@article { author = {Farahbod, A.H and Afshari, M and Agayari, E}, title = {Plasma Expansion in Laser-Target Interaction Process}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {32}, number = {4}, pages = {1-7}, year = {2012}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {In this paper, the behavior of temperature, density, velocity and pressure of the plasma shock front produced by the interaction of a focused Nd:YAG laser beam on a copper target, with an average pulsewidth of 30ns and 140mJ laser energy, have been studied using shadowgraphy technique. For this purpose, the plasma was examined in air at the pressure from 760 to 2×10-4 Torr by a laser probe beam of 10 ns pulsewidth at the wavelength of 532 nm. The results obtained from the measurements and by using the hydrodynamical model indicated that at atmospheric pressure the temperature and plasma pressure near the target surface increase up to 30 eV and 7×104 atm, respectively. The relative plasma density during the interaction time was found to be about 6 times of the air density at the normal atmospheric pressure. By decreasing the pressure from 760 Torr to 50 Torr the shock wave gradually converts to a rarefaction wave. For the pressure less than 0.1 Torr, only a dense region with an electron density higher than ≈3.94×1021 cm-3 near the target surface was observed.}, keywords = {Laser-Target Interaction,Shock Wave,Rarefaction Wave,Shadowgraphy,Ablation Pressure,Hydrodynamical Model}, title_fa = {گسترش پلاسما در فرایند برهم‌کنش لیزر- هدف}, abstract_fa = {در این مقاله رفتار پلاسمای ناشی از برهم­کنش تپ کانونی شده­ی لیزر Nd:YAG با پهنای میانگین ns30 و انرژی mJ140 با هدف مس با استفاده از روش سایه­نگاری مورد مطالعه و بررسی قرار گرفته است. برای این منظور گسترش پلاسما در محیط هوا در محدوده­ی فشاری 760 تا 4-10×2 تور به کمک هماهنگ دوم لیزر با پهنای ns 10 در طول موج nm532 مورد کاوش قرار گرفته است. ترکیب نتایج تجربی و مدل هیدرودینامیکی پلاسما نشان می­دهد که برای فشار محیط 1 اتمسفر، دما و فشار پلاسما در نخستین لحظات برهم­کنش در نزدیکی سطح هدف به ترتیب، تا 30 الکترون ولت و 104×7 اتمسفر افزایش می­یابد. در این حالت، چگالی نسبی پلاسمای حاصل در طی تپ برهم­کنش حدود 6 برابر چگالی هوا در فشار متعارفی است. با کاهش فشار محیط از 760 تور به حدود 50 تور، به تدریج موج ضربه­ای به موج رقیق­شدگی تبدیل می­شود و برای فشارهای کم­تر از 0.1  تور تنها یک ناحیه­ی چگال در نزدیکی سطح هدف با چگالی بیش از ≈3.94×1021 cm-3  قابل مشاهده است.}, keywords_fa = {برهم‌کنش لیزر- هدف,موج ضربه‌ای,موج رقیق‌شدگی,سایه‌نگاری,فشار سایش,مدل هیدرودینامیکی}, url = {https://jonsat.nstri.ir/article_398.html}, eprint = {https://jonsat.nstri.ir/article_398_be82cecfc44286c071382a268bf989ed.pdf} } @article { author = {Aram, M.R}, title = {Design and commissioning of the Seismicity Network of Darkhovein Nuclear Power Plant (IR360)}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {32}, number = {4}, pages = {8-15}, year = {2012}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {The study of micro seismicity and monitoring the micro seismic for the purpose of surveying the existing faults treatments and recognition of blind faults and other active tectonic structures in various phases of constructing the important structures, specially nuclear power plants, is unavoidable. According to IAEA safety guides and US-NRC regulatory guides, suitable instrumentation must be provided so that the seismic response of nuclear power plant features importantly from the safety point of view. According to R.G. 1.165 seismic monitoring by a network of seismic stations in the site area should be established as soon as