@article { author = {Farajipour Ghahroudi, N and Kakuee, O and Yadollahzadeh, B}, title = {Imaging by the Use of Monochromatic X-Rays Induced by Proton Beam}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {39}, number = {4}, pages = {1-10}, year = {2019}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {10.24200/nst.2019.233}, abstract = {In this research work, commissioning of a radiography end station using proton-induced monochromatic X-rays in the Van de Graaff laboratory of Nuclear Science and Technology Research Institute (NSTRI) is reported. An energetic proton beam with a current of hundreds of nanoamps after passing through the relevant slits in the beam path, is used to irradiate a metallic target leading to the generation of monochromatic X-rays. By altering the target, a wide variety of monochromatic X-rays with different wavelengths could be generated. The yield of characteristic proton-induced X-ray emission is measured using a Silicon Drift Detector (SDD). The generated X-rays could then pass through the window of the reaction chamber and irradiate the sample of interest. In this way, the required conditions for radiography by the “K-edge contrast imaging” could be provided. By implementing the mentioned analytical technique, using the K-edge absorption of the interest element in the sample, radiographic image contrast could be improved for different samples of cultural heritage such as manuscripts, clothes, and coins in the Van de Graaff lab of NSTRI.}, keywords = {: Imaging,Proton-Induced X-Ray,Monochromatic X-Ray}, title_fa = {تصویرگیری با استفاده از پرتو ایکس تک انرژی پروتون- القایی}, abstract_fa = {این مقاله، راه‌اندازی جای­گاه انجام آزمایش پرتونگاری با استفاده از پرتو ایکس تک انرژی پروتون- القایی در آزمایشگاه واندوگراف پژوهشگاه علوم و فنون هسته‌ای را گزارش می‌کند. باریکه‌ی پروتون پرانرژی با شدت جریان چند صد نانو آمپر ضمن عبور از روزنه‌های مناسب در مسیر باریکه با یک هدف‌ فلزی برخورد و پرتو ایکس تک انرژی ایجاد می‌‌کند. باتغییر هدف، تنوع گسترده‌ای از پرتو ایکس تک انرژی با طول موج‌های مختلف قابل حصول است. بهره‌ی تولید پرتو ایکس مشخصه­ی پروتون- القایی با استفادهاز یک آشکارساز SDD اندازه­گیری می‌شود. با عبور پرتو ایکس از پنجره‌ی محفظه و برهم‌کنش آن با نمونه‌ی مورد نظر، شرایط لازم برای پرتونگاری با «تصویرگیری کنتراست لبه‌ی K» فراهم می‌‌شود. با راه‌اندازی روش آنالیز بیان شده‌ی استفاده­کننده از جذب لبه‌ی K عنصر مورد نظر در نمونه، امکان بهبود کنتراست تصویر پرتونگاری نمونه‌های مختلف میراث فرهنگی نظیر نمونه‌های نوشتاری، پارچه و سکه در آزمایشگاه واندوگراف پژوهشگاه علوم و فنون هسته‌ای فراهم شده است.}, keywords_fa = {تصویرگیری,پرتو ایکس پروتون- القایی,پرتو ایکس تک انرژی}, url = {https://jonsat.nstri.ir/article_233.html}, eprint = {https://jonsat.nstri.ir/article_233_f9da0a8ac693f2ad79d7e39df7a412ef.pdf} } @article { author = {Pazokian, H and Safaei, S and Amiri, H and Mollabashi, M}, title = {Fabrication of a T Shape Microfluidic Chip on PMMA by Laser Ablation and Welding}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {39}, number = {4}, pages = {11-20}, year = {2019}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {10.24200/nst.2019.231}, abstract = {Microfluidic chips are commonly used in many industrial and nuclear medicine applications. The biomolecules are labeled with radio nucleoids for increasing the image resolution in nuclear imaging. Labeling of biomolecules with radio nucleoids is an important subject in recent applications of the microfluidic chips. In this paper fabrication of a T-shape microfluidic chip on Polymethylmethacrylate (PMMA) polymer was investigated. The effect of the experimental parameters such as scanning velocity, pulse repetition rate, and laser fluences on the dimensions and the quality of the microchannels were investigated. A two-dimensional T-shape microchannel was fabricated on a PMMA sheet of 1cm×1cm×0.5cm, under the optimum experimental conditions. A polymer sheet with 2D-microchannels was welded to another PMMA sheet with laser welding for the formation of a 3-dimensional microfluidic chip. Two-dimensional microchannels were fabricated with CO2 and second harmonic of Nd:YAG lasers, both in pulsed mode of operation. Continues and pulse CO2 lasers were both used for welding and formation of three-dimensional microchannels}, keywords = {PMMA Polymer,CO2 laser,Nd:YAG laser,Microfluidic chip,laser ablation and welding}, title_fa = {ساخت تراشه‌ی ریز‌شاره‌ی T شکل در پلی‌مر پلی‌متیل متاآکریلات از طریق کندگی و جوش لیزری}, abstract_fa = {تراشه­های ریز‌شاره کاربردهای زیادی در صنایع مختلف به ویژه پزشکی و تصویرگیری هسته­ای دارند. در فرایند تصویرگیری، زیست­مولکول­های نشان­دار شده با رادیوایزوتوپ­ها به عنوان عامل­های وضوح تصویر برای تشخیص