@article { author = {Shirani, B and Abbasi Davani, F}, title = {Experimental Study of Neutron Emission Characteristics in SBUPF1 Plasma Focus Device}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {31}, number = {1}, pages = {1-8}, year = {2010}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {In this work, neutron production of SBUPF1 (a 2.5 kJ Mather type plasma focus device) at various pressures of deuterium and two different anode lengths (12 cm, 18 cm) were studied. Three silver activation counters were used at three different angels (0º, 45º and 90º) in order to determine the angular distribution of neutrons. The neutron and hard x-ray pulses were registered by a ø5"×5" plastic scintillator. These pulses were further used to determine the average energy of the detected neutrons. Experiments showed that for the 18cm anode at the optimum gas pressure, the neutron generation has decreased while the neutron yield at this pressure has increased. Under these conditions, the optimum pressure is 6 mbar, the neutron yield at the optimum pressure is about 6.4×107 per pulse, and the average energy of neutrons is 2.24 MeV.}, keywords = {Plasma Focus,Fusion,Neutron,Optimum Pressure,Activation Counter}, title_fa = {بررسی تجربی مشخصه‌های گسیل نوترون در دستگاه پلاسمای کانونی SBUPF1}, abstract_fa = {در این تحقیق، نوترون‌دهی پلاسمای کانونی نوع مَدِر SBUPF1 با مشخصات (2.5 kJ =E و Fμ6/8=C) در فشارهای مختلف گاز دوتریم و برای دو آند با اندازه‌های مختلف 12 و 18 سانتی‌متر مورد بررسی قرار گرفته است. از سه شمارگر فعال‌سازی نقره که یکی از آن‌ها بالای سر آند و دوتای دیگر در زوایای 45 و 90 درجه نسبت به محور آند قرار داده می‌شدند، برای شمارش نوترون و تعیین تقریبی توزیع زاویه‌ای گسیل نوترون استفاده شده است. هم‌چنین یک آشکارساز سوسوزن پلاستیکی ("5×"5ø) برای ثبت تپ نوترون و پرتو ایکس سخت و تعیین انرژی میانگین نوترون‌ها به کار گرفته شد. نتایج آزمایش‌های انجام شده نشان دادند که برای آند با طول بزرگ‌تر، فشار بهینه‌ی گاز برای تولید نوترون کم‌تر شده و بهره‌ی نوترون در این فشار بهینه افزایش می‌یابد. در این شرایط، فشار بهینه‌ی گاز دوتریم برای تولید نوترون، mbar6، بهره‌ی نوترون در این فشار بهینه به طور متوسط حدود  107 × 6.4 نوترون در هر تپ و انرژی میانگین نوترون‌ها  2.24Me V است.}, keywords_fa = {پلاسمای کانونی,هم‌جوشی,نوترون,فشار بهینه,شمارگر فعال‌سازی}, url = {https://jonsat.nstri.ir/article_458.html}, eprint = {https://jonsat.nstri.ir/article_458_793b53fbed8e6f300b4cd11750827cb2.pdf} } @article { author = {Jalilian, A.R and Zandi, H and Akhlaghi, M and Kamali Dehghan, M and Bolourinovin, F and Moradkhani, S and Majdabadi, A}, title = {Preparation of [61Cu]Bleomycin Complex as a Potenlial PET Radiopharmaceutical and it’s Biological Evaluation in Normal and Tumor-Bearing Rodents}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {31}, number = {1}, pages = {9-17}, year = {2010}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {[61Cu]Bleomycin ([61Cu]BLM) was prepared using [61Cu]CuCl2 produced via natZn(p,x)61Cu (180μA proton irradiation, 22MeV, 3.2h), purified by ion chromatography method. [61Cu]BLM was prepared at optimized conditions (room temperature, 45 min, 0.1 mg bleomycin for 2-10mCi 61CuCl2) with radiochemical purity over 98% determined by HPLC and RTLC. [61Cu]BLM was administered into the normal and tumor bearing rodents up to 210 minutes followed by biodistribution and co incidence imaging studies. A significant tumor/non tumor accumulation was observed either by animal sacrification or imaging method. [61Cu]BLM can be a potential PET radiotracer for tumor imaging.}, keywords = {Radiopharmaceutical,Copper-61,Bleomycin,Positron Emission Tomography,Radiolabeling,Quality Control}, title_fa = {تولید کمپلکس Cu61- بلئومایسین به عنوان یک رادیوداروی احتمالی توموگرافی گسیل پوزیترون (PET) و بررسی زیستی آن در موش‌های سالم و توموری}, abstract_fa = {تولید رادیونوکلید مس-61 در سیکلوترون از طریق بمباران روی طبیعی با باریکه‌ای از پروتون‌های به انرژی MeV22 و جریان Aµ150 و به مدت 90 دقیقه انجام شد. در پایان پرتودهی مقدار فعالیت به دست آمده برابر GBq222، معادل Ci6 (mCi5 ± Ci6) و بازده محصول برابر MBq/µAh440 بود. رادیوداروی Cu61- بلئومایسین (Cu-BLM61) در شرایط بهینه (دمای اتاق، زمان پرتودهی 45 دقیقه، 0.1 mg  بلئومایسین به ازای 2 تا 10 میلی‌کوری کلرید مس-61) تهیه شد. جداسازی، به روش کروماتوگرافی یونی صورت گرفت و بازده جداسازی رادیوشیمیایی به روش کروماتوگرافی لایه‌ی نازک پرتوزا (RTLC) و کروماتو گرافی مایع با کارآیی بالا (HPLC) بیش‌تر از 98% به دست آمد. رادیوداروی BLM Cu]61[ به موش‌های سالم و دارای تومور بافت هم‌بند تزریق و پراکنش بافتی آن در فاصله‌ی زمانی 210 دقیقه با بهره‌گیری از اندازه‌گیری‌های همفرودی زمانی دوربین گاما مورد مطالعه قرار گرفت. تجمع قابل قبول رادیودارو در تومور نسبت به سایر اعضاء توسط تصاویر PET و مطالعات پراکنش بافتی مشاهده گردید. رادیوداروی BLM Cu]61[ می‌تواند برای مشخص نمودن تومور در تصاویر PET مورد استفاده قرار گیرد.