@article { author = {Keshtkar, A and Montazer Rahmati, M.M and Khodapanah, N}, title = {Application of Two-Parameter and Three-Parameter Isotherm Models at Uranium Biosorption by Baker's Yeast}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {30}, number = {4}, pages = {1-8}, year = {2010}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {In this work, the ability of free and immobilized deactivated baker's yeast saccharomyces cerevisiae to remove uranium ions was investigated using a batch biosorption procedure with respect to the initial pH (3.0-6.0), contact time (24 h), initial ion concentration (50-400 mg/g) and presence of secondary ions (Cr (VI)). The removal of uranium was approximately 90% and 50% at low concentrations, whereas it was about 80% and 15% at high concentrations at an optimum pH of 5 and 5.5, using 1 g/l of adsorbent in 24 h of equilibration time for immobilized and free baker's yeast, respectively. Experimental results at 30ºC indicated that the uptake capacity of uranium ions by immobilized baker's yeast biomass on calcium alginate was reduced by the presence of secondary ions. The experimental data obtained at the optimum have been analyzed using two two-parameter models, Langmuir and Freundlich, and one three-parameter model, Redlich–Peterson. Taking into three statistical error functions, the data were best fitted to the Redlich–Peterson model. Using the Langmuir equation, the saturated monolayer sorption capacities of uranium ions onto immobilized and free baker's yeast were 592.8 and 73 mg/g, respectively at 30ºC.}, keywords = {Uranium Biosorption,Baker's Yeast,Calcium Aliginate,Chromium (VI),Modeling,Equilibrium Isotherm}, title_fa = {کاربرد ایزوترم‌های جذب دو و سه‌پارامتری در جذب زیستی اورانیم توسط مخمرنان}, abstract_fa = {در این تحقیق جذب  زیستی اورانیم از محلول­های آبی توسط مخمرنان و مخمرنان تثبیت شده بر پایه‌ی کلسیم آلژینات، در دمای ºC30 مورد مطالعه قرار گرفت و ایزوترم­های تعادلی جذب دوپارامتری و سه­پارامتری مدل‌سازی شدند. در ادامه، اثر حضور یون کروم (VI) بر میزان جذب اورانیم توسط مخمرنان تثبیت شده بررسی شد. نتایج آزمایشگاهی نشان داد که pH بهینه برای جذب اورانیم توسط مخمرنان تثبیت شده و مخمرنان آزاد به ترتیب برابر 5 و 5/5 می­باشد. بررسی تأثیر غلظت اولیه‌ی اورانیم بر میزان جذب نشان داد که با افزایش غلظت اولیه‌ی اورانیم، میزان جذب افزایش می­یابد و این افزایش در غلظت­های پایین­تر، تا رسیدن به یک مقدار ثابت، شدیدتر می­باشد. نتایج تجربی نشان داد که میزان جذب اورانیم بر روی مخمرنان تثبیت شده به مراتب بیش‌تر از مخمرنان می­باشد. میزان جذب برای مخمرنان تثبیت شده و مخمرنان آزاد در pH بهینه‌ی مربوط به هر کدام، طی زمان تماس 24 ساعت و با مقدار زیست توده‌ی  g/l1 در غلظت‌های پایین، به ترتیب، حدود 90 و 50 درصد و در غلظت‌های بالا، به ترتیب، حدود 80 و 15 درصد به دست آمد. ایزوترم­های جذب مورد مطالعه شامل 2 مدل دوپارامتری لانگمویر و فروندلیش و مدل سه­پارامتری ردلیش-پترسون می­باشند. برای یافتن بهترین ایزوترم، از سه روش تحلیل خطا برای بررسی نتایج تجربی استفاده شد. این روش­ها شامل ضریب همبستگی، خطای ریشه‌ی میانگین مربعی و آزمون مجذورکی می‌باشد. تحلیل خطاها نشان داد که مدل سه­پارامتری بهتر می­تواند جذب زیستی اورانیم را در مقایسه با مدل­های دوپارامتری برازش کند. هم‌چنین میزان جذب بیشینه برای دو زیست توده مخمرنان تثبیت شده و مخمرنان آزاد، توسط ایزوترم لانگمویر، به ترتیب، برابر 8/592 و mg/g 73 محاسبه شد.