بیماری استفاده می­شود. نشان­دارسازی زیست­مولکول­ها با استفاده از رادیونوکلیدها از جمله‌ی کاربردهای مهم و اخیر تراشه­های ریز‌شاره است. این مقاله ساخت تراشه‌ی ساده‌ی آزمایشگاهی حاوی ریزکانال سه بعدی T شکل روی پلی­مر پلی‌متیل متاآکریلات (PMMA) را با استفاده از کندگی و جوش لیزری گزارش می­کند. بدین­منظور ابتدا با استفاده از کندگی لیزری ریزکانال­های دوبعدی با ابعاد و کیفیت متفاوت روی سطح پلی­مر ایجاد شد. به منظور دست­یابی به بهترین نسبت ابعادی برای ریزکانال اثر پارامترهای ماشین­کاری از جمله سرعت پایش، نرخ تکرار و شاریدگی روی ابعاد و کیفیت کانال­ها مورد بررسی قرار گرفته و شرایط بهینه برای ایجاد کانال مورد بررسی قرار گرفت. ریزکانال دو بعدی T شکل با استفاده از شرایط بهینه‌ی به دست آمده، روی سطح پلی­مری به ابعاد 1cm×1cm×0.5cmایجاد شد. پلی­مر حاوی ریزکانال­های دوبعدی T شکل با لایه‌ی دیگری از پلی­مر پلی‌متیل متاآکریلات توسط لیزر جوش داده شد. ریزکانال­های دوبعدی روی سطح پلی­مر با استفاده از لیزرهای تپی CO2 و هارمونیک دوم لیزر Nd:YAG ایجاد و برای اتصال از لیزر CO2 تپی و پیوسته استفاده شد.}, keywords_fa = {پلی‌مر پلی‌متیل متاآکریلات,تراشه‌ی ریز‌شاره,کندگی لیزری,جوش لیرزی}, url = {https://jonsat.nstri.ir/article_231.html}, eprint = {https://jonsat.nstri.ir/article_231_4cff907491084161d6977756d1603985.pdf} } @article { author = {Dadfar, Mahdi and Ansaripour, M and Heidarpour, A and Arasteh, Z}, title = {Effect of Pickling and Anodizing on Corrosion Behavior of VVER fuel Clads}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {39}, number = {4}, pages = {21-31}, year = {2019}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {10.24200/nst.2019.229}, abstract = {Recently, it has been declared that fuel rods do not need to be anodized for the usage in VVER reactors. In this regard, some studies were planned to investigate the effects of pickling and anodizing treatments on corrosion behaviour of the fuel clads produced by Sooreh company. For this reason, different surface treated samples of as-received, grinded, pickled, grinded and anodized, and pickled and anodized were prepared. The Russian fuel clads in some equal conditions were also employed for comparisons. The results revealed that corrosion behaviour is completely effected by the surface treatment, and microstructure properties have less impact. The oxidation type in the pickled, and pickled and anodized samples are absolutely different from the grinded samples. The anodizing treatment after pickling nearly increases the corrosion resistance by two times in comparison to just pickled ones. The presence of grey oxide layer on the grinded samples are attributed to Monoclinic zirconia which has less corrosion resistance to Tetragonal zirconia.}, keywords = {Zirconium clad,Surface treatment,Corrosion resistance}, title_fa = {تأثیر عملیات اسیدشویی و آندی کردن بر رفتار خوردگی غلاف‌های سوخت VVER}, abstract_fa = {اخیراً استفاده از آلیاژ زیرکنیم- نیوبیم آندی نشده به عنوان غلاف میله‌های سوخت VVER-1000ها مطرح شده است. در این راستا، به منظور بررسی تأثیر عملیات اسیدشویی و آندی کردن بر رفتار خوردگی غلاف‌های تولید شده در شرکت سوخت رآکتورهای هسته‌ای (سوره) مطالعه‌هایی انجام شد. غلاف سوخت Nb%1-Zr در شرکت سوره در شرایط مختلف بدون عملیات سطحی، سنباده خورده و اسیدشویی شده؛ سنباده خورده و آندی شده، اسیدشویی و آندی شده تولید شد. نمونه‌های مرجع نیز در حالت‌های مختلف برای مقایسه‌ی بهتر نتیجه‌ها مورد استفاده قرار گرفتند. از دستگاه مختصات ابعادی (CMM) برای اندازه‌گیری ابعاد، میکروسکوپ الکترون پویشی (SEM) برای تعیین ضخامت لایه‌ی اکسیدی، پراش پرتو ایکس (XRD) برای تعیین ماهیت لایه‌ی اکسیدی و اتوکلاو برای تعیین میزان خوردگی استفاده شد. یافته‌ها نشان داد که خوردگی به شدت متأثر از عملیات سطحی انجام شده روی نمونه‌ها است و ریزساختار در درجه‌ی دوم اهمیت قرار دارد. نوع اکسایش بعد از عملیات اسیدشویی یا اسیدشویی و آندی کردن کاملاً متفاوت از نوع اکسایش نمونه‌های سنباده خورده است. فرایند آندی کردن بعد از عملیات اسیدشویی تقریباً مقاومت خوردگی را نسبت به نمونه‌ای که تنها اسیدشویی شده است تا دو برابر بهبود بخشید. وجود لایه‌ی اکسیدی خاکستری روی نمونه‌های سنباده خورده به حضور غالب فاز زیرکنیای مونوکلینیک نسبت داده می‌شود که مقاومت خوردگی کم‌تری نسبت به فاز چهارگوشه‌ای دارد.