}, keywords_fa = {رادیودارو,مس-61,بلئومایسین,توموگرافی گسیل پوزیترون,نشان‌دارسازی پرتوی,کنترل کیفی}, url = {https://jonsat.nstri.ir/article_459.html}, eprint = {https://jonsat.nstri.ir/article_459_f0791a01da88950614e9fe25a6a852f3.pdf} } @article { author = {Jazayeri, S.H and Hayati Ashtiani, M and Ashrafizadeh, S.N and Ghannadi Maragheh, M and Nozad Golikand, A}, title = {Heavy Metal Removal from Synthetics Wastes by Natural and Acid-Activated Bentonites}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {31}, number = {1}, pages = {18-27}, year = {2010}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {This paper examines heavy metals removal from synthetics wastes by the use of natural and sulfuric acid-activated bentonite so that a cheap adsorbent can be attained for removing these metals from the wastes. Bentonite is a 2:1 layer aluminnisilicate whose dominant mineral is montmorillonite which is a nano-structure and nanoporous material. Montmorillonite affects all the properties of bentonite. In the next step, the effect of acid activation on the adsorption of both of lead (Pb) and thallium (Tl) is studied. In this research, after the mineralogical and chemical composition analyses by X-ray diffraction and fluorescence (XRD and XRF) methods, granulometric analysis is carried out on five samples namely, S2-RAW, S3-RAW, ES3-RAW, G1-RAW and GH1-RAW to remove the heavy metals such as Cr, Co, Cu, Fe, Pb, Tl, Ni, and Zn accompanying atomic absorption spectroscopy (AAS). Then, the effect of four factors including concentration, liquid to solid ratio (L/S), time, and activation temperature in acid activation process were studied. This process is done by a mineral acid, sulfuric acid, to promote the adsorbability of lead and thallium in both natural and activated types of ES3-RAW and GH1-RAW. In all case, due to the presence of dominant mineral of nano-montmorillonite and its unique structure, montmorillonite has a higher adsorbability in comparison with that of the other clay minerals.}, keywords = {Bentonite,Adsorption,Acid-Activation,Heavy Metals,Nanostructured and Nanoporous Montmorillonite}, title_fa = {حذف فلزات سنگین از پسماندهای سنتزی توسط بنتونیت طبیعی و بنتونیت فعال شده با اسید}, abstract_fa = {در این پژوهش به بررسی امکان استفاده از بنتونیت (مونتموریلونیت) طبیعی و فعال شده با اسید به عنوان جاذبی ارزان و در دسترس برای حذف فلزات سنگین از پسماندهای مایع سنتزی پرداخته شده است. بنتونیت یکی از کانی‌های رسی آلومینوسیلیکاتی لایه‌ای است که مهم‌ترین فاز سازنده‌ی آن مونتموریلونیت می‌باشد که دارای حفرات و ساختاری در ابعاد نانو است (نانو ساختار و حفره‌ای مونتموریلونیت). مونتموریلونیت کلیه‌ی خواص بنتونیت را تحت تأثیر قرار می‌دهد. در مرحله‌ی بعدی اثر فعال‌سازی اسیدی در جذب دو فلز سرب (Pb) و تالیم (Tl) مورد بررسی قرار گرفت. در این تحقیق، پس از کانی‌شناسی، تجزیه‌ی عنصری و دانه‌بندی، جذب فلزات سنگین چون Cr، Co، Cu، Fe، Pb، Tl، Ni و Zn بر روی پنج نمونه -RAW2S، -RAW3S، -RAW3ES، -RAW1G، -RAW1GH بررسی شد. سپس در فرایند فعال‌سازی اسیدی، از سولفوریک اسید برای تقویت قابلیت جذب بنتونیت استفاده شد و اثر غلظت، نسبت مایع به جامد، زمان و دمای فعال‌سازی بر میزان جذب دو فلز سنگین سرب و تالیم بر روی دو نمونه‌ی طبیعی و فعال شده‌ی –RAW3ES و -RAW1GH مورد بررسی قرار گرفت. در تمامی موارد فاز غالب نانومونتموریلونیت موجود در بنتونیت‌ها به علت ساختار ویژه‌ی نانومونتموریلونیتی، از قابلیت جذب بیش‌تری نسبت به سایر رس‌‌ها برخوردار بوده است.