}, keywords_fa = {جذب زیستی اورانیم,مخمرنان,آلژینات کلسیم,کروم (VI),مدل‌سازی,ایزوترم تعادلی}, url = {https://jonsat.nstri.ir/article_470.html}, eprint = {https://jonsat.nstri.ir/article_470_59ca657c0b43e74ad309e97f3eb1b48c.pdf} } @article { author = {Meftahi, M and Bahrami Samani, A and Babaei, M.H and Shamsaei Zafarghandi, M and Ghannadi Maragheh, M}, title = {Biodistribution Study of 153Sm-EDTMP Produced by Irradion of Natural and Enriched Samarium, in Rats}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {30}, number = {4}, pages = {9-13}, year = {2010}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {153Sm-EDTMP is one of the well known radiopharmaceuticals for pain palliation of bone metastases. Despite that, it is used just in a few countries. It is due to some reasons like being costly enriched samarium that usually used as target for irradiation and short half-life of 153Sm. In this investigation, certain amounts of radiopharmaceuticals prepared by irradiation of enriched and natural samarium were injected to some normal rats. Then, the rodents were sacrificed and some of their organs were removed. All of the mentioned stages were performed in order to consider the possibility of exploiting natural samarium instead of enriched samarium by study of biodistribution of both radiopharmaceuticals in various organs especially in bone as the target tissue. At the end, the acceptable results were obtained using natural samarium in comparison with the enriched samarium from the point of view of the biodistribution studies.}, keywords = {Biodistribution,Radiopharmaceutical 153Sm-EDTMP,Irradiation,Natural Samarium and Enriched Samarium}, title_fa = {بررسی توزیع بیولوژیکی رادیوداروی Sm-EDTMP153 حاصل از پرتودهی هدف‌های ساماریم طبیعی و غنی شده در موش‌های صحرایی}, abstract_fa = {Sm-EDTMP153 یکی از رادیوداروهای شناخته شده برای تسکین دردهای ناشی از متاستاز استخوان می‌باشد. با این وجود، این رادیودارو تنها در تعداد اندکی از کشورها استفاده می‌شود. این امر ناشی از عوامل مهمی چون قیمت بالای ساماریم غنی شده (که به طور معمول به عنوان هدف برای پرتودهی استفاده می‌شود) و نیم- عمر کوتاه Sm153 می‌باشد. در این پژوهش، پس از پرتودهی نمونه‌های طبیعی و غنی‌شده‌ی ساماریم و انجام عمل نشان‌دارسازی، مقادیر مشخصی از رادیوداروهای به دست آمده به تعدادی موش صحرایی تزریق و در بازه‌های زمانی معین این موش‌ها قربانی شده و برخی از اندام‌های آن‌ها جدا گردید تا با بررسی توزیع فعالیت در اندام‌های مختلف و به ویژه استخوان به عنوان بافت هدف، امکان استفاده از ساماریم طبیعی به جای نمونه‌ی غنی شده بررسی شود. بر این اساس، ملاحظه شد که از نقطه‌نظر توزیع بیولوژیکی، نتایج قابل‌قبولی برای نمونه‌ی طبیعی در مقایسه با نمونه‌ی غنی شده حاصل می‌شود.}, keywords_fa = {توزیع بیولوژیکی,رادیوداروی Sm-EDTMP153,پرتودهی,ساماریم طبیعی و ساماریم غنی شده}, url = {https://jonsat.nstri.ir/article_471.html}, eprint = {https://jonsat.nstri.ir/article_471_6786acaa27719caf366ab7de8c194cab.pdf} } @article { author = {Sheikh, N and Kianfar, S}, title = {Preparation of Polyvinyl Alcohol Absorbent films: Comparison of Radiation and Chemical Crosslinked Films}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {30}, number = {4}, pages = {14-20}, year = {2010}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Polymeric absorbents are extensively used in the separation systems. In this paper, the preparation and characterization of a polymeric absorbent is considered. For this purpose Polyvinyl alcohol (PVA) films were prepared and then crosslinked by radiation method using gamma-ray and chemical methods by the use of Glutaraldehyde solution. In the chemical method, the reaction with and without sulphuric acid and in the radiation method the reaction in dry and also aqueous media containing acid were carried out. The gel content, water uptake and tensile properties were measured for all samples. The results showed that the radiation method in aqueous media containing acid led to the maximum gel formation. In addition, the radiation method led to the formation of films with more flexibility. Nickel and Manganese adsorptions were measured on the crosslinked films, which were obtained by the radiation and chemical methods. These measurements were made as a function of pH and also the concentration of metal ion in the solution. The maximum metal adsorption was found at pH=7. In addition, with increasing the metal ion concentration the amount of ion adsorption was increased. In general, our studies showed that an absorbent which is prepared by the radiation method is suitable for water adsorption and another formed by the chemical method is desirable in ion adsorption processes.