possible after the site selection. Also, it is necessary to shutdown the nuclear power plant if vibratory ground motion exceeds the operating basis earthquake (OBE). The current research demonstrates the field works and studies for locating the local seismograph network in Darkhovein nuclear power plant. After the official studies and the primary visit of the old seismograph stations it was found that the mentioned network doesn’t cover completely the geological structures around the power plant. Therefore, new locations have been introduced through the field investigation and computational methods of optimization. In positioning the new stations, places with the least amount of noise and the best coverage for seismic sources were selected. The modeling with considering an imaginative station at the selected places shows that the thresholds of the complete records of earthquakes around Darkhovein site is under the magnitude 1 (about 0.8).  }, keywords = {Seismic Network,Noise,Nuclear Power Plant,Fault,Tectonic}, title_fa = {طراحی و راه‌اندازی شبکه‌ی لرزه‌نگاری نیروگاه اتمی دارخوین (IR360)}, abstract_fa = {مطالعات ریز لرزه‌خیزی و پایش ریزلرزه‌ها به منظور بررسی هرچه دقیق­تر رفتار گسل‌های موجود و شناسایی گسل‌های پنهان و دیگر ساخت­های زمین­ساختی فعال در مراحل مختلف احداث سازه‌های مهم، به ویژه نیروگاه‌های اتمی اجتناب­ناپذیر است. براساس استانداردهای IAEA و NRC تجهیزات مناسب لازم برای ثبت فوری پاسخ لرزه­ای سازه­های نیروگاه اتمی که از لحاظ ایمنی اهمیت دارند، باید تهیه شوند و براساس دستورالعمل RG. 1.165 پایش لرزه­ای محدوده­ی سایت به وسیله­ی ایستگا­ه­های لرزه­نگاری باید تا حد امکان به محض انتخاب محل سایت انجام گیرد. هم­چنین فعالیت نیروگاه اتمی در مواردی که لرزش زمین از حد زلزله­ی مبنا (OBE) تجاوز می­کند، باید متوقف شود. در این تحقیق، شرح مطالعات و عملیات صحرایی برای جانمایی ایستگاه‌های شبکه­ی لرزه‌نگاری محلی ساخت­گاه نیروگاه اتمی دارخوین ارایه شده است. پس از مطالعات دفتری و بازدید اولیه از محل لرزه­نگارهای قدیمی موجود در منطقه مشخص شد که شبکه­ی مذکور به طور کامل ساختارهای زمین­شناسی اطراف نیروگاه را پوشش نمی­دهد. با بررسی­های صحرایی و روش­های محاسباتی بهینه­سازی، محل­های جدیدی معرفی شد. در تعیین ایستگاه­های جدید مکان­هایی با کم­ترین نوفه و بهترین پوشش برای چشمه­های لرزه­ای منطقه انتخاب شد. مدل­سازی با در نظر گرفتن یک ایستگاه فرضی در محل­های انتخابی، نشان می‌دهد که آستانه­ی ثبت کامل زمین‌لرزه‌ها در نواحی اطراف محل نیروگاه دارخوین زیر مقدار 1 (حدود0.8) می­باشد.}, keywords_fa = {شبکه‌ی لرزه‌نگاری,نوفه,نیروگاه اتمی,گسل,زمین‌ساختی}, url = {https://jonsat.nstri.ir/article_399.html}, eprint = {https://jonsat.nstri.ir/article_399_5b2283a4774a942ba878d5f27366ba0b.pdf} } @article { author = {Danaei, M and Abbasi Davani, F}, title = {Design and Determination of Optimised Dimensions, Efficency and Angular Response of a Long-Countor; and Introducing the Construction Method of a Neutron Counter with a Wide-Range Response}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {32}, number = {4}, pages = {16-23}, year = {2012}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Oneof the most requirement for the neutron flux measurement is to use detectors with the response independent of neutron energy. Also, detectors should be directional and insensitive to the gamma radiation. Long-Counter detectors are considered to be in this catagory. In this paper, this tye of detector has been designed by the MCNPX code. The counter used in this detector is a gas proportional counter which is filled with BF3 of 400 Torr gas pressure. The effective length and diameter of the counter are 31.1cm and 2.4cm, respectively. When the counter is placed in a