}, keywords_fa = {بنتونیت,جذب سطحی,فعال‌سازی اسیدی,فلزات سنگین,نانو ساختار و نانوحفره‌ای مونتموریلونیت}, url = {https://jonsat.nstri.ir/article_460.html}, eprint = {https://jonsat.nstri.ir/article_460_c739dfdf3965a4d9eb695d4d6e1067fb.pdf} } @article { author = {Hamnabard, Z and Kakooei, s and Rahimi, R}, title = {The Effect of Homogenization Procedure on Properties and Microstructure of High Content Lead Glasses}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {31}, number = {1}, pages = {28-33}, year = {2010}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Radiation shielding lead glasses can be used in any facility, which requires protection from radiation, for example medical centers, industrial and nuclear sites. Usually, for improvement of optical properties and homogeneity control of these glasses, homogenization process in different ways is applied. One of the important methods, which is also industrially practical for other glass systems, named fritting, is the process of melting and quenching of molten materials to form small glass particles. In the current work, the effect of homogenization on the thermal and physical properties of lead glasses is investigated. In this way, a composition of lead glass was selected. Then fritting procedure applied six times for this composition and the effect of fritting on thermal, physical, properties and homogeneity of glass were discussed. Finally, microstructural analyses of glass specimens were carried out. The results showed that the increase of the fritting period has an unwanted influence on different properties of the glass samples and this process can be used in joint with considering the other effective parameters.}, keywords = {Lead Glass,Homogenization Method,Heat treatment,Physical Properties,Microstructure}, title_fa = {بررسی اثر همگن‌سازی بر خواص و ریزساختار شیشه‌های سربی مورد استفاده در صنایع هسته‌ای}, abstract_fa = {در مراکز پزشکی، هسته‌ای و صنعتی برای جلوگیری از تأثیرات منفی پرتوها از شیشه‌های سربی استفاده می‌گردد. از آن‌جایی که ویژگی اپتیکی این شیشه‌ها از اهمیت بالایی برخوردار است، برای جلوگیری از ناهمگن شدن مذاب شیشه و ته‌نشینی آن، مذاب به روش‌های مختلف همگن می‌گردد. یکی از این روش‌ها که برای سایر شیشه‌ها نیزکاربرد دارد، تکرار عملیات ذوب و فریت‌سازی است. بدین منظور شیشه به دفعات مختلف و پی‌درپی تحت عملیات ذوب و تخلیه‌ی مذاب قرار می‌گیرد. در کار حاضر ابتدا ترکیب شیشه‌ی سربی پایه انتخاب و سپس چندین مرحله عملیات فریت‌سازی مذاب شیشه انجام و تأثیر آن بر خصوصیات فیزیکی، حرارتی، همگن بودن و مقاومت اسیدی بررسی گردید. در نهایت ریزساختار نمونه‌های حاصله مورد ارزیابی قرار گرفت. نتایج نشان داد که افزایش دفعات ذوب شیشه تأثیر منفی بر خواص آن داشته و استفاده از این روش به منظور رسیدن به نتایج مطلوب باید همراه با در نظر گرفتن سایر عوامل مؤثر در این ارتباط باشد.}, keywords_fa = {شیشه‌ی سربی,روش همگن‌سازی,عملیات حرارتی,خصوصیات فیزیکی,ریزساختار}, url = {https://jonsat.nstri.ir/article_461.html}, eprint = {https://jonsat.nstri.ir/article_461_46220b11ced26eb533bd24b5f6afbddd.pdf} } @article { author = {Ghanbari, Y and Saen, S and memar, A}, title = {Potential Map Ping and Regional Geochemical Exploration of Uranium by Using Tracers in Esfordi 1:100,000 Sheet}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {31}, number = {1}, pages = {34-41}, year = {2010}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {According to Atomic Energy Organization of Iran (AEOI) Uranium exploration program in Central Iran, Esfordi 1:100,000 sheet which is located in Yazd province, between Bafq & Behabad cities was prospected. The analysis result of the stream sediment samples which were collected by the Geography Society of Iran (GSI) have been used for radioactive resources of this area. Due to lacking of uranium, thorium and Rare Earth Elements (REE) analysis data, the uranium tracers have been used. The data processing, i.e. normalization, univariate and multivariate analysis were studied and ultimately, anomalies maps were prepared. Three uranium potential areas were introduced. These areas include marl and conglomerate sequence in North-west of region, south of Zarigan granite and sandstone sequence with aplites between Esfordi mine and Kooshk mine. Thus, Esfordi sheet is important as a sediment hosted uranium deposit.