}, keywords = {Polyvinyl Alcohol,Radiation Crosslinking,Chemical Crosslinking,Mechanical properties,Metal Ion Adsorption}, title_fa = {تهیه‌ی فیلم‌های جاذب پلی‌وینیل الکل: مقایسه‌ی فیلم‌های شبکه‌ای شده‌ی شیمیایی و پرتوی}, abstract_fa = {جاذب‌های پلی‌مری در سیستم‌های جداسازی کاربرد وسیعی دارند. در این مقاله به تهیه و بررسی نوعی جاذب پلی‌مری پرداخته می‌شود. بدین منظور فیلم‌های پلی‌وینیل الکل پس از تهیه شدن، از دو طریق شیمیایی با استفاده از محلول گلوتارالدیید، و پرتوی با استفاده از پرتو گاما، شبکه‌ای شدند. در روش شیمیایی حضور و عدم حضور سولفوریک اسید در محیط و در روش پرتوی، محیط خشک و محیط آبی حاوی اسید مورد بررسی قرار گرفت. میزان جذب آب، درصد ژل و خواص کششی فیلم‌های شبکه‌ای شده برای هر دو روش مورد ارزیابی قرار گرفت. نتایج نشان داد که حداکثر درصد جذب آب در روش پرتوی و در محیط آبی حاوی اسید صورت می‌گیرد. به علاوه روش شبکه‌ای شدن پرتوی منجر به تهیه‌ی فیلم‌های نرم‌تر می‌گردد. میزان جذب دو فلز نیکل و منگنز توسط فیلم‌های شبکه‌ای شده به روش پرتوی و شیمیایی، برحسب pH و غلظت یون فلزی، بررسی گردید. بیشینه جذب فلز در 7=pH مشاهده شد. به علاوه با افزایش غلظت یون فلزی مقدار جذب یون افزایش یافت. به طور کلی بررسی‌ها نشان داد که جاذب تهیه شده به روش پرتوی برای فرایندهای جذب آب، و جاذب تهیه شده به روش شیمیایی در فرایندهای جذب یون فلزی موفق‌تراند.}, keywords_fa = {پلی‌وینیل الکل,شبکه‌ای شدن پرتوی,شبکه‌ای شدن شیمیایی,خواص مکانیکی,جذب یون فلزی}, url = {https://jonsat.nstri.ir/article_472.html}, eprint = {https://jonsat.nstri.ir/article_472_adf21eec142673e436624ae3ddfe40c8.pdf} } @article { author = {Davarpanah, M.R and Attar Nosrati, S and Kazemi Boudani, M and Fazlali, M and Khoshhosn, H.A and Ghannadi Maragheh, M}, title = {Preparation of Zirconium Molybdate Gel and Evaluation of its Physico-Chemical Characteristics Effects on 99mTc Generators Performances}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {30}, number = {4}, pages = {21-28}, year = {2010}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Zirconium molybdate gel has an excellent characteristic to be used as a column matrix material of 99mTc generators. The preparation conditions of zirconium molybdate gels will directly influence their physico-chemical characteristics and thus generator performances. In this work a series of zirconium molybdate gels were synthesized under different conditions and characterized by ICP, TGA, XRD and SEM Techniques. The effects of different parameters including pH of molybdate solution, Zr:Mo molar ratios, order of reactants addition, washing and granulating of gel on the performance of technetium-99m generators were evaluated. The experiments show that the optimum conditions for synthesis of the gel consist of: pH=4-4.5, Zr:Mo ratio of 1:1, gradual addition of molybdate solution to zirconium oxy chloride solution, no washing and grinding the resulted gel.