}, keywords_fa = {غلاف زیرکنیم,عملیات سطحی,اسیدشویی,آندی کردن}, url = {https://jonsat.nstri.ir/article_229.html}, eprint = {https://jonsat.nstri.ir/article_229_35c21561978fd105e9e79f622ffa10f4.pdf} } @article { author = {Ranjbar, H and Faridi, F and Tajik, M}, title = {Comparison of the Effect of Absorbed Dose on Recurrence of Tumors in External Beam Radiation and Targeted Therapy}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {39}, number = {4}, pages = {32-38}, year = {2019}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {10.24200/nst.2019.232}, abstract = {Radiotherapy is the treatment of cancer using ionizing radiation. When a tumor is large in comparison to the range of the ionizing particles, most of the energy is absorbed within the tumor. In cases when the tumor dimensions are smaller than the range of ionizing particles, a large proportion of the energy can escape. Therefore, the tumor size and the range of the ionizing particles are important to be realized in the recurrence probability of tumors. The purpose of this study is to investigate the relationship of recurrence probability to tumor size and paricles energy in external radiotherapy and targeted radionuclide therapy. The absorbed fractions for spheres that ranged in radii from 20 µm to 4.5 cm were calculated using the MCNPX code. A mathematical model based on Poisson distribution was used to investigate the relationship of recurrence probability to tumor size for tumors treated with external beam radiotherapy and targeted 131I and 90Y. The results show that for targeted radionuclide therapy, the relationship between the recurrence probability and tumor size is different from that for external beam radiotherapy. The analysis shows that there is a minimum value of the recurrence probability that occures at a diameter of approximately 3.5 cm for 90Y. For 131I, the minimum recurrence occurs at a tumor diameter of approximately 3.5 mm. The results show that there is an optimal tumor size for the tumor curability. The recurrence probability has a minimum value for tumors whose diameters are close to the optimum value which depends on the particles energy. Smaller tumors are more recurrence because of the incompetent absorption of radiation energy, i.e., it dose not occure with the external beam iiradiation, and larger tumors are more recurrence because of the greater cell number. The results are shown that single agent targeted radiotherapy should not be used for treatment of disseminated cancers when multiple tumors of differing size may be present. The use of several radionuclides, including long-range and short-range beta emitters, concurrently or from combining targeted radiotherapy with external beam irradiation would be more effective than the reliance on a single radionuclide.    }, keywords = {Recurrence probability,targeted radiotherapy,external beam radiation,131I,90Y}, title_fa = {مقایسه‌ی تأثیر دز جذبی در دو شیوه‌ی پرتودرمانی خارجی و هدفمند بر عود دوباره‌ی تومور}, abstract_fa = {زمانی­که اندازه­ی تومور در مقایسه با برد ذره­های یوننده، بزرگ باشد بیش­تر انرژی ذره­ها در آن جذب می­شود و اگر کوچک­تر باشد مقدار زیادی از انرژی ذره­ها خارج خواهد شد. بنابراین اندازه­ی تومور و برد ذره­های یوننده نقش مهمی در عود دوباره­ی تومور خواهند داشت. هدف این پژوهش بررسی ارتباط احتمال عود دوباره­ی تومور با اندازه­ی تومور و انرژی ذره­ها در پرتودرمانی خارجی و هدفمند است. کسر دز جذبی برای کره­هایی به شعاع µm 20 تا cm 4.5 با استفاده از کد MCNPX محاسبه شد. به منظور بررسی رابطه­ی بین عود دوباره­ی تومور و اندازه­ی تومور درمان شده با پرتودرمانی خارجی و هدفمند با ید-131 و ایتریم-90، از یک مدل ریاضی مبتنی بر آمار پواسون استفاده شد. تحلیل­ها نشان داد که احتمال عود دوباره برای پرتودرمانی با ایتریم-90 برای تومورهای به قطر تقریباً cm 3.5 کمینه است در حالی­که برای پرتودرمانی با ید-131 این احتمال برای تومورهای به قطر تقریباً mm 3.5 کمینه است. از یافته­ها می­توان نتیجه گرفت که پرتودرمانی هدفمند با یک تک- رادیونوکلید نباید برای بیماران سرطانی دارای متاستازهای با اندازه­های مختلف و یا سرطان­های گسترش­یافته مورد استفاده قرار گیرد. استفاده از چند رادیونوکلید به طور هم­زمان یا ترکیب پرتودرمانی هدفمند با پرتودرمانی خارجی، می­تواند اثربخشی بیش­تری نسبت به استفاده از یک تک­ رادیونوکلید داشته باشد.}, keywords_fa = {احتمال عود دوباره,پرتودرمانی هدفمند,پرتودرمانی خارجی,ید- 131,ایتریم-90}, url = {https://jonsat.nstri.ir/article_232.html}, eprint = {https://jonsat.nstri.ir/article_232_162a7a41f9a2a5a0de3ee4b62768f5ce.pdf} } @article { author = {Yadollahi, A and Charkhi, A and Torab Mostaedi, M}, title = {Experimental Investigation of Effective Parameters in Thermal Decomposition of Thorium Oxalate}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {39}, number = {4}, pages = {39-50}, year = {2019}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {10.24200/nst.2019.248}, abstract = {In this study, the thermal decomposition of thorium oxalate dihydrate (Th(C2O4)2. 