}, keywords = {Radioactive Elements,Stream Sediment,Tracer Elements,Esfordi}, title_fa = {پتانسیل‌یابی و اکتشافات ژئوشیمیایی ناحیه‌ای اورانیم با استفاده از عناصر ردیاب در برگه‌ی 000‚1:100 اسفوردی}, abstract_fa = {در راستای اجرای طرح سراسری اکتشاف ذخایر اورانیم در ایران مرکزی توسط سازمان انرژی اتمی ایران، برگه‌ی 000‚1:100 اسفوردی واقع در استان یزد و در حد فاصل شهرهای بافق و بهاباد مورد پی­جویی و اکتشاف مقدماتی قرار گرفت. به منظور پتانسیل­یابی عناصر پرتوزا در این برگه، از نتایج تجزیه‌ی نمونه­های رسوب آبراهه­ای برداشت شده توسط سازمان زمین­شناسی کشور استفاده شد. چون عناصر اورانیم و توریم و هم‌چنین عناصر خاکی نادر مورد تجزیه قرار نگرفته بودند، از ردیاب­های اورانیم برای بررسی استفاده شد. فرایند پردازش داده­ها شامل بهنجارسازی داده­ها، بررسی­های تک­متغیره و چندمتغیره و در نهایت ترسیم و تفسیر نقشه‌ی آنومالی عناصر است. با توجه به نتایج به دست آمده از بررسی­های ژئوشیمی، سه محدوده به عنوان مناطق پتانسیل­دار برای ذخایر اورانیم معرفی شد. این سه محدوده توالی­های مارن و کانگلومرا در شمال‌غرب ناحیه، جنوب توده‌ی گرانیتی زریگان و توالی­های ماسه­سنگی همراه با توده­های کوچک نفوذی در محدوده‌ی اطراف معدن اسفوردی و حد فاصل آن تا حوالی معدن کوشک است. با توجه به نتایج حاصله، می­توان گفت که برگه‌ی اسفوردی به لحاظ ذخایر اورانیم رسوبی اهمیت زیادی دارد.}, keywords_fa = {عناصر پرتوزا,رسوب آبراهه‌ای,عناصر کم‌مقدار,اسفوردی}, url = {https://jonsat.nstri.ir/article_462.html}, eprint = {https://jonsat.nstri.ir/article_462_f4800af56104216b5d1547ea11284774.pdf} } @article { author = {Nilchi, A and Rafiee, R and Babalou, A.A and Rasouli Garmarodi, S}, title = {Adsorption Properties of Amidoxime Resins for Separation of Uranium (VI) from Aqueous Solutions}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {31}, number = {1}, pages = {42-47}, year = {2010}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {In this study, the acrylonitrile (AN)-divinylbenzene (DVB)-methylacrylate (MA) resin was synthesized via suspension polymerization in the presence of toluene as a diluent, and benzoylperoxide (BPO) as an initiator. The effect of MA, toluene and alkaline treatment on the exchange capacity of the resin were investigated. The results showed that the anion exchange capacity decreases with an increase of the amount of MA, while alkaline treatment has no significant effect. Also, the cation exchange capacity increases with an increase in the amount of hydrophilic agent and reaches a maximum. The sorption equilibrium was achieved relatively fast within 40 minutes. The adsorption of uranium was directly depends on the pH value. Finally, the alkaline treatment enhances the potential for the much faster adsorption and the chelating resin provides a more favourable pore structure for the rapid diffusion of the ions.}, keywords = {Amidoxime Resin,Adsorption,Ion Exchange Capacity,Hydrophilic Agent,Alkaline Treatment}, title_fa = {خواص جذبی رزین‌های آمیداکسیم برای جداسازی یون‌های اورانیم (VI) از محلول‌های آبی}, abstract_fa = {در این تحقیق، رزین اکریلونیتریل (AN)- دی‌وینیل بنزن (DVB)- متیل اکریلات (MA) به روش پلی‌مریزاسیون تعلیقی و در حضور عامل رقیق‌کننده‌ی تولوئن و آغازگر بنزوئیل پراکساید (BPO) سنتز شد. اثر میزان متیل‌اکریلات، تولوئن و اصلاح قلیایی بر روی ظرفیت تبادل یونی رزین بررسی گردید. نتایج نشان داد که ظرفیت تبادل آنیونی با افزایش مقدار متیل‌اکریلات کاهش می‌یابد در حالی‌که اصلاح قلیایی تأثیر چندانی بر آن ندارد. هم‌چنین با افزایش میزان عامل آب‌دوست، ظرفیت تبادل کاتیونی افزایش می‌یابد و به مقدار بیشینه می‌رسد. تعادل جذب نسبتاً سریع و در مدت زمان 40 دقیقه حاصل می‌شود. میزان جذب اورانیم به pH محلول بستگی دارد. در نهایت اصلاح قلیایی سبب جذب سریع‌تر یون‌های اورانیم (VI) شده و رزین‌های کی‌لیت‌کننده، ساختارهای متخلخل مناسبی برای نفوذ سریع‌تر یون‌های اورانیم فراهم می‌کنند.}, keywords_fa = {رزین آمیداکسیم,جذب,ظرفیت تبادل یونی,عامل آب‌دوست,اصلاح قلیایی}, url = {https://jonsat.nstri.ir/article_463.html}, eprint = {https://jonsat.nstri.ir/article_463_a628f6577695274c71a12776ab353479.pdf} } @article { author = {Ahari Mostafavi, H and Safie, N and Fathollahi, H and Babaie, M and Dorri, H.R and Lak, M.R}, title = {Pathological and Molecular Identification of Fusarium Solani F.Sp. Phaseoli Isolates and Determination of Suitable Gamma ray Dose Rate for Mutation Induction}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {31}, number = {1}, pages = {48-51}, year = {2010}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {During 1384-1385, the plants showing root and crown rot were collected from 48 bean fields in the Khuzestan and Markazi provinces. Twenty isolates were identified as Fusarium solani based on morphological characteristics. The pathogenicity tests confirmed four isolates as Fusarium solani f.sp. phaseoli. By using specific primers for this specific form, three isolates