}, keywords = {99mTc Generators,Chromatographic Separation,Zirconium Molybdate,Technetium-99m}, title_fa = {تهیه‌ی ژل زیرکونیم مولیبدات و بررسی تأثیر خصوصیات فیزیکوشیمیایی آن بر کارآیی ژنراتورهای تکنسیم-m99}, abstract_fa = {ژل زیرکونیم مولیبدات خواص فوق‌العاده­ا­ی را در استفاده از آن به عنوان ماتریس ستون ژنراتورهای mTc99 نشان داده است. شرایط سنتز ژل زیرکونیم مولیبدات مستقیماً تعیین‌کننده‌ی خواص فیزیکوشیمیایی آن و از این‌رو کارآیی آن در ژنراتورهای mTc99Mo/99 می­باشد. در این تحقیق نمونه­های مختلفی از ژل زیرکونیم مولیبدات تحت شرایط مختلف سنتز شده و با استفاده از روش‌های ICP، TGA، SEM و XRD شناسایی شدند. تأثیر عواملی از قبیل pH محلول مولیبدات، نسبت مولی Zr:Mo، ترتیب افزایش واکنش‌گرها، شستشوی ژل و نحوه‌ی دانه‌دانه کردن آن بر کارآیی ژنراتورهای تکنسیم-m99، به منظور دست‌یابی به شرایط بهینه، مورد بررسی قرار گرفت. آزمایش‌ها نشان دادند که شرایط بهینه‌ی سنتز عبارت از pH=4-4.5 برای محلول مولیبدات، نسبت 1:1 برای Zr:Mo، افزایش تدریجی محلول مولیبدات به محلول زیرکونیم اکسی‌کلرید، عدم شستشوی ژل حین عمل آب‌گیری و آسیاب کردن ژل حاصل می­باشد.}, keywords_fa = {ژنراتورهای تکنسیم-m99,جداسازی به روش کروماتوگرافی,زیرکونیم مولیبدات,تکنسیم-m99}, url = {https://jonsat.nstri.ir/article_473.html}, eprint = {https://jonsat.nstri.ir/article_473_67d953a3f9b5796fab7994831df264cf.pdf} } @article { author = {Jalilian, A.R and Panahifar, A and Mahmoudi, M and Akhlaghi, M and Simchi, A}, title = {Preparation and Biological Evaluation of [67Ga]-Labeled-Superparamagnetic Iron Oxide Nanoparticles in Normal Rats}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {30}, number = {4}, pages = {29-36}, year = {2010}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Gallium-67 labeled superparamagnetic iron oxide nanoparticles ([67Ga]-SPION) were prepared and evaluated for their altered biodistribution in normal rats. SPIONs with narrow size distribution were synthesized by co-precipitation technique using ferric and ferrous salts at molar ratio Fe3+/Fe2+=2:1 followed by structure identification using XRD, TGA, DSC, VSM, HRSEM, TEM and FT-IR techniques. In order to trace SPION bio-distribution, the radiolabeled iron oxide nanoparticles were prepared using 67Ga with a high labeling efficiency (over 96%, determined by RTLC method) and they also showed an excellent stability at room temperature for at least 4 days. The biodistribution of the radiolabeled SPION was checked in normal male rats up to 24 hours compared with the free Ga3+ cation biodistribution. The data strongly support the alteration of the tracer accumulation in reticuluendothelial system while the stability of the complex is highly retained. The result is promising for determining the position of the nanoparticles injected into a tissue when hyperthermia treatment/imaging is applied in biomedical fields.}, keywords = {Superparamagnetism,Iron Oxides,Gallium 67,Biodistribution,Labeled Compounds}, title_fa = {تهیه و بررسی زیستی نانوذرات ابر پارامغناطیسی اکسید آهن نشان‌دار شده با گالیم-67 در موش صحرایی سالم}, abstract_fa = {نانوذرات ابر پارامغناطیسی اکسید آهن (SPION) پس از تهیه شدن، با هدف بررسی پراکنش زیستی این ذرات در بدن موش صحرایی، با گالیم-67 نشان‌دار شدند تا Ga]-SPION67[ به دست آید. نانوذرات ابر پارامغناطیسی اکسید آهن با دانه‌بندی کوچک با روش هم‌رسوبی با استفاده از نمک‌های آهن 3Fe+ و 2Fe+ با نسبت مولی 2 به 1 سنتز شدند. از روش­های شناسایی XRD، TGA، DSC، VSM، HRSEM، TEM و FT-IR برای بررسی خواص و ابعاد نانوذرات حاصله استفاده شد. به منظور ردیابی جذب بافتی SPION، نانوذرات اکسید آهن نشان‌دار شده با گالیم-67، با بازده نشان‌دارسازی بالا (بیش از 96%، تعیین شده با روش RTLC) سنتز شدند. نانوذرات سنتز شده پایداری بسیار خوبی را در دمای اتاق و حداقل برای 4 روز نشان دادند. پراکنش زیستی Ga]-SPION67[ در موش صحرایی سالم تا 24 ساعت بررسی و با از پراکنش یون 3Ga+67 مقایسه گردید. نتایج به طرز قابل توجهی تجمع ذرات نشان­دار شده در سیستم رتیکولواندوتلیال را تأیید کردند. این نتیجه نه تنها قابلیت استفاده از ترکیب فوق برای تعیین مکان نانوذرات تزریق شده به بافت‌ها در هنگام گرمادرمانی و یا عکس‌برداری پزشکی را نشان می‌دهد، بلکه امکان استفاده‌ی هم‌زمان این ذرات با رادیوداروهای درمانی را نیز پیشنهاد می‌کند.