2H2O) was investigated by using design of experiment- technique. The thermal decomposition experiments were carried out in a two- temperature procedure and the influence of the decomposition temperature of the second step, as well as, durations of both steps on the crystallinity, size, size distribution, morphology and specific surface area of the produced thorium oxide were investigated. For this purpose the experiments were designed by using Taguchi method. The results showed that the optimum decomposition temperature and duration of the first and second heating stages were 400 °C for 4 hours and 750 °C for 4 hours, respectively. The powder characterization showed that the cubic thorium oxideparticles synthesized in the optimal conditions had uniform size distribution with an approximate size of 350 nanometers. Moreover, the crystallinity of ThO2 phase and specific surface area of these particles were 95% and 35.23(m2 g-1), respectively.}, keywords = {Thorium,thermal decomposition,Thorium Oxide,Thorium Oxalate,Taguchi}, title_fa = {بررسی تجربی پارامترهای مؤثر بر فرایند تجزیه‌ی گرمایی توریم اگزالات}, abstract_fa = {این مقاله فرایند تجزیه‌ی گرمایی توریم اگزالات آب‌دار را با استفاده از روش طراحی آزمایش مورد بررسی قرار می‌دهد. فرایند تجزیه‌ی گرمایی طی دو مرحله­ گرمادهی انجام شد و تأثیر پارامترهای زمان گرمادهی مرحله‌ی اول، دما و زمان گرمادهی مرحله‌ی‌ دوم بر بلورینگی فازی، اندازه، توزیع اندازه، ریخت‌شناسی و مساحت سطح ویژه‌ی توریم اکسید تولید شده مورد بررسی قرار گرفت. برای این منظور آزمایش­های مورد نظر به روش تاگوچی طراحی شد. بررسی­ها نشان داد که دمای 400 درجه‌ی سلسیوس، زمان 4 ساعت، دمای 750 درجه‌ی سلسیوس و زمان 4 ساعت به ترتیب، شرایط بهینه برای مرحله‌ی‌های اول و دوم گرمادهی بودند. نتیجه‌های مشخصه­یابی پودر تولید شده در شرایط بهینه نشان داد که ذره­های توریم اکسید، مکعبی­شکل با توزیع یکنواخت و اندازه‌ی متوسط 350 نانومتر بوده و درصد بلورینگی فاز   2 ThOو مساحت سطح ویژه‌ی ذره‌ها به ترتیب برابر با %95 و (1-g 2m) 35.23است.}, keywords_fa = {تجزیه‌ی گرمایی,توریم اکسید,توریم اگزالات,روش تاگوچی}, url = {https://jonsat.nstri.ir/article_248.html}, eprint = {https://jonsat.nstri.ir/article_248_90e314df89f68751bd98f50585628cd9.pdf} } @article { author = {Davarkhah, R and Salimi, B and Tavasoli, M and Zahaki Far, F and Farahmand Asl, E and Samad Fam, M and zaheri, P}, title = {Selective Extraction of Yttrium (III) in Aqueous Media Using Liquid Membrane}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {39}, number = {4}, pages = {51-63}, year = {2019}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {10.24200/nst.2019.237}, abstract = {2-Thenoyltrifluoroacetone (HTTA) has been proposed as a carrier in organic phase for the transport and selective extraction of yttrium using bulk liquid membrane system. The liquid membrane was prepared by dissolving HTTA in dichloromethane. It has been observed that the use of n-propylamine (n-PA) in source phase as a synergistic agent causes an enhancement in transport of yttrium ions. The extraction and stripping conditions have entirely been evaluated and described. The proposed method has been utilized for the separation of yttrium (III) from its binary mixtures with strontium (II) and some other cations such as Ni (II), Co (II), Ag (I), Fe (II), Al (III), Cu (II), Hg (II) and Cs(I) in aqueous solutions of pH 5.4 in the presence of n-PA, while 1M nitric acid was serving as a stripping agent in the receiving compartment. Cyanide ion and 5-sulfosalicylic acid have been used as masking agents to minimize the interferences from different transition metal ions and Al (III) in source phase,respectively.At the achieved optimized conditions and a discrete experiment, 90Y in secular equilibrium with 90Srin the source phase, was transferred into receiving phase and separated completely from its long-lived parent isotope.    }, keywords = {Selective Extraction Separation,Liquid membrane,Yttrium (III),Thenoyltrifluoroacetone}, title_fa = {استخراج انتخابی ایتریم (III) در محیط‌های آبی با غشای مایع}, abstract_fa = {2- تنوئیل تری فلوئورواستن (HTTA) در دی کلرومتان به عنوان حامل برای استخراج انتخابی و انتقال ایتریم به کمک سیستم غشای مایع استفاده شد. یافته­ها نشان داد که به کارگیری نرمال­پروپیل­­آمین (n-PA) در فاز دهنده موجب افزایش استخراج یون­های ایتریم می­شود. شرایط فرایندهای استخراج و عریان­سازی به لحاظ تجربی کاملاً ارزیابی و توصیف شده­اند. روش پیشنهادی برای جداسازی ایتریم (III) از مخلوط­های دوتایی آن با استرانسیم (II) و برخی کاتیون­های دیگر نظیر Cu (II)، Co (II)، Ni (II)، Fe (II)، Ag (I)، Al (III)، Hg (II)و Cs (I) در محلول­های آبی با 5.4 pH و در حضور n-PA به کار گرفته شد. از نیتریک اسید M 1 به عنوان عریان­ساز در فاز گیرنده استفاده شد. مزاحمت ناشی از یون­های فلزهای واسطه­ی گوناگون و (III) Al به ترتیب با استفاده از یون سیانید و 5- سولفوسالیسیلیک اسید به عنوان عامل­های استتارگر در فاز دهنده به حداقل مقدار خود رسانده شد. تحت شرایط بهینه­ی به دست آمده و در آزمایش انتقال جداگانه­ای، Y90 که در تعادل با Sr90 در فاز دهنده قرار داشت، به طور کامل به فاز گیرنده انتقال داده شد و از ایزوتوپ مادرِ عمر- طولانی خود جدا گردید.  }, keywords_fa = {‌استخراج انتخابی,غشای مایع,ایتریم(III),تنوئیل تری فلوئورواستون}, url = {https://jonsat.nstri.ir/article_237.html}, eprint = {https://jonsat.nstri.ir/article_237_6fad4c1ffdf1d7bf3d465c794ffde0c5.pdf} } @article { author = {Darban Khodadadi, A and Seddighi, H and Fasihi, J and Koleini, M. J}, title = {Kinetic, Thermodynamic and Adsorption Mechanism of Uranium (VI) Ions from Aqueous Solutions Using Mg/Al Layered Double Hydroxide}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {39}, number = {4}, pages = {64-74}, year = {2019}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {10.24200/nst.2019.228}, abstract = {Layered double hydroxide (Mg/Al; 3:1) was synthesized by co-precipitation method and used to adsorb uranium from aqueous solutions. Various environmental parameters such as contact time, pH, initial uranium concentration and temperature were investigated. The maximum adsorption capacity occurred at pH=3 (99 mg/g). The adsorption of U(VI) onto LDH decreased with increasing pH at pH>6.5, because of the formation uranyl carbonate complexes (69 mg/g). The thermodynamic parameters (i.e., ΔH0, ΔS0 and ΔG0) indicated that the adsorption process of U(VI) on LDH was an endothermic and spontaneous process. At pH<6.5, the probable mechanism of adsorption of U(VI) was governed by inner-sphere surface complexation with OH groups on LDH surfaces, while the dominant mechanism at pH>6.5 was inner-sphere surface complexation and ion exchange with NO3¯. Based on the experimental results, LDH is a very suitable material for the removal of U(VI) ions from aqueous solutions in a wide range of pH.      }, keywords = {Mg/Al Layered Double Hydroxide,Uranium (VI),Kinetic,Thermodynamic}, title_fa = {سینتیک، ترمودینامیک و سازوکار جذب یون‌های اورانیم (VI) از محلول‌های آبی با استفاده از هیدروکسید لایه‌ای دوگانه‌ی منیزیم- آلومینیم}, abstract_fa = {(با عرض پوزش به دلیل عدم دسترسی به تایپ فرمول لطفا اصل چکیده را از متن پی دی اف مطالعه فرمایید) هیدروکسید لایه­ای دوگانه­ی منیزیم- آلومینیم (3:1LDH Mg/Al;) با روش هم­رسوبی ساخته شد و برای جذب اورانیم از محلول­های آبی مورد استفاده قرار گرفت. اثر پارامترهای محیطی مختلفی مانند pH، غلظت اورانیم (VI)، زمان تماس و دما بر فرایند جذب مورد بررسی قرار گرفت. بیشینه ظرفیت جذب (1-mg g 99) در 3 pH رخ می­دهد و با افزایش pH به بالاتر از 5/6 به دلیل تشکیل کمپلکس­های کربناته­ی اورانیل کاهش می­یابد (1-mg g 69). پارامترهای ترمودینامکی (0ΔH، 0ΔS و 0ΔG) مشخص کرد که فرایند جذب اورانیم (VI) بر روی LDH گرماگیر و خود به خودی است. در pHهای پایین­تر از 5/6، سازوکار غالب جذب اورانیم احتمالاً تشکیل کمپلکس­های سطحی درون- کره­ای با گروه­های OH در سطح LDH است، در حالی که در pHهای بالاتر از 5/6 تشکیل کمپلکس­های سطحی برون- کره­ای و تبادل با یون­های -3NO در شبکه­ی LDH غالب است. براساس داده­های به دست آمده، LDH ماده­ای بسیار مناسب برای جذب یون­های اورانیم از محلول­های آبی در بازه­ی گسترده­ای از pH است.}, keywords_fa = {هیدروکسید لایه‌ای دوگانه منیزیم- آلومینیم,اورانیم (VI),سینتیک,ترمودینامیک}, url = {https://jonsat.nstri.ir/article_228.html}, eprint = {https://jonsat.nstri.ir/article_228_5d33f59c29e5dd3a9abbf8062287a615.pdf} } @article { author = {Naderi, A and Ghoreishi, S. M and Firozzare, M and Almasian, M. R}, title = {Production and Modification of Poly(Styrene-Acrylonitrile)-Polycarbonate Nanofibers and Evaluation of its Adsorption Behavior on Uranium in Aqueous Solutions}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {39}, number = {4}, pages = {75-84}, year = {2019}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {10.24200/nst.2019.235}, abstract = {The removal and recovery of uranium from aqueous media has been considered by many of scientists and researchers since a long time ago. In this work it has been tried to produce the nano adsorbent that be able to separate the uranium from nuclear waste waters and the other aqueous media. For this purpose poly(styrene-acrylonitrile) nanofibers and their composite with polycarbonate nanofibers have been prepared and used as adsorbent of uranium after chemical modification. The chemical modification was performed by the conversion of nitrile groups to amidoxime groups by hydroxyl amine solution and akaline treatment by sodium hydroxide 2.5%. The amidoximation was confirmed by infrared spectroscopy. The maximum capacities of uranium adsorption were 79.8 and 38.5 mg U/g ads for poly(styrene-acrylonitrile) and poly(styrene-acrylonitrile)/polycarbonate composite respectively. The optimum pH was 4 for uranium adsorption. The desorption yield was more than 90% in  Na2CO3 1M /H2O2 1M solution.