showed concordant results with pathogenicity tests. As a result three isolates morphologically and molecularly identified as F.solani f.sp. phaseoli. In order to induce mutation, conidia scraped from F.solani f.sp. phaseoli cultures, were counted, diluted and then plated on water agar. The plates containing conidia were irradiated in a 60Co-gamma cell (with activity of 2500 curi and 0.38 gray per second dose rates) in doses 0, 60, 90, 120, 150, 180 Gy. After 18 hours, the percentage germination of spores were scored. The comparison of percentage germination and vegetative growth in different dose rates showed that spore mutagenesis can be expected in 120-180 Gy.}, keywords = {Gamma Ray,Mutation Induction,Fusarium Solani F.Sp.Phaseoli,Specific Primer}, title_fa = {شناسایی پاتولوژیکی و مولکولی جدایه‌های فوزاریم سولانی اختصاصی لوبیا و تعیین آهنگ دز پرتو گاما مناسب برای القای جهش در آن}, abstract_fa = {در سال‌های 1384-1385 گیاهان با علایم پوسیدگی ریشه و طوقه از 48 مزرعه‌ی مختلف لوبیا واقع در استان‌های خوزستان و مرکزی جمع‌آوری شد. پس از شناسایی ریخت‌شناختی، تعداد 20 جدایه‌ی فوزاریم سولانی تعیین شد. با انجام آزمایش‌های بیماری‌زایی، فرم مخصوص چهار جدایه‌ی فوزاریم سولانی اختصاصی لوبیا مشخص گردید. با به کارگیری آغازگرهای اختصاصی برای این فرم مخصوص (FSPHR وFSPHF )، تعداد سه جدایه به عنوان فرم مخصوص لوبیا مورد تأیید قرار گرفت. به منظور القای جهش، هاگ تولید شده در محیط کشت قارچ پس از شمارش و تعیین رقت، بر سطح محیط کشت آب- آگار پخش شد. محیط‌های کشت حاوی هاگ با استفاده از دستگاه گاماسل با چشمه‌ی کبالت 60 (فعالیت 2500 کوری و آهنگ دز 0.38 گری در ثانیه) در دزهای 0، 60، 90، 120، 150 و 180 گری پرتودهی شد. پس از گذشت 18 ساعت، درصد جوانه‌زنی هاگ‌ها محاسبه گردید. مقایسه‌ی درصد جوانه‌زنی و میزان رشد کولونی در دزهای مختلف نشان داد که در محدوده‌ی 120 تا 180 گری می‌توان انتظار وقوع جهش مفید در ژنوم هاگ‌های قارچ را داشت.}, keywords_fa = {پرتو گاما,القای موتاسیون,فوزاریم سولانی اختصاصی لوبیا,آغازگرهای اختصاصی}, url = {https://jonsat.nstri.ir/article_464.html}, eprint = {https://jonsat.nstri.ir/article_464_4f6895d9fd5fd49404e756c68f33e22d.pdf} } @article { author = {Bagherifam, S and Lakziyan, A and Ahmadi, S.J and Fotovvat, A and Rahimi, M.F}, title = {The Effects of Different Uranium Concentrations on Soil Microbial Populations and Enzymatic Activities}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {31}, number = {1}, pages = {52-57}, year = {2010}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Uranium is an ubiquitous constituent of natural environment with an average concentration of 4mg/kg in earth crust. However, in local areas it may exceed the normal concentration due to human activities resulting in radionuclide contamination in groundwater and surface soil. The effect of six levels of uranium concentration (0, 50, 100, 250, 500 and 1000mg kg-1) on soil phosphatase activities and microbial populations were studied in a completely randomized design as a factorial experiment with three replications. The results showed a significant decrease in phosphatase activity. The result of the experiment suggests that soil microbial populations (bacteria, funji and actinomysetes) decrease by increasing the uranium levels in the soil. Therefore, assessment of soil enzymatic activities and microbial populations can be helpful as a useful index for a better management of uranium and radioactive contaminated soils.}, keywords = {Uranium,Soil Microbial Populations,Enzime Phosphatase Activity}, title_fa = {تأثیر غلظت‌های مختلف اورانیم (U238) بر جمعیت‌های میکروبی و فعالیت آنزیمی خاک}, abstract_fa = {اورانیم یکی از مؤلفه‌های همه‌جا حاضر محیط زیست با غلظت متوسط 4 میلی‌گرم بر کیلوگرم می‌باشد. معمولاً غلظت آن به علت فعالیت‌های انسانی در بعضی مناطق زمین به بالاتر از حد مجاز رسیده و این امر سبب آلودگی خاک‌ها و آب‌های زیرزمینی گردیده است. به منظور بررسی تأثیر مقدار اورانیم بر فعالیت آنزیم فسفاتاز و جمعیت‌های میکروبی خاک، مطالعه‌ای در قالب طرح کاملاً کاتوره‌ای به صورت فاکتوریل با شش غلظت مختلف اورانیم (0، 50، 100، 250، 500 و 1000 میلی‌گرم اورانیم بر کیلوگرم خاک) با سه تکرار در شرایط ثابت انکوباسیون انجام شد. نتایج حاصل نشان داد که غلظت‌های مختلف اورانیم باعث کاهش معنی‌دار فعالیت آنزیم فسفاتاز در طول زمان آزمایش شد. هم‌چنین با افزایش مقدار اورانیم در خاک، جمعیت باکتری‌ها، قارچ‌ها و اکتینومیسیت‌ها به طور معنی‌داری کاهش یافت. بنابراین مطالعه‌ی تغییرات جمعیت موجودات میکروبی و فعالیت‌های آنزیمی می‌تواند به عنوان شاخص‌های سودمند در مدیریت خاک‌های آلوده به اورانیم و سایر مواد پرتوزا حایز اهمیت باشد.