moderator, its efficiency grows for fast neutron counting. The moderators optimum dimensions (internal and external) and the depth of track in the internal moderator, according to the calculation, are determined to be 8cm, 8cm, and 10cm, respectively. We found a good literature agreement between the calculated response profile up to 20MeV and the curves appeared in the literature, where all are showing the detector response up to 20MeV. In this paper, however, it is calculated up to 100MeV for the first time and in the energy interval of 40MeV to 100MeV with the detector response profile smoother then the other reports. In addition, to avoid entering the scattered neutron from the surroundings a 1mm cadmium absorber is placed between the external and the internal polyethylen moderator. The angular responses for the energies of 2.5MeV, 5MeV and 19MeV and also their effect on the detector efficiency have been investigated. The maximum value of the counter response has been obtained when the neutron source is placed along the detector axis.  }, keywords = {Long Counter Design,Detection Efficiency,Angular Response,Neutron Counter,MCNPX Code}, title_fa = {طراحی آشکارساز طویل و تعیین ابعاد بهینه، بازده و پاسخ زاویه‌ای آن و ارایه‌ی روش ساخت شمارگر نوترون با پاسخ گسترده}, abstract_fa = {اندازه‌گیری شار نوترون مستلزم به کارگیری آشکارسازهایی است که جهت­دار و غیرحساس به پرتو گاما بوده و پاسخ آن­ها مستقل از انرژی نوترون باشد. از جمله­ی این آشکارسازها می‌توان به شمارگر طویل اشاره کرد. این مقاله به طراحی این نوع آشکارساز با استفاده از کد مونت‌کارلوی MCNPX می­پردازد. شمارگر استفاده شده در این طراحی، از نوع تناسبی گازی بود که با گاز 3BF در فشار Torr400 پر شده و دارای طول و قطر فعال به ترتیب برابر با 31.1cm و 2.4cm می‌باشد. با قرار گرفتن این شمارگر در کندساز، بازده آن برای شمارش نوترون‌های تند افزایش می‌یابد. ابعاد بهینه­ی کندساز‌ها (داخلی و خارجی) و عمق شیار ایجاد شده در کندساز داخلی با توجه به محاسبات انجام شده به ترتیب 8 ، 8 و cm10 تعیین شده است. منحنی پاسخ محاسبه شده­ی آشکارساز تا انرژی MeV20 هم­خوانی خوبی با منحنی‌های داده شده در مقالات مربوطه دارد. در تمام مقالات و گزارش­ها پاسخ این آشکارساز تا انرژی MeV20 محاسبه شده است ولی در مقاله­ی حاضر پاسخ این آشکارساز برای اولین بار تا انرژی MeV100 محاسبه شده است. ضمناً در بازه­ی انرژی 40 تا MeV100 پاسخ آشکارساز نسبت به سایر بازه­ها یکنواخت­تر است. علاوه بر این، برای جلوگیری از ورود نوترون‌های پراکنده شده از اطراف، بین پلی‌اتیلن داخلی و خارجی لایه‌ای از کادمیم به ضخامت mm1 قرار داده شده است. پاسخ زاویه‌ای برای سه انرژی2.5، 5 و MeV19 و تأثیر آن بر بازده آشکارساز بررسی شده است. در زاویه­ی 90 درجه که چشمه­ی نوترون کاملاً در راستای محور هندسی آشکارساز قرار دارد، پاسخ آشکارساز بیش­ترین مقدار را دارد.}, keywords_fa = {طراحی آشکارساز طویل,بازده آشکارسازی,پاسخ زاویه‌ای,شمارگر نوترون,کد MCNPX}, url = {https://jonsat.nstri.ir/article_400.html}, eprint = {https://jonsat.nstri.ir/article_400_5e7ef4a31131fe2ec98ac72262243d1c.pdf} } @article { author = {Milani, S.A and Salehi, M.A and Rahgozar, N}, title = {Preconcentration and Determination of Uranium in Water Samples by Cloud Point Extraction Coupled with Alpha Liquid Scintillation Spectrometry}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {32}, number = {4}, pages = {24-34}, year = {2012}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Cloud-point extraction (CPE) was used with lipophilic chelating agent to extract uranium(VI) from aqueous solutions. The applied methodology was based on formation of metal complexes soluble in a micellar phase of a non-ionic surfactant, Triton X-114. The metal ions complexes, then, were extracted into a