}, keywords_fa = {ابرپارامغناطیس,اکسیدهای آهن,گالیم 67,پراکنش زیستی,ترکیبات نشان‌دار}, url = {https://jonsat.nstri.ir/article_474.html}, eprint = {https://jonsat.nstri.ir/article_474_babf781aaa2b821f62bc138ad407c56c.pdf} } @article { author = {Ghasemi, M.R and Shamsai Zafarghandi, M and Raisali, G and Ghannadi Maragheh, M and Shahvar, A and Mahati, S.M}, title = {Monte Carlo Simulation of Dose Absorption of Nano-Particles-Labeled Tissues Used in X-Ray Microbeam Radiation Therapy}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {30}, number = {4}, pages = {37-47}, year = {2010}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {One of the most important measures of therapeutic quality in Microbeam Radiation Therapy (MRT) is the Peak to Valley Dose Ratio (PVDR). This parameter is a criterion to evaluate ablation of cancerous cells and sparing of normal cells in tumor and in its surrounding region. The aim of this work is to study the influence of using gold and gadolinium nano-particles as contrast agents on dose distribution and PVDR when a phantom is irradiated by a typical micro-planar X-ray beam of European Synchrotron Radiation Facility (ESRF3). Using Geant4 computer code, a model has been designed to simulate depth dose in an intact phantom made of PMMA4 and dose distribution in a phantom containing assumed tumors in therapeutic techniques of MIMRT5 and BIMRT6. Comparison of simulated results in the intact phantom with the measured values of depth dose reveals the validity of our simulation with the designed model. To improve the efficiency of MRT, enhancement of absorbed dose in tumor tissues and sparing of normal tissues due to presence of contrast agents have been studied. The obtained results show that the enhancement is more noticeable for Au at the peak region and for Gd in the valley region. This approach of introducing contrast agents in MRT could hopefully prepare new treatment planning and improves the efficiency of tumor therapy.}, keywords = {X-Ray Micro-Beam,Dose Distribution,Tumor,Gold,Geant4 code,Gadolinium,Nano-Particles}, title_fa = {شبیه‌سازی مونت‌کارلو دز جذبی بافت‌های نشاندار شده با نانو ذرات در پرتو درمانی ریز باریکه‌ای با پرتوهای ایکس}, abstract_fa = {یکی از مهم‌ترین شاخصه‌های کیفیت درمان در روش پرتودرمانی ریز باریکه‌ای (MRT)، نسبت دز قله به دره (PVDR) است. این پارامتر، معیاری برای سنجش میزان نابودی سلول‌های سرطانی و حفظ سلول‌های سالم موجود در ناحیه‌ی تومور و اطراف آن می‌باشد. هدف از این تحقیق، مطالعه‌ی تأثیر استفاده از نانو ذرات طلا و گادولینیم به عنوان عامل فعال‌ساز در توزیع دز و پارامتر PVDR می‌باشد که در آن، پرتودهی بافت موردنظر با ریزباریکه‌های صفحه‌ای ایکس گسیلیده از سینکروترون مرکز تأسیسات تابش سینکروترون اروپایی (ESRF)، در نظر گرفته شده است. با استفاده از کد کامپیوتری Geant4، مدلی طراحی شد تا دز عمقی در فانتومی از جنس پلی‌متیل‌متاآکریلات (پرسپکس) (PMMA) خالص و توزیع دز در روش‌های پرتودرمانی ریز باریکه‌ای چند جهته‌ی درهم بافته (MIMRT) و پرتودرمانی ریز باریکه‌ای دوجهته‌ی درهم بافته (BIMRT) در فانتوم حاوی تومورهای فرضی، شبیه‌سازی شود. مقایسه نتایج شبیه‌سازی دز عمقی در فانتوم خالص با نتایج اندازه‌گیری، بیان‌گر صحت شبیه‌سازی با استفاده از مدل طراحی شده می‌باشد. به منظور بهینه‌سازی روش پرتودرمانی ریز باریکه‌ای، افزایش دز بافت‌های سرطانی و حفاظت از بافت‌های سالم در حضور عوامل فعال‌ساز، مطالعه شده است. نتایج به دست آمده نشان می‌دهد که افزایش دز در ناحیه‌ی قله با ذرات طلا و در ناحیه‌ی دره با ذرات گادولینیم، قابل‌ملاحظه‌تر می‌باشد. این نگرش، به کارگیری عوامل فعال‌ساز در پرتودرمانی ریز باریکه‌ای، ارایه‌ی تدابیر جدید درمان و افزایش بازدهی درمان تومور را میسر می‌سازد.