}, keywords = {}, title_fa = {تولید و اصلاح نانوالیاف پلی‌استایرن‌آکریلونیتریل- پلی‌کربنات و بررسی رفتار جذبی آن نسبت به اورانیم در محیط‌های آبی}, abstract_fa = {حذف و بازیابی اورانیم از محیط­‌های آبی از دیرباز مورد توجه دانشمندان و پژوهش­گران این عرصه بوده است. در این پژوهش سعی شده است با تولید نانوجاذب نانوالیاف پلی­استایرن آکریلونیتریل و چندسازه‌ی آن با پلی­کربنات با روش نیروریسی و اصلاح شیمیایی آن­ها، امکان جداسازی اورانیم از پس‌آب‌های هسته‌­ای و دیگر محیط‌های آبی فراهم شود. اصلاح شیمیایی این نانوالیاف با تبدیل گروه‌های نیتریل به آمیدوکسیم در محلول هیدروکسیل آمین و سپس قلیایی کردن آن­‌ها در محلول سدیم‌هیدروکسید 2.5 درصد صورت پذیرفت. طیف‌بینی زیرقرمز، تبدیل گروه­‌های نیتریل به گروه‌­های آمیدوکسیم را اثبات کرد. ظرفیت جذب بیشینه برای پلی­استایرن­آکریلونیتریل برابر با 79.8 میلی­گرم اورانیم بر گرم جاذب و برای چندسازه‌ی آن با پلی­کربنات برابر با 38.5 میلی­گرم اورانیم بر گرم جاذب به دست آمد. با بررسی اثر pH محیط مشخص شد که بهترین عملکرد جذبی در 4 pH واقع می‌شود. در نهایت واجذب اورانیم از این جاذب با محلول 1 مولار Na2CO3 و H2O2 بررسی و بهره­‌ی واجذب بیش از 90% تعیین شد.}, keywords_fa = {جاذب,اورانیم,نانوالیاف,پلی‌استایرن‌آکریلونیتریل,پلی‌کربنات}, url = {https://jonsat.nstri.ir/article_235.html}, eprint = {https://jonsat.nstri.ir/article_235_f4cf4784d277ff951fdc3c54e5f9b249.pdf} } @article { author = {Fatemi, K and Taghinejad kord, M and H. zare, M and fARHADI, A. H}, title = {Recovery and Purification of Uranium from Rejected-Prototype Fuel Plates with Use Innovative Method}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {39}, number = {4}, pages = {85-92}, year = {2019}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {10.24200/nst.2019.239}, abstract = {In nuclear research reactor fuel producing factories, in order to recover uranium from aluminum plate scraps of oxide fuel, the dissolving process in the caustic soda and nitric acid and, ultimately, the solvent extraction process for the purification of uranium from the UNH are used. In this research, the results of separation and purification of uranium from scraps of aluminum oxide fuel plates are reported in a new and different method and without the solvent extraction process. In this method, the virtual plate fuel fragments containing U3O8 were dissolved in caustic soda solution. Then, the suspension obtained from dissolution of the aluminum sheath, together with particles of U3O8 was reacted with 40% HF solution. The product obtained was subjected to heat treatment to oxidize its U+4 by air oxygen. Next, the uranium in the product oxidized by the leaching process was leached and separated from the impurities and was precipitated in the form of the very pure compounds of AUC and ADU. These intermediaries were converted into pure U3O8 by calcination. The results of the analyzes show that U3O8 produced in this way have higher purity compared to U3O8 produced from pure UF6  as well as from U3O8 from defective actual oxide fuel plates which in scientific sources have been purified by the solvent extraction process from the UNH. At the same time, in this method two samples of pure U3O8 powder with grain size of 86% and 94% (above 45 microns) are also produced directly from ammonium bicarbonate leached solutions through formation of AUC sedimentation, the characteristics of which recommend the applicability of this method in terms of chemical purity and grain size of U3O8 produced for enriched uranium in a fuel plate manufacturing line.}, keywords = {Aluminum Plate Scrap,Fuel Plate,Thermal Treatment,Leaching,Precipitation,Uranium}, title_fa = {بازیابی اورانیم از صفحه‌های سوخت بدل و تخلیص آن با روش‌های رسوب‌‌گیری ترکیبی}, abstract_fa = {این مقاله جداسازی و تخلیص اورانیم از ته‌ماند‌های صفحه‌های آلومینیمی سوخت اکسیدی بدل به شیوه­‌ی رسوب­‌گیری ترکیبی را گزارش می­‌کند. در این روش ابتدا قطعه‌های صفحه­‌های سوخت بدل حاوی U3O8 در محلول سود حل و سوسپانسیون حاصل، با محلول 40 درصد HF وارد واکنش شد. محصول به دست آمده تحت عملیات گرمایی قرار گرفت تا اورانیم چهار ظرفیتی آن توسط اکسیژن هوا اکسید شود. در ادامه اورانیم، از ناخالصی‌­ها فروشویی و جداسازی و به شکل ترکیب‌های خیلی خالص آمونیم اورانیل کربنات (AUC) و آمونیم دی اورانات (ADU) رسوب داده شد. این حد واسط­ها با عملیات تکلیس به 8O3U خالص تبدیل شد. داده­های تجزیه‌های عنصری نشان داد که 8O3U تولید شده با این روش در مقایسه با 8O3U به دست آمده از UF6 خالص و هم­چنین از U3O8 تولید شده از صفحه‌های معیوب واقعی سوخت اکسیدی که با فرایند استخراج با حلال از محیط اورانیل نیترات هگزا هیدرات (UNH) در منابع علمی خالص‌سازی شده‌­اند، از خلوص بالاتری برخوردار است. هم­زمان دو نمونه­‌ی پودر U3O8خالص با دانه­‌بندی 86 و 94 درصد بالای µm 45 مستقیماً از محلول­‌های فروشویی بی­کربنات آمونیم با تشکیل رسوب آمونیم اورانیل کربنات نیز تولید شد که مشخصه‌های آن­‌ها قابلیت کاربرد این شیوه را از نظر خلوص شیمیایی و اندازه‌ی دانه‌بندی U3O6 تولید شده برای اورانیم غنی شده در خط تولید صفحه­‌های سوخت تأیید می‌­نماید.