surfactant-rich phase at a temperature above the cloud-point temperature. The influence of different parameters including the pH of the solution, surfactant concentration, concentration of the chelating agent, incubation time, equilibrium temperature, centrifugation time, initial concentration of U(VI) and interfering ions on the extraction efficiency was studied. A high extraction efficiency was observedand the calibration graphs were found to be linear in the range of 6.25×10-4 to 0.1 μg L-1 of uranium(VI) ion. The detection limit (DL) of the applied method was 0.015μg L-1. The pre-concentration factor was obtained to be 48.5. The interference of the some cations was also tested and in this respect no significant influence was obtained.}, keywords = {Uranium Preconcentration,Cloud-Point Extraction,Uranium Determination,8-Hydroxyquinoline,Triton X-114}, title_fa = {پیش‌تغلیظ و اندازه‌گیری اورانیم در نمونه‌های آبی با استفاده از استخراج نقطه‌ی ابری جفت شده با طیف‌سنجی آلفا بر پایه‌ی سوسوزنی مایع}, abstract_fa = {پیش­تغلیط و اندازه­گیری اورانیم در نمونه­های آبی با استفاده از استخراج نقطه­ی ابری جفت شده با طیف­سنجی آلفا بر پایه­ی سوسوزنی مایع مورد بررسی قرار گرفته ­است. یون­های فلزی با معرف کی­لیت­ساز چربی دوست 8- هیدروکسی کینولین (HQ-8) کمپلکس تشکیل داده و در دمای بالای دمای نقطه­ی ابری سورفکتانت تریتون 114-X به درون فاز غنی از آن استخراج گردید. تفکیک کامل فازها با استفاده از سانتریفوژ به انجام رسید. هم­چنین عوامل مؤثر بر فرایند استخراج نقطه­ی ابری اورانیم شناسایی و سپس میزان تأثیر این عوامل (pH محیط، غلظت لیگاند، غلظت سورفکتانت، دما و زمان تعادل، زمان ماند در سانتریفیوژ، یون­های مزاحم موجود در محیط) مورد ارزیابی قرار گرفته، شرایط بهینه برای پیش­تغلیظ و اندازه­گیری اورانیم در محلول­های آبی با استفاده از استخراج نقطه­ی ابری تعیین گردید. در شرایط بررسی شده، بازده استخراج بالا (99%) و منحنی کالیبراسیون در گستره­ی 6.25×10-4 تا  0.1 μg L-1 خطی بود. ضریب پیش­تغلیظ، 48.5 به دست آمد. این روش، تعیین مقدار اورانیم در نمونه­های آبی را با حد تشخیص 0.015μg L-1 امکان­پذیر ساخت.}, keywords_fa = {پیش‌تغلیظ اورانیم,استخراج نقطه‌ی ابری,اندازه‌گیری اورانیم,عامل کی‌لیت‌ساز HQ-8,سورفکتانت تریتون 114-X}, url = {https://jonsat.nstri.ir/article_401.html}, eprint = {https://jonsat.nstri.ir/article_401_b2eb71fbabad50496baf9556c0a98d84.pdf} } @article { author = {Rashidi, A and Roosta Azad, R and Safdari, S.J}, title = {Particle Size Effects in Bioleaching of Uranium From Saghand Ore by Acidithiobacillus Ferrooxidans (A.f.)}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {32}, number = {4}, pages = {35-42}, year = {2012}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {The effect of mineral particle size on the bioleaching of uranium from Saghand mine (anomaly 1&2) by acidophilic mesophile Acidithiobacillus ferrooxidans was investigated in a shake flask. The findings are indicating that this strain is suitable for the uranium recovery from the mentioned ore. In the range of our studies the uranium recovery is faster in the case of d80=108 micron from anomaly 1, while, a comminution level of d80=160 micron was obtained as an appropriate size for the anomaly 2. The results showed that the particle size distribution of the mineral in this range did not considerably influence the microbial activity. Also, based on the results of bacterial oxidation, the negative effects and toxicity due to the presence of solid and solute components do not put a limit on the microbial activity, and at the tested parameters range, the grown microbial population is performing the desired process excelently.