}, keywords_fa = {ریز باریکه‌های پرتو ایکس,توزیع دز,تومور,طلا,کد Geant 4,گادولینیم,نانوذرات}, url = {https://jonsat.nstri.ir/article_475.html}, eprint = {https://jonsat.nstri.ir/article_475_55c4246fcab77a53c51c23e3d11ba0a4.pdf} } @article { author = {Nazemi, S and Abbasi Davani, F}, title = {Cavity Dimensions Calculation of a Medical Linear Electron Accelerator}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {30}, number = {4}, pages = {48-55}, year = {2010}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {The main goal of this work is designing the cavity of an accelerator and performing its calculations. By choosing “π/2” oscillation mode and using Superfish code, cavity dimensions for the desired parameters were calculated. The most important dimension for determining the resonance frequency is the radius of cylindrical cavity. The required precision for the cavity construction has been obtained by calculating the frequency variations versus the dimensions variation. Also, with the resulted electric field from Superfish code, its Fourier expansion, and considering the unidirectional components of the traveling waves, the major effect of one component in accelerating and its proper velocity have been demonstrated.}, keywords = {Electron,Linear Accelerator (Linac),Superfish,Cavity}, title_fa = {محاسبه‌ی ابعاد کاواک یک شتاب‌دهنده‌ی خطی الکترون پزشکی}, abstract_fa = {طراحی و محاسبات کاواک شتاب‌دهنده، هدف اصلی این نوشته است. با انتخاب مد نوسانی 90 درجه، با استفاده از کد سوپرفیش ابعاد کاواک برای پارامترهای موردنظر محاسبه شده است. مهم‌ترین بعد برای تعیین فرکانس تشدید، شعاع کاواک استوانه‌ای می‌باشد. با محاسبه‌ی تغییرات فرکانس با تغییرات ابعاد، دقت موردنیاز برای ساخت کاواک به دست آمده است. هم‌چنین با استفاده از میدان الکتریکی حاصل از سوپرفیش و بسط فوریه‌ی آن و با در نظر گرفتن مؤلفه‌های موج‌رونده در یک جهت، اثر عمده‌ی مؤلفه دارای سرعت موج مناسب، در شتاب‌دهندگی نشان داده شده است.}, keywords_fa = {الکترون,شتاب‌دهنده‌ی خطی,سوپرفیش,کاواک}, url = {https://jonsat.nstri.ir/article_476.html}, eprint = {https://jonsat.nstri.ir/article_476_c096689ed9b5233f4269e375f19b56f3.pdf} } @article { author = {Nilchi, A and Hadjmohammadi, M.R and Rasouli Garmarodi, S}, title = {Sorption of 90Sr, 140La and 60Co on Synthesized Inorganic Ion Exchangers}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {30}, number = {4}, pages = {56-62}, year = {2010}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Three cation exchangers namely potassium zinc hexacyanoferrate (II) (PZF), ammonium molybdophosphate (AMP) and magnesium oxide-polyacrylonitrile composite (MgO-PAN) were synthesized. The physicochemical properties of these ion exchangers were determined using different techniques including infrared spectroscopy (IR), X-ray diffraction (XRD) and thermogravimetric analysis (TGA). Furthermore, the thermal stability and the effect of gamma irradiation up to 150kGy on these ion exchangers were investigated. The distribution coefficients of 90Sr, 140La and 60Co were studied for these ion exchangers by varying the pH conditions and by the use of batch method. The three prepared materials showed an increased trend in the sorption for three radionuclides (90Sr, 140La and 60Co) with the increasing of pH values from 1 to 7.}, keywords = {Potassium Zinc Hexacyanoferrate (II),Magnesium Oxide–Polyacrylonitrile Composite,Ammonium Molybdophosphate,Cation Exchanger}, title_fa = {جذب رادیونوکلیدهای Sr90، La140 و Co60 بر روی مبادله‌کننده‌های یونی معدنی سنتزی}, abstract_fa = {در این پژوهش، سه تبادل‌گر معدنی پتاسیم روی هگزاسیانوفرات (PZF)، کامپوزیت منیزیم اکسید- پلی‌اکریلونیتریل ((MgO-PAN و آمونیم مولیبد و فسفات ((AMP تهیه گردید. برای مطالعه‌ی خواص ترکیبات سنتز شده، تکنیک‌هایی مانند طیف‌سنجی مادون قرمز (IR)، پراش پرتو ایکس (XRD) و تجزیه‌ی گرماگرانی‌سنجی (TGA) به کار گرفته شد. هم‌چنین پایداری هر یک از تبادل‌گرها در برابر حرارت، و اثر جذب تابش گاما تا دز 150 کیلوگری مورد مطالعه و بررسی قرار گرفت. سپس خواص تبادل یونی هر یک از آن‌ها با محاسبه‌ی ضریب توزیع برای یون‌های +2Sr90، +3La140 و +2Co60 به روش ناپیوسته در pHهای مختلف بررسی گردید. نتایج نشان داد که میزان جذب کاتیون‌ها بر روی هر سه مبادله‌کننده با افزایش pH محلول از 1 تا 7 افزایش می­یابد.