پلی­استایرنی هدف به روش ریز کپسول­‌سازی برای استفاده در گداخت لیزری بررسی شده است. ضروری است کپسول­‌های هدف دارای ساختاری­ کاملاً کُروی، متقارن و از نظر ترکیب شیمیایی عاری از هرگونه نا­خالصی با توزیع عنصری مشخص باشند تا از ناپایداری­‌های هیدرودینامیکی طی فرایند فشرده‌­سازی هدف تا حد امکان کاسته شود. ضخامت دیواره و قطر پوسته­‌های کُروی ساخته شده به ترتیب μm 27±2 و μm 750±50 است. به منظور بررسی کیفیت پوسته­‌ها و تعیین ضخامت و نایکنواختی دیواره­‌ی آن‌ها از روش تمام­نگاری بر پایه­‌ی تداخل­سنج ماخ- زندر استفاده شده است.}, keywords_fa = {گداخت محصورسازی اینرسی,ریز کپسول‌سازی,تمام نگار دیجیتال میکروسکوپی}, url = {https://jonsat.nstri.ir/article_179.html}, eprint = {https://jonsat.nstri.ir/article_179_bf39f14c28c011bcbed41f358924adf8.pdf} } @article { author = {Fotokian, M. H}, title = {Induction of Mutation for Traits Related to Pod in Rapeseed (Brassica Napus L.) Cultivars Using Gamma Rays}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {38}, number = {4}, pages = {75-83}, year = {2018}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {The grains of cultivars Rapeseed Sarigol and RGS003 were irradiated with gamma rays at doses 0, 800, 1000 and 1200 Gary (GY). For M2 generation, the grain of each plant was cultivated in a separate row and all plants were individually investigated during cultivation. According to the observed changes in agronomic traits such as pod length, the number of pods and flowering during M2 generation, 18 and 12 candidate mutant lines were obtained from Sarigol and RGSOO3, respectively. The differences among gamma rays doses were not statistically significant for seed sterility, while they were significant for pollen sterility at the level of 1%. Maximum pollen sterility was observed in 800 GY. Induced mutations in RGS003 and Sariglo cultivars were mostly obtained in 1200 and 800 GY, respectively. The M3 mutant lines in both Rapeseed cultivars contained a variation on traits such as the number of pod per the main stem, the number of pod per plant, pod length, the number of grain per pod, grain weight and flowering duration.}, keywords = {Gamma Rays,Induced Mutation,Rapeseed (Brassica Napus L.),Pod Length,Mutant}, title_fa = {ایجاد جهش در صفات مرتبط با خورجین در ارقام کلزا با استفاده از اشعه‌ی گاما}, abstract_fa = {بذور ارقام کلزای ساری گل و RGS003 با اشعه­ی گاما در دزهای °، 800، 1000 و Gy1200 تیمار شدند. در نسل 2M، بذر هر بوته در یک ردیف جداگانه کشت شد و کلیه­‌ی بوته­‌های هر لاین در طول فصل زراعی بررسی شدند. در این نسل تعداد 18 لاین موتان از رقم ساری گل و 12 لاین موتان از رقم RGS003 با توجه به تغییرات مشاهده شده در صفات زراعی مانند طول خورجین، تعداد خورجین و زمان گل­دهی به دست آمد. بین دزهای اشعه‌­ی گاما از نظر عقیمی دانه­‌ی گرده، تفاوت معنی­‌دار در سطح احتمال 1% مشاهده شد، ولی این تفاوت برای عقیمی بذر معنی­‌دار نبوده است. حداکثر عقیمی دانه‌­ی گرده در دز Gy800 مشاهده شد. بیش­تر موتان­‌های به دست آمده در ارقام RGS003 و ساری گل به ترتیب در دزهای 1200 و Gy800 به دست آمدند. در نسل 3M، موتان­‌های به دست آمده در هر دو رقم کلزا برای صفاتی مانند تعداد خورجین در ساقه­‌ی اصلی، تعداد خورجین در بوته، طول خورجین، تعداد دانه در خورجین، وزن هزار دانه و طول دوره­‌ی گل­دهی تغییرات داشتند.