}, keywords = {Bioleaching,Particles Size,Uranium,Acidithiobacillus Ferrooxidans}, title_fa = {تأثیر اندازه‌ی ذرات بر فروشویی زیستی اورانیم از سنگ معدن ساغند به وسیله‌ی باکتری اسیدی‌تیوباسیلوس فرواکسیدان}, abstract_fa = {اثر اندازه­ی ذرات سنگ معدن آنومالی‏های 1 و 2 ساغند بر روی فروشویی زیستی اورانیم به وسیله­ی باکتری اسیددوست اسیدی­تیوباسیلوس فرواکسیدان در مقیاس فلاسک لرزان بررسی شد. نتایج تجربی به دست آمده نشان داد که گونه­ی میکروبی به کار رفته برای استخراج اورانیم از سنگ معدن آنومالی­های 1 و 2 ساغند مناسب می­باشد. در گستره­ی ابعادی بررسی شده، استخراج اورانیم از سنگ معدن آنومالی یک، در حالت µm108=80d سریع­تر می‏باشد، در حالی که برای آنومالی دو، سطح خردایش µm160=80d به عنوان اندازه­ی مناسب به دست آمد. نتایج نشان داد که توزیع اندازه­ی ذرات سنگ معدن در گستره­ی مورد بررسی، تأثیر قابل‏توجهی بر فعالیت میکروبی نمی‏گذارد؛ ضمن این­که براساس نتایج اکسایش باکتریایی، اثرات منفی و سمیّت ناشی از حضور اجزای جامد و حل شده­ی سنگ معدن در گستره­ی مورد بررسی پارامترها، محدودکننده­ی فعالیت باکتری نمی­باشند، و جمعیت میکروبی رشد یافته فرایند مورد نظر را به خوبی به انجام می­رساند.}, keywords_fa = {فروشویی زیستی,اندازه‌ی ذرات,اورانیم,باکتری اسیدی‌تیوباسیلوس فرواکسیدان}, url = {https://jonsat.nstri.ir/article_402.html}, eprint = {https://jonsat.nstri.ir/article_402_b5cc3ce6e98ec88433262dd50ade3343.pdf} } @article { author = {Keyvan, V and Kakuee, O.R and Shokouhi, F}, title = {Anomaly in H2+ Induced X-Ray Emission: An Experimental approach}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {32}, number = {4}, pages = {43-47}, year = {2012}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Interaction of energetic ion beam with matter results in atomic excitation and ionization of matter which consequently leads to occurance of the characteristic X-rays fluorescence. In the interaction of energetic molecular beam with matter, the unique phenomena of “Vicinage effect” and “Coulomb explosion” have already been observed and reported. In this research work, the interaction of molecular ion beam with targets of different atomic numbers was investigated. For this purpose, the yields of characteristic X-rays due to interaction of H2+ molecular ion beam with the selected targets were compared with those due to interaction of H+ atomic beam with the same targets. To accomplish this, atomic and molecular beams in the energy range of 1 to 1.4 MeV/u were used to irradiate targets of different atomic numbers, including Cu, Mn and Al. For Mn and Cu. The measured yields of the characteristic X-rays due to the irradiation by the atomic and molecular beams were found to be approximately the same. However, for the Al target, a significant difference was observed for the X-ray characteristic yields due to the irradiation by the atomic and molecular beams.}, keywords = {Characteristic X-Ray Fluorescence,Vicinage Effect,Coulomb Explosion,H2+ Molecular Beam}, title_fa = {گسیل غیرمتعارف پرتو ایکس از پرتابه‌ی +2H: یک تجربه‌ی آزمایشگاهی}, abstract_fa = {در اثر برهم‌کنش باریکه­ی پرانرژی با ماده، فرایند برانگیزش و یونش اتم‌ها و به دنبال آن فلوئورسانی پرتو ایکس مشخصه ایجاد می‌شود. در برهم‌کنش باریکه­ی مولکولی پرانرژی با ماده، پدیده‌های منحصر به فرد اثر همسایگی و انفجار کولنی مشاهده شده است. در این مقاله، برای مطالعه­ی برهم‌کنش باریکه­ی مولکولی با ماده، بهره­ی پرتو ایکس مشخصه­ی برهم‌کنش ناشی از باریکه­ی مولکولی 2H+ با باریکه­ی اتمی +H مقایسه شده است. باریکه­های اتمی و مولکولی، به ترتیب، +H و +2H با انرژی‌های 1 تا 1.4 MeV/u با هدف‌های Cu، Mn و Al با اعداد اتمی متفاوت مورد استفاده قرار گرفته است. در مورد هدف‌های Cu و Mn بهره­ی پرتوهای ایکس مشخصه­ی اندازه‌گیری شده برای باریکه‌های فرودی اتمی و مولکولی تفاوت قابل­ملاحظه‌ای را نشان نمی‌دهند. اما برای هدف Al، در بهره­ی پرتو ایکس مشخصه­ی ناشی از باریکه‌های اتمی و مولکولی اختلاف معنی‌داری اندازه‌گیری شده است.