}, keywords_fa = {پتاسیم روی هگزاسیانوفرات,کامپوزیت منیزیم اکسید- پلی‌اکریلونیتریل,آمونیم مولیبد و فسفات,تبادل‌گر معدنی}, url = {https://jonsat.nstri.ir/article_477.html}, eprint = {https://jonsat.nstri.ir/article_477_ea3947844d151c943b317b9bbf933d05.pdf} } @article { author = {Salehi, H and Mollarazi, E and Abbasi, H}, title = {Silica-Gel Modified with Zirconium Oxide as a Novel 99Mo Adsorbent in 99mTc Generators}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {30}, number = {4}, pages = {63-67}, year = {2010}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {A new 99Mo adsorbent has been prepared with modified silica gel with zirconium oxide (SiO2/ZrO2:Na2MoO4) and used in technetium-99m generator. The adsorption behaviors of 99Mo in the form of molybdate and 99mTc in the form of pertechnetate on the new adsorbent was investigated showed that the adsorption capacity of molybdate on this generator was considerably higher than the usual generator with alumina column. Coating zirconium oxide on the surface of silica gel resulted in higher 99Mo adsorption of this compound. 99mTc is eluted with 0.9% NaCl, and the radionuclidic, radiochemical and chemical purities of the eluate were checked. This generator has a great potential as compared to the traditional alumina generators.}, keywords = {Technetium-99m Generator,Molybdenium-99,Chromatography,Zirconium Oxides}, title_fa = {سیلیکاژل اصلاح شده با زیرکونیم اکسید، به عنوان جاذبی جدید برای مولیبدن-99 در ژنراتورهای تکنسیم-m99}, abstract_fa = {جاذبی جدید برای مولیبدن-99- سیلیکاژل اصلاح شده با زیرکونیم اکسید (4MoO2Na:2ZrO/2SiO)ـ . تهیه و امکان استفاده از آن در ژنراتور تکنسیم-m99 مورد بررسی قرار گرفت. خصوصیات جذبی مولیبدن با ساختار مولیبدات و تکنسیم-m99 با ساختار پرتکنتات بر روی ستونی از این جاذب، بررسی و نشان داده شد که ظرفیت جذب مولیبدات بر روی ژنراتور با جاذب جدید بیش از ژنراتور معمولی است که در آن از ستون آلومینا استفاده می‌شود. زیرکونیم اکسید با جذب شدن بر سطح سیلیکا، خاصیت جذبی این ترکیب نسبت به مولیبدن-99 را به میزان قابل‌توجهی افزایش می‌دهد. تکنسیم-m99 توسط محلول 0.9%  از سدیم کلراید شسته شده و خلوص رادیونوکلایدی، رادیوشیمیایی و شیمیایی محلول‌های حاصله اندازه‌گیری شدند. ژنراتور جدید در مقایسه با ژنراتورهای آلومینای موجود از ظرفیت بالاتری برخوردار است.}, keywords_fa = {ژنراتور تکنسیم-m99,مولیبدن-99,کروماتوگرافی,اکسیدهای زیرکونیم}, url = {https://jonsat.nstri.ir/article_478.html}, eprint = {https://jonsat.nstri.ir/article_478_7f5de90f7e45b46ee245a978f0d2951d.pdf} } @article { author = {Parsaeian, M.R and Anvari, F and Kheirkhah, M and Haji Shabani, A.M and Behjat, A and Tabasi, M}, title = {Electron Beam Process for Decoloration of Reactive and Acid Dyes in Aqueous Solution in Presence of H2O2}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {30}, number = {4}, pages = {68-73}, year = {2010}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {In this study, degradation and decoloration of reactive and acid commercial dyes (C.I. Reactive Black 5 and C.I. Acid Red 151) in water under the irradiation with electron beams were investigated. Both dyes in aqueous solutions with the concentration of 100 ppm were irradiated at different doses of 1, 3, 6 and 9 kGy. The changes of the absorption spectra, degree of decoloration, pH, and chemical oxygen demand (COD) were analyzed. In