}, keywords_fa = {اورانیم,جمعیت میکروبی خاک,فعالیت آنزیم فسفاتاز}, url = {https://jonsat.nstri.ir/article_465.html}, eprint = {https://jonsat.nstri.ir/article_465_02716fb7d056ba1f95c00ccad7b15dc4.pdf} } @article { author = {Sheibani, Sh and Pourbeigi, H and Tavakoli, Y.H and Keyvani, M}, title = {Production and Evaluation of 186Re Radionuclide in the Tehran Research Reactor for Therapeutic Applications}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {31}, number = {1}, pages = {58-62}, year = {2010}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {In this work, the production of 186Re by 185Re (n,γ) 186Re reaction in the Tehran Research Reactor (T.R.R) is investigated. The activity of 186Re was measured after a cooling time of 4 days, using a liquid beta scintillation system and a dose calibrator. Also, activity of the samples were calculated using fluxes determined by Monte Carlo simulation of the reactor core. The calculated and measured values for the activity of irradiated samples are comparable in the range of ±18% and the irradiation correction factors are 1.135 and 0.820 for natural rhenium (thermal neutron flux of 6.5×1013 cm-2 s-1)and rhenium samples with high the isotope abundance of 185Re (thermal neutron flux of 1.18×1013 cm-2 s-1), respectively. The results have shown that 186Re samples (in the form of perrhenate) can be achieved with 96.5% radiochemical purity and 99% radionuclidic purity. The products with the high specific activity of about 300mCi/mg for therapeutical aplications can be achieved in T.R.R. using rhenium sample target with a high abundance from rhenium-185 target; and for the medium with the mean specific activity, natural rhenium can be used.}, keywords = {}, title_fa = {تولید و ارزیابی رادیونوکلید Re186 با استفاده از رآکتور تحقیقاتی تهران برای مقاصد درمانی}, abstract_fa = {در این طرح تحقیقاتی، تولید رادیونوکلید Re186 از طریق واکنش Re186(n,γ)Re185 در رآکتور تحقیقاتی تهران (T.R.R) مورد مطالعه قرار گرفت. فعالیت Re186 تولید شده، پس از یک زمان خنک‌سازی 4 روز با استفاده از یک شمارگر سوسوزن مایع و یک دز کالیبراتور اندازه‌گیری شد. هم‌چنین فعالیت نمونه‌ها با استفاده از شار نوترونی به دست آمده از شبیه‌سازی مونت‌کارلو قلب رآکتور محاسبه شدند. مقادیر محاسبه شده و اندازه‌گیری شده‌ی فعالیت با اختلاف 18 درصد با یک‌دیگر قابل قیاس بودند و ضرایب تجربی تصحیح فعال‌سازی برای نمونه‌های رنیم طبیعی (شار نوترون گرمایی 6.5×1013 cm-2 s-1) و رنیم غنی‌شده از Re185 (شار نوترون گرمایی 1.18×1013 cm-2 s-1) برای رآکتور تحقیقاتی تهران، به ترتیب برابر، با 0.820و 1.135  به دست آمد. نتایج نشان داد که Re186 به شکل پررنات با خلوص رادیوشیمیایی و رادیونوکلیدی، به ترتیب، برابر با 96.5%  و 99 درصد قابل دست‌یابی است. رنیم با فعالیت ویژه‌ی بالا (در حدود mCi/mg300) برای مصارف درمانی از هدف رنیم با غنای بالای Re185 در رآکتور تحقیقاتی تهران قابل دست‌یابی می‌باشد و برای نمونه‌های با فعالیت ویژه‌ی متوسط از رنیم طبیعی می‌توان استفاده نمود.}, keywords_fa = {رنیم-186,تولید ایزوتوپ,کاربردهای درمانی,شار نوترون,نوترون‌های حرارتی,رآکتور تحقیقاتی تهران,روش مونت‌کارلو,فراوانی عناصر}, url = {https://jonsat.nstri.ir/article_466.html}, eprint = {https://jonsat.nstri.ir/article_466_836c4cb5dd0263e1891569dce4660182.pdf} } @article { author = {Sadighzade, A and Rostami, M and Sana, S}, title = {Study of Gaseous Pollutants Purification and Filtration System of Uranium Conversion Facility (UCF)}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {31}, number = {1}, pages = {63-69}, year = {2010}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Gaseous pollutants purification and filtration system of Uranium Conversion Facility includes four Foam Scrubbers and four groups of 24 frame filters to remove dangerous gases and particles from polluted air. In this paper, the purification processes of the dangerous gases in foam towers and removal of the particles in filters are presented. The gas pollution of this facility includes dangerous chemical and radioactive compounds; as a result the high efficiency can be one of the main properties of this purification system. For achieving this goal, theoretical and experimental studies are made to select filter frame media. Our