}, keywords_fa = {سوخت صفحه‌ای مجازی,عملیات حرارتی,لیچینگ,رسوب‌گیری,اورانیم}, url = {https://jonsat.nstri.ir/article_239.html}, eprint = {https://jonsat.nstri.ir/article_239_49ede2caefed079438adb359dbe9a47c.pdf} } @article { author = {Fatemi, F and Jahani, S and Miri, S}, title = {The Effect of Peptone and Tryptic Soy Broth (TSB) on Uranium Bioleaching Efficiency}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {39}, number = {4}, pages = {93-99}, year = {2019}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {10.24200/nst.2019.238}, abstract = {One of the main challenges in uranium bioleaching process is events related to improvement, acceleration and enhancement of the extraction. One of these is to provide a favorable environment and biological conditions for Acidithiobacillus ferrooxidans. Whereas, the nutrients of bacteria medium have a significant impact on the activity and growth of bacteria, in the present study, 2 selective culture mediums were used in uranium bioleaching process at pulp densities of 2.5 and 12.5 %. The mediums are containing usual 9k and enriched 9k medium with peptone and TSB (Tryptic Soy Broth). Uranium bioleaching process using selective 2 mediums with different pulp densities were performed under optimum conditions. The results indicated that the uranium extraction at 2.5% pulp density, using 9k-New medium and 9k medium, have carried out during 2 and 3 days, respectively. In addition, at 12.5 % pulp density, the total uranium in the ore was extracted during 3 and 7 days using 9k-New and 9k mediums, respectively. Eh variations showed that the Eh in the 9k-New medium in compared with 9k medium were increased 13-22%. According to the results of this study, it can be concluded that the uses of nutrients such as peptone and TSB have significant impact on the activity of bacteria and also speed of uranium extraction. So, the optimization of 9k medium using peptone and TSB recommended on the uranium bioleaching process.}, keywords = {Bioleaching,Uranium,Peptone,Tryptic Soy Broth,Acidithiobacillus Ferrooxidans}, title_fa = {بررسی تأثیر پپتون و تریپتیک سوی براث (TSB) بر روی بازده‌ی زیست‌فروشویی اورانیم}, abstract_fa = {یکی از چالش‌­های اساسی در رابطه با زیست­فروشویی اورانیم، انجام اقدام­‌هایی برای بهبود، تسریع و افزایش بازده­ی فرایند استخراج است. از جمله­ی این اقدام‌­ها، فراهم نمودن شرایط محیطی و زیست­‌شناختی مطلوب برای باکتری اسیدی تیوباسیلوس فرواکسیدان است. از آن­جایی که مواد مغذی محیط کشت باکتری تأثیر بسزایی بر روی عملکرد و رشد باکتری پیش­گفته دارد، از این­رو، در پژوهش حاضر از 2 محیط کشت مجزا در فرایند زیست­‌فروشویی اورانیم در چگالی پالپ‌­های 2.5 و 12.5 درصد، به صورت مقایسه­‌ای، استفاده شده است. محیط کشت­‌های انتخابی شامل محیط کشت متعارف 9k و محیط کشت غنی شده­‌ی 9k با پپتون و تریپتیک سوی براث (TSB) است. فرایند زیست‌­فروشویی اورانیم با استفاده از این 2 محیط کشت و چگالی پالپ­‌های انتخابی در شرایط بهینه انجام پذیرفت. نتیجه­‌های حاصل از چگالی پالپ 2.5 درصد نشان داد که استخراج اورانیم با استفاده از محیط کشت 9k جدید، 2 روز و با استفاده از محیط کشت 9k، متعارف 3 روز به طول انجامید. هم­چنین، کل اورانیم موجود در سنگ در چگالی پالپ 12.5 درصد با استفاده از محیط کشت 9k جدید و 9k متعارف به ترتیب در مدت 3 و 7 روز استخراج شد. میزان تغییرات Eh با استفاده از 2 محیط کشت و چگالی پالپ­‌های انتخابی نشان داد که مقدار Eh در محیط کشت 9k جدید به نسبت 9kبه میزان 13 تا 22 درصد افزایش داشته است. با توجه به داده­‌های تجربی به دست آمده در این پژوهش می‌­توان نتیجه گرفت که استفاده از مواد مغذی هم­چون پپتون و تریپتیک سوی براث تأثیر بسیار زیادی بر روی عملکرد و فعالیت باکتری و در نتیجه سرعت استخراج اورانیم داشته است و با بهینه‌­سازی شرایط، استفاده از محیط کشت 9kبه همراه پپتون و تریپتیک سوی براث در فرایند زیست‌­فروشویی اورانیم توصیه می‌­شود.}, keywords_fa = {زیست‌فروشویی,اورانیم,پیتون,تریپتیک سوی براث,اسیدی تیوباسیلوس فرواکسیدان}, url = {https://jonsat.nstri.ir/article_238.html}, eprint = {https://jonsat.nstri.ir/article_238_d4567edebb8ed8d08056fc296c70d4cd.pdf} } @article { author = {E. Almas, D and Navab Pour, S and Yamchi, A and Zeinli Nejad, Kh and Momeni, A and Mirzaghaderi, Gh}, title = {Evaluation of several important defense enzyme activities in mutant rice resistant to blast disease}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {39}, number = {4}, pages = {100-108}, year = {2019}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {10.24200/nst.2019.236}, abstract = {Blast disease, caused by fungus Magnaporthe grisea (Hebert) Barr, with asexual form Pyricularia grisea (Cooke) Sacc, is the main fungal disease of rice in the tropical and temperate regions of the world and Iran. Mutant plants derived from mutation breeding due to having the same genetic background with their wild-type are useful experimental material for