}, keywords_fa = {فلوئورسانی پرتو ایکس مشخصه,اثر همسایگی,انفجار کولنی,باریکه‌ی هیدروژن مولکولی}, url = {https://jonsat.nstri.ir/article_403.html}, eprint = {https://jonsat.nstri.ir/article_403_92c07561751c7c2db93ca6f81e71417f.pdf} } @article { author = {A.Mostafavi, H and Mirmajlessi, S.M and Mirjalili, S.M and Fathollahi, H and Mansouripour, S.M and Babaei, M}, title = {Effect of Gamma Radiation on Spore Germination and Mycelial Growth of Penicillium Expansum, Postharvest Disease of Apple Fruit}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {32}, number = {4}, pages = {49-54}, year = {2012}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Blue mold caused by Penicillium expansum causes most of the losses during the storage period in the world. In this study, the inhibition effect of different doses of gamma radiation on spore germination and mycelial growth of Penicillium expansum was investigated. As a result, the Penicillium expansum was recovered from infected apple fruits. In order to evaluate the gamma radiation effect on the spore germination, spore suspension (104 spore/ml) exposed to 0, 100, 300 and 600 grey, using Co-60 gamma cell with a dose rate of 0.2 Gy/Sec. Also, a disk of mycelium (0.5 cm2) was removed from the edge of a three-days colony and transferred to PDA plates and irradiated to 0, 1500, 2000, 2500, 3000 and 3500 Gy. The results showed that, the irradiation has completely inhibited the spore germination at 600Gy. While, a dose of 3000Gy completely inhibited the mycelial growth of Penicillium expansum.  }, keywords = {Gamma radiation,Postharvest Diseases,Spore Germination,Penicillium Expansum,Radiation Doses,Apples}, title_fa = {تأثیر پرتو گاما بر جوانه‌زنی هاگ و رشد ریسه‌ای پنی‌سیلیم اکپانسیم عامل بیماری پس از برداشت میوه‌ی سیب}, abstract_fa = {بیماری کپک آبی با عامل پنی­سیلیم اکپانسیم به عنوان خسارت­زاترین عامل بیماری در طول دوره­ی انبارمانی مطرح می­باشد. در این تحقیق، اثر بازدارندگی دزهای مختلف پرتو گاما بر جوانه­زنی هاگ و ریسه­ای پنی­سیلیم اکپانسیم، عامل بیماری پس از برداشت میوه­ی سیب مورد بررسی قرار گرفت. برای این منظور پنی­سیلیم اکپانسیم از میوه­های سیب آلوده با علایم لهیدگی جداسازی شد. برای بررسی تاثیر پرتو گاما بر جوانه­زنی، سوسپانسیون هاگ قارچ (با غلظت 104 هاگ برمیلی­لیتر) در معرض دزهای 0، 100، 300 و 600 گری پرتو گامای دستگاه گاماسل با چشمه­ی کبالت-60 و با نرخ دز 0.2  گری در ثانیه قرار گرفت. هم­چنین برای بررسی اثر پرتو گاما بر رشد ریسه­ای، یک قطعه­ی  0.5 سانتی­متری از کلنی سه روزه­ی قارچ به محیط کشت سیب­زمینی- دکستروز- آگار انتقال یافته و با دزهای 0، 1500، 2000، 2500،3000 و 3500 گری پرتودهی گردید. نتایج حاصل نشان داد که پرتودهی با دز حدود 600 گری، به طور کامل مانع جوانه­زنی هاگ قارچ می­شود، و دزهای بالاتر از 3000 گری توانست به طور کامل مانع رشد ریسه­ای پنی­سیلیم اکپانسیم شود.}, keywords_fa = {پرتو گاما,بیماری‌های پس از برداشت,جوانه‌زنی هاگ,پنی‌سیلیم اکپانسیم,دزهای تابش,سیب‌ها}, url = {https://jonsat.nstri.ir/article_404.html}, eprint = {https://jonsat.nstri.ir/article_404_303927d10213edc19b1d251ccf2b3390.pdf} } @article { author = {Sadighzadeh, A and Shahidi, A and Asgharizadeh, F and Salimi, B}, title = {Radioactive Contamination Control Method in Neutron Source Damage Event in Tehran Research Reactor}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {32}, number = {4}, pages = {55-59}, year = {2012}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {The event of the initiator neutron source damage in the Tehran Research Reactor (TRR) caused