theoretical studies show that the characteristics of the best filter media are: upper thickness, high porosity and formed by fine fibers. The experimental studies to select suitable media concerning efficiency, pressure drop, chemical and mechanical resistance are done in 30 filter media. The efficiency of chosen media is determined of about 99.7% by the experiment. In addition, a semi industrial sample of foam scrubber system was designed and built. The absorption efficiency of the system for acidic gas, the same as in UCF, was measured to be about 97%. Considering these results and prevailing the standards used in UCF and also the level of air pollution in workshops, the air pollution level in the stack outlet must not surpass the authorized amount.  }, keywords = {Purification and Filtration,Gaseous Pollutants,Uranium Conversion Facility,Foam Scrubbers System}, title_fa = {مطالعه‌ی سیستم پالایش و تصفیه‌ی آلاینده‌های گازی تأسیسات فرآوری اورانیم اصفهان}, abstract_fa = {سیستم پالایش و تصفیه‌ی آلاینده‌های گازی تأسیسات فرآوری اورانیم (UCF) متشکل از چهار دستگاه فوم اسکرابر برای جذب آلاینده‌های گازی خطرناک و چهار مجموعه‌ی 24 تایی از فریم فیلتر برای ربایش ذرات می‌باشد. در این مقاله، فرایندهای شستشو و جذب گازهای خطرناک در فوم تاورها و تصفیه و ربایش ذرات در فیلترها ارایه می‌شود. آلاینده­های گازی این تأسیسات فرآوری، حاوی ترکیبات شیمیایی و پرتوزا می‌باشد. بنابراین کارآیی بالا باید از ویژگی‌های این سیستم پالایش باشد. برای نیل به این هدف، مطالعات نظری و تجربی برای انتخاب بسترهای فریم فیلترها انجام شد. مطالعات نظری نشان داد که بهترین بستر فیلتر دارای ضخامت و تخلخل بالا و قطر الیاف پایین می‌باشد. مطالعات تجربی برای انتخاب بستر‌های مناسب به صورت تابعی از کارآیی، افت فشار، مقاومت شیمیایی و مکانیکی بر روی 30 عدد بستر فیلتر انجام شد. هم‌چنین نمونه‌ی سیستم پالایش در مقیاس نیمه‌صنعتی طراحی و ساخته شد و کارآیی جذب آن برای آلاینده­های گازی و پارامترهای اثرگذار مورد مطالعه قرار گرفت. نتایج بررسی‌های تجربی نشان داد که کارآیی حذف آلاینده‌های ذره‌ای و گازی سیستم پالایش تأسیسات فرآوری اورانیم اصفهان، به ترتیب، بیش از 99.7%  و 97%است. با توجه به این نتایج و استانداردهای مورد استفاده در تأسیسات فرآوری اورانیم اصفهان و میزان آلودگی کارگاه‌ها، سطح آلاینده‌ها در خروجی دودکش نباید بیش از حد مجاز باشد.}, keywords_fa = {پالایش و تصفیه,آلاینده‌های گازی,تأسیسات فرآوری اورانیم,سیستم فوم اسکرابر}, url = {https://jonsat.nstri.ir/article_467.html}, eprint = {https://jonsat.nstri.ir/article_467_087dd4b52833c8ac826d94f213ae205f.pdf} } @article { author = {Azadbakht, B and Hadad, K and Zahmatkesh, M.H}, title = {Investigation of Percentage Depth Dose (PDD) and Dose Rate Dependence of PAGAT Polymer Gel Dosimeter for Photon Beams Using MRI Technique}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {31}, number = {1}, pages = {70-76}, year = {2010}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {In this work, the investigation of the normoxic PAGAT polymer-gel dosimeter percentage depth dose (PDD) and it’s dose rate dependence has been made. Using MRI, the formulation to give the maximum change in the transverse relaxation rate R2 was determined to be 4.5% N,N'-methylen-bis-acrylamide©(bis), 4.5% acrylamid (AA), 5% gelatine, 5mM tetrakis (hydroxymethyl) phosphonium chloride (THPC), 0.01 mM hydroquinone (HQ) and 86% HPLC(Water). Irradiation of vials was performed using photon beams of Co-60 therapy unit and an Electa linear accelerator. Gel dosimeters were imaged in a Siemens Symphony 1.5 Tesla clinical MRI scanner using a head coil. Post-manufacture irradiation and post imaging times were both selected to be 1 day. For determing the percentage depth dose of the PAGAT gel it was found that at the depth of 21cm, the percentage depth dose for 1.25 MeV γ-ray photons of 60Co and for 4,6 and 18 MV x-ray photons of Electa linear accelerator, are 48%, 52%, 57.3% and 59.73%, respectively. Thus, in the case of the higher energy photon beams, a higher dose can be delivered to deep-seated tumors. The dose rate dependence of PDD was studied for 6 MV x-ray photons with the use of dose rates of 80, 160, 240, 320, 400 and 480cGy/min. No trend in polymer-gel dosimeter 1/T2 dependence was found on the mean dose rate and energy for the photon beams.}, keywords = {}, title_fa = {بررسی درصد دز عمقی باریکه‌های فوتونی و وابستگی آن به آهنگ دز در دزیمتر ژلی- پلی‌مری نورمکسیک PAGAT با استفاده از تکنیک ام.