comparative analysis and dissecting molecular mechanisms. For this purpose, seeds of two rice genotypes including mutant variety (Pooya) and its wild-type parent cultivar (Mosatarom) were prepared from Rice Research Institute of Iran and used in greenhouse tests. Evaluation of resistance components showed that Pooya mutant variety was resistant and Mosatarom cultivar was susceptible. Biochemical analysis under control and inoculated conditions revealed that enzyme activities of catalase, peroxidase, polyphenol oxidase in the Pooya mutant variety was more than, while TBARM index was lower than Mosatarom cultivar. According to the positive role of defense enzymes in controlling disease progression, Pooya mutant variety had better than its wild-type parent cultivar against blast disease due to the maximum defense enzyme activity.}, keywords = {Defense enzymes,Mutant variety,Rice,Blast disease,Resistance}, title_fa = {ارزیابی فعالیت برخی از آنزیم‌های دفاعی مهم در برنج جهش‌یافته‌ی مقاوم به بیماری بلاست}, abstract_fa = {بیماری بلاست، که توسط قارچ مگناپورت گریسیا، با فرم غیرجنسی پریکولاریا گریسیا، ایجاد می‌شود از مهم‌ترین بیماری‌های قارچی برنج در منطقه‌های گرمسیری و معتدل دنیا و هم‌چنین ایران است. گیاهان جهش‌یافته‌ی حاصل از اصلاح جهشی به دلیل داشتن زمینه‌ی ژنتیکی یکسان با والدشان، مواد آزمایشی مناسبی برای تجزیه‌های مقایسه‌ای و تشریح سازوکارهای مولکولی هستند. بدین منظور در آزمایشیبذرهای دو ژن‌مانه­ی برنج شامل رقم جهش‌یافته‌ی (پویا) و رقم والد مربوط به آن (موسی‌طارم) از مؤسسه‌ی تحقیقات برنج ایران تهیه شده و در آزمایش‌های گلخانه‌ای مورد استفاده قرار گرفتند. ارزیابی مؤلفه‌های مقاومت نشان داد که رقم جهش‌یافته‌ی پویا دارای نوع مقاوم و رقم موسی‌طارم دارای نوع حساس هستند. بررسی‌های زیست‌شیمیایی در شرایط کنترل و القای بیماری نشان داد که میزان فعالیت آنزیم‌های کاتالاز، پراکسیداز و پلی‌فنول ‌اکسیداز در رقم‌ جهش‌یافته‌ی پویا بیش‌تر از رقم موسی‌طارم بود، درحالی‌که میزان اکسایش سلولی کم‌تری نسبت به آن داشت. با توجه به نقش مثبت آنزیم‌های دفاعی در کنترل پیشرفت بیماری بلاست، رقم‌ جهش‌یافته‌ی پویا با فعالیت بیش‌تر آنزیم‌های دفاعی وضعیت بهتری نسبت به رقم والد خود نشان داد که بیانگر مقاومت آن در برابر بیماری بلاست است.}, keywords_fa = {آنزیم‌های دفاعی,رقم موتانت,برنج,بیماری بلاست,مقاومت}, url = {https://jonsat.nstri.ir/article_236.html}, eprint = {https://jonsat.nstri.ir/article_236_136b8713a90b09a4635ddf474c7ab6b9.pdf} } @article { author = {Khorsandi, J and Asgari, A and Kavyani, P and Mokhtari, J}, title = {Design calculation of a vertical thermal neutron beam for neutron radiography at Esfahan MNSR}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {39}, number = {4}, pages = {109-117}, year = {2019}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {10.24200/nst.2019.234}, abstract = {In this paper, the MCNPX code is applied for feasibility study of using the Isfahan MNSR as a neutron source for neutron radiography. To produce a good neutron beam in terms of intensity and quality, the aluminum (Al) with thickness of 0.7 cm, and bismuth (Bi) and lead (Pb) with thickness of 1 cm are used as the fast neutron filter, and the gamma filter, respectively. The L/D ratio of the designed neutron radiography facility is 90 and the diverging angle is 2.1degree. The thermal neutron flux, the ratio of thermal neutron to gamma dose rate, and the thermal neutron content at the beam exit plane are evaluated 1.47E+05 n/cm2.s,  2.96E+06 n/cm2.mR, and 92.5%, respectively. If such thermal neutron beam is built in Isfahan MNSR, many practical and scientific applications of the NR would be realized.}, keywords = {}, title_fa = {طراحی باریکه‌ی نوترون گرمایی عمودی در رآکتور مینیاتوری اصفهان به منظور پرتونگاری نوترونی}, abstract_fa = { ( با عرض پوزش به دلیل عدم امکان تایپ فرمول اصل چکیده را از روی پی دی اف مطالعه فرمایید) در این تحقیق، امکان­سنجی استفاده از رآکتور MNSR اصفهان به عنوان چشمه نوترون حرارتی برای پرتونگاری نوترونی انجام شده است. برای تولید یک باریکه با شدت و کیفیت مناسب از آلومینیم با ضخامت 0.7 سانتی­متر به عنوان فیلتر نوترون سریع و از بیسموت و سرب به ضخامت 1 سانتی­متر به عنوان فیلتر گاما بهره برده شده است. نسبت L/D سامانه پرتونگاری نوترونی شبیه‌سازی شده 90 و زاویه واگرایی برابر 2.1 درجه می‌باشد. در این طراحی شار نوترون حرارتی در محل تصویربرداری .s2n/cm 05 E+47/1، شار نوترون­های حرارتی به دز گاما /mR2 n/cm06E+96/2 و نسبت شار نوترون‌­های حرارتی به شار کل نوترون­‌ها 5/92% محاسبه شد. به کمک ساخت این سامانه پرتونگاری برای رآکتور MNSR می‌توان به بسیاری از کاربردهای عملی و علمی یک سامانه پرتونگاری با نوترون دست یافت.}, keywords_fa = {رآکتور MNSR,پرتونگاری نوترونی,کد MCNPX,نسبت نوترون حرارتی به کل}, url = {https://jonsat.nstri.ir/article_234.html}, eprint = {https://jonsat.nstri.ir/article_234_4e34bd77c1240adad30f4d2340c5e195.pdf} }