to release a significant amount of radioactive materials in the primary cooling system of the TRR. The event caused the impuritie level to exceed beyound the allowed limit and to an extent that the present water purification system was not able to function effectively. Hence, elimination of radioactive pollutions was found to be a necessary task for the safe operation of the reactor. It was realized, initially that the contamination is due to very small particles size. Thus, the method of water treatment for the small-size particle elimination was found to be essential. For this purpose, the efficiency of fiber filters was studied for selecting the most efficient sample. In spite of implementation of a high particle removal efficiency, however, the effectiveness of the fiber filters in this process was found to be low, and consequently, it was concluded that contamination particles are ranged in a very small-size and in the dimensions of molecular size. Based on this investigation, the method of purification of molecular size impurities were examined. Our examinations showed that utilizing a carbon active filter is the best approach for purifiying the reactor primary cooling system. The laboratory results have also shown that the efficiency of carbon active filter of 40cm deeps is about 76% for removing the alpha emitter particles. By considering these results, we set up a filtration system for water purification with granular charcoal of 100cm deeps. After the successful purification of the polluted primary cooling system, the reactor was able to operate safely.}, keywords = {Decontamination,Tehran Research Reactor,Neutron Source Damage Event,Radioactive Contaminents}, title_fa = {روش کنترل آلاینده‌های پرتوزا در رویداد آسیب‌دیدگی چشمه‌ی نوترونی رآکتور تحقیقاتی تهران}, abstract_fa = {رویداد آسیب­دیدگی چشمه­ی نوترونی رآکتور تحقیقاتی تهران موجب رهاسازی مقادیر زیادی مواد پرتوزا از جمله پلوتونیم در آب مدار اولیه­ی رآکتور شد. این رویداد باعث شد مقدار فعالیت پرتوزایی و ناخالصی­ها در آب مدار اولیه از حد مجاز بالاتر رود به طوری که سیستم­های تصفیه­ی موجود در رآکتور دیگر قادر به رفع آلودگی نبودند. در نتیجه، راه‌اندازی مجدد رآکتور در شرایط ایمن، مستلزم حذف آلاینده‌های پرتوزا از آب مدار اولیه­ی رآکتور بود. آلودگی آب مدار اولیه از نوع ذره­ای تشخیص داده شد. از این­رو، روش­های تصفیه­ی ذره­ای برای رفع آلودگی آن مدنظر قرار گرفتند. در این راستا، کارآیی ربایش ذره­ای نمونه­های بسترهای الیافی برای انتخاب بهترین نمونه برای جداسازی مورد بررسی قرار گرفت. در این بررسی، از بسترهای با کارآیی جداسازی بالا استفاده شد. با این حال کارآیی آن­ها برای جداسازی آلاینده­های پرتوزا از نمونه­های آب مدار اولیه ناچیز بود. به این ترتیب، نتیجه­گیری شد که ذرات حل شده در آب رآکتور در مقیاس مولکولی و ذرات بسیار ریزی بوده­اند. لذا روش­های تصفیه­ی مولکولی مدنظر قرار گرفته و بررسی­های انتخاب روش بهینه به این سمت سوق داده شدند. کارآیی جداسازی چندین روش­ تصفیه در مقیاس مولکولی مورد بررسی آزمایشگاهی قرار گرفت. نتایج به دست آمده از بررسی­ها نشان داد که بهترین روش حذف آلاینده­های پرتوزا در آب مدار اولیه­ی رآکتور، استفاده از یک بستر کربن فعال است. نتایج بررسی­های آزمایشگاهی کارآیی حذف آلاینده­های آلفازا با یکی از بسترهای کربن فعال به ارتفاع عملیاتی cm40 را حدود %76 به دست داد. با استفاده از این کربن فعال دانه­ای یک سیستم تصفیه به ارتفاع cm100 طراحی گردید. و با استفاده از آن خالص­سازی آب آلوده­ی مدار اولیه با موفقیت به انجام رسید.}, keywords_fa = {آلودگی‌زدایی,رآکتور تحقیقاتی تهران,رویداد آسیب‌دیدگی چشمه‌ی نوترون,آلاینده‌های پرتوزا}, url = {https://jonsat.nstri.ir/article_405.html}, eprint = {https://jonsat.nstri.ir/article_405_f7f259c2f73890e451953b0f97ab9363.pdf} }