آر.آی}, abstract_fa = {برای تعیین درصد دز عمقی باریکه‌های فوتونی با انرژی‌های مختلف در دزیمتر ژلی- پلی‌مری PAGAT و وابستگی آن به آهنگ دز با استفاده از تکنیک ام.آر.آی از مواد و ترکیبات شیمیایی با درصدهای وزنی زیر استفاده شده است: 4.5% بیس N-N' متیلن- بیس-آکریل‌آمید 4.5% آکریل‌آمید، 5 درصد ژلاتین، 5 میلی‌مول تتراکیس، 0.01 میلی‌مول هیدروکینون و 86 درصد آب دو بار تقطیر شده. برای تابش‌دهی ویال‌ها از فوتون‌های Co60 دستگاه درمانی سری c780-Theratron انستیتو پرتو پزشکی نوین تهران و شتاب‌دهنده‌ی خطی الکتا بیمارستان نیروی هوایی تهران استفاده شده است. تصویربرداری با استفاده از یک سیستم ام.آر.آی ساخت شرکت زیمنس به قدرت 1.5 T انجام شده است. تمام ژل‌های پلی‌مری یک روز پس از ساخت، پرتودهی شده و یک روز بعد از پرتودهی با استفاده از سیستم ام.آر.آی تصویربرداری شده‌اند. در تعیین درصد دز عمقی در ژل پلی‌مری نورمکسیک PAGAT، برای انرژی‌های بالاتر، فوتون‌ها تمایل به نفوذ بدون پراکندگی در ماده داشته و پراکندگی فوتون‌ها نیز رو به جلو می‌باشد. میزان دز عمقی باریکه‌های فوتونی Co60 در عمق 0.5 cm برابر 100 درصد بوده و برای عمق cm21 این مقدار به 48 درصد کاهش یافته است و برای فوتون‌های 4، 6 و MV18 شتاب‌دهنده میزان دز عمقی بیشینه برای عمق cm21، به ترتیب، به مقادیر 52، 57.3 و 59.73%, کاهش یافته است و این نشان می‌دهد که برای انرژی‌های بالاتر میزان تجمع دز در فواصل عمقی بیش‌تر خواهد بود. بررسی حساسیت ژل PAGAT به آهنگ دز نشان داد که با تغییر آهنگ دز از 80 به cGy/min480 تغییری در مقادیر آهنگ واهلش عرضی، 2R، مشاهده نشده است. به عبارت دیگر این نشان می‌دهد که ژل پلی‌مری PAGAT به آهنگ دز وابسته نبوده و در نتیجه می‌توان برای بالا بردن سرعت پرتودهی و کاهش زمان پرتودهی از آهنگ‌های دز بالاتر استفاده نمود.}, keywords_fa = {دزیمتر ژلی- پلی‌مری,ژل پلی‌مری نورمکسیک PAGAT,درصد دز عمقی,آهنگ دز}, url = {https://jonsat.nstri.ir/article_468.html}, eprint = {https://jonsat.nstri.ir/article_468_a618388137d02b6b6cfc88ee20a8f054.pdf} } @article { author = {Gholampoor, M and Gheisari, J and Mirjalili, Gh and Shafaie, M.A and shekari, l and Moini, A.R and Shahvar, A}, title = {Preparation of CaF2 Thermoluminescence Dosimeter and Investigating of the Influence of Dy Impurity in it’s Dosimetric Properties}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {31}, number = {1}, pages = {77-82}, year = {2010}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {In this study, CaF2 pellet samples were prepared and its thermoluminescence (TL) properties were investigated after gamma irradiation. The TL glow curve of the CaF2 pellet has four peaks at around 135, 170, 260 and 370ºC for the heating rate of 10ºC/S. The main peak occurs at 260ºC. The sensivity of CaF2 and Dy doped CaF2 were examined. The observed TL sensivity of the prepared CaF2 pellet is abut five times than that of TLD-100. The sensivity of the Dy doped CaF2 is approximately 18 times higher than that of TLD-100. The fading is approximately 13% in one day, 36% in two days and 50% in 500 hours. These examinations repeated for 10 times and all the results were found to be consistant. These properties make the CaF2 pellets a useful can dilate for γ-ray irradiation dosimetry applications.}, keywords = {Calcium Fluoride,Thermoluminescence Dosimeter,Dy,Glow Curve,Sensitivity,Fading}, title_fa = {ساخت دزیمتر ترمولومینسانس کلسیم فلورید و بررسی تأثیر ناخالصی Dy بر خواص دزیمتری آن}, abstract_fa = {در این کار تحقیقاتی، نمونه­های کلسیم فلورید، به شکل قرص، تحت تابش گامای چشمه‌ی کبالت قرار داده شد و بلافاصله شدت نوردهی توسط دستگاه TLDخوان تعیین گردید. قله‌های منحنی درخشش در دماهای تقریباً برابر 135، 170، 260 و 370 درجه‌ی سانتی‌گراد مشاهده شد. قله‌ی اصلی در دمای 260 درجه‌ی سانتی‌گراد قرار دارد. در این پژوهش حساسیت کلسیم فلورید خالص و تأثیر ناخالصی دیسپروسیم (Dy) بر آن بررسی و با مقدار 2 درصد مولی دیسپروسیم بیش‌ترین میزان حساسیت مشاهده شد. حساسیت این دزیمتر حدود 5 برابر 100TLD- است که با افزودن ناخالصی دیسپروسیم به حدود 18 برابر رسید. میزان محوشدگی در دمای اتاق در طول یک روز، دو روز و 500 ساعت، به ترتیب، 13، 36 و 50 درصد تعیین گردید. پس از 10 بار تکرار پرتودهی، و متعاقب آن انجام عملیات خواندن و بازپخت تحت شرایط معین، تکرارپذیری این دزیمتر مورد تأیید قرار گرفت.}, keywords_fa = {کلسیم فلورید,دزیمتر ترمولومینسانس,دیسپروسیم,منحنی درخشندگی,حساسیت,محوشدگی}, url = {https://jonsat.nstri.ir/article_469.html}, eprint = {https://jonsat.nstri.ir/article_469_ba7921721e38c21b9bf9acb7ce7efbdc.pdf} }