}, keywords_fa = {اشعه‌ی گاما,جهش مصنوعی,کلزا,طول خورجین,موتان}, url = {https://jonsat.nstri.ir/article_180.html}, eprint = {https://jonsat.nstri.ir/article_180_d0eb9f89227000ed8f63dd9ab61b2ebf.pdf} } @article { author = {Rezaee, M and Ansarifar, Gh. R and NasriNasrabadi, M}, title = {Investigation of the Al2O3/ Water Nano-Fluid Concentration and Size Effects on the Neutronics and Thermal-Hydraulic Parameters in the VVER-1000 Nuclear Reactor Using Artificial Neural Networks}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {38}, number = {4}, pages = {84-97}, year = {2018}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Nowadays, many researches have been done to improve the efficiency of the nuclear power plants, one of which is the use of the dual cooled annular fuel which is an internally and externally cooled annular fuel with many advantages in heat transfer characteristics. Also, some studies have suggested that the usage of the nanoparticles in a fluid as nano-fluid can provide dramatic improvements in the thermal properties of fluid. Howere, the  usage of neutronics and the thermal hydraulic codes in order to investigate the nano-fluid effects in the nuclear reactors is complex, uneconomical and time consuming. Therefore, in this paper, to investigate the nano-fluid effects on the important parameters of the VVER-1000 nuclear reactor with dual-cooled annular fuel, effects of Al2O3/ water nano-fluid concentration and size on neutronics and the thermal-hydraulic parameters in the VVER-1000 nuclear reactor are investigated using a proper Artificial Neural Network. Results show that the trained Neural Network has good convergence and accuracy in determination of the neutronics and the thermal-hydraulic parameters. Using the presented Neural Network, important reactor parameters can be determined without neutronics and the thermal hydraulic codes, thus saving time.}, keywords = {Nanofluid,Annular Fuel,Nuclear Reactor,Neutronic Parameters,Thermal-Hydraulic Parameters,Artificial Neural Networks}, title_fa = {بررسی اثر غلظت و اندازه‌ی نانوسیال آب/ آلومینا بر پارامترهای نوترونیکی و ترموهیدرولیکی در راکتور هسته‌ای 1000-VVER با مجتمع‌های سوخت حلقوی با استفاده از شبکه‌های عصبی مصنوعی}, abstract_fa = { امروزه برای بهبود راندمان نیروگاه‌­های هسته‌ای، پژوهش­‌های زیادی از جمله استفاده از میله­‌ی سوخت حلقوی با قابلیت خنک‌‌شوندگی از داخل و خارج که مزایای فراوانی در بهبود ویژگی­‌های انتقال حرارت دارد صورت گرفته است. هم­چنین برخی مطالعات نشان داده است که استفاده از ذرات نانو در سیال خنک‌کننده منجر به بهبود خواص حرارتی سیال می­‌شود. استفاده از کدهای نوترونیکی و ترموهیدرولیکی به منظور بررسی اثر نانوسیالات در راکتورهای هسته‌­ای، نیازمند شبیه‌­سازی­‌های پیچیده، دقیق و صرف هزینه­‌های اقتصادی و زمان زیاد است. در این مقاله تأثیر درصدهای حجمی و اندازه­‌ی نانو ذره­ی آلومینا بر پارامترهای نوترونیکی و ترموهیدرولیکی راکتور 1000-VVER با استفاده از یک شبکه­‌ی عصبی مناسب بررسی می­‌شود. نتایج حاصل، نشان­‌دهنده­‌ی این مطلب است که شبکه­‌ی عصبی آموزش داده شده، هم­‌گرایی مناسب و دقت کافی در تعیین پارامترهای نوترونیکی و ترموهیدرولیکی دارد. با استفاده از شبکه­‌ی عصبی ارائه شده، می­توان پارامترهای اساسی یک راکتور را بدون استفاده از کدها و نرم­افزارهای نوترونیکی و ترموهیدرولیکی تعیین کرد که  باعث صرفه­‌جویی زمانی می‌­شود.}, keywords_fa = {نانوسیال,سوخت حلقوی,راکتور هسته‌ای,پارامترهای نوترونیکی,پارامترهای ترموهیدرولیکی,شبکه‌ی عصبی مصنوعی}, url = {https://jonsat.nstri.ir/article_181.html}, eprint = {https://jonsat.nstri.ir/article_181_4d26d57746b00709b7d5b9539d16383b.pdf} }