addition to the influence of the absorbed dose the hydrogen peroxide additions on RB5 dye are discussed. The experimental results show that the reactive and acid dyes in aqueous solutions can be effectively degradiated by irradiation with the electron beam. The absorption bands for RB5 and AR151 decreased rapidly at 1kGy irradiation dose and disappeared almost completely at 9kGy. Also the degree of decoloration of RB5 solution at 1kGy dose and with the concentrations of H2O2 up to 5mmol/L was higher than 99.78%. Due to the production of organic and inorganic acidic anions the pH decreased during the irradiation.}, keywords = {Electron Beams,Reactive and Acid Dyes,Decoloration and Decomposition,H2O2}, title_fa = {استفاده از باریکه‌های الکترونی برای رنگ‌زدایی محلول‌های آبی رنگزاهای رآکتیو و اسیدی در حضور آب اکسیژنه}, abstract_fa = {در این تحقیق، تخریب‌پذیری و رنگ‌زدایی رنگ‌های تجاری رآکتیو و اسیدی (RB5) و (AR151) پرتودهی شده با باریکه‌های الکترونی مورد بررسی قرار گرفته است. محلول آبی‌ هر دو رنگ با غلظت ppm100 تا دزهای مختلف 1، 3، 6 و 9 کیلو‌گری پرتودهی شدند. تغییرات طیف جذبی، میزان رنگ‌زدایی، pH و اکسیژن شیمیایی مورد نیاز آن‌ها آزمایش شد. علاوه بر این اثر دز جذبی و افزایش آب اکسیژنه بر روی رنگ RB5 مورد بحث و بررسی قرار گرفته است. نتایج آزمایش‌ها نشان داد که محلول رنگی رنگ‌های رآکتیو و اسیدی به طور مؤثری با پرتوهای الکترونی تخریب و رنگ‌زدایی می‌شوند. نوار جذبی رنگ‌های RB5 و AR151 در دز kGy1 به‌ سرعت کاهش یافته و در دز kGy9 تقریباً به طور کامل ناپدید گردید. هم‌چنین میزان رنگ‌زدایی محلول RB5 با افزایش غلظت آب اکسیژنه تا mmol/L5 و در دز kGy1 به بالاتر از 99.78% رسید. pH محلول‌های رنگی مورد آزمایش نیز به دلیل تولید اسیدهای آلی و معدنی کاهش یافت.}, keywords_fa = {پرتوهای الکترونی,رنگ‌های رآکتیو و اسیدی,رنگ‌زدایی و تخریب‌پذیری,آب اکسیژنه}, url = {https://jonsat.nstri.ir/article_479.html}, eprint = {https://jonsat.nstri.ir/article_479_36b4b6fc088dd6696bbcad5080e69675.pdf} } @article { author = {Jamali Esfahlan, D and Madani, H and Tahmaseb Nezami, M.T and Mahdavi, F and Ghaderi, M.R and Najafi, M}, title = {Application of Covariance Clouds for Estimating the Anisotropy Ellipsoid Eigenvectors, with Case Study in Uranium Deposit}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {30}, number = {4}, pages = {74-79}, year = {2010}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Various methods of Kriging and nonlinear geostatistical methods considered as acceptable methods for resource and reserve estimations have characters such as the least estimation variance in their nature, and accurate results in the acceptable confidence levels range could be achieved if the required parameters for the estimation are determined accurately. If the determined parameters don’t have the sufficient accuracy, 3-D geostatistical estimations will not be reliable any more, and by this, all the quantitative parameters of the mineral deposit (e.g. grade-tonnage variations) will be misinterpreted. One of the most significant parameters for 3-D geostatistical estimation is the anisotropy ellipsoid. The anisotropy ellipsoid is important for geostatistical estimations because it determines the samples in different directions required for accomplishing the estimation. The aim of this paper is to illustrate a more simple and time preserving analytical method that can apply geophysical or geochemical analysis data from the core-length of boreholes for modeling the anisotropy ellipsoid. By this method which is based on the distribution of covariance clouds in a 3-D sampling space of a deposit, quantities, ratios, azimuth and plunge of the major-axis, semi-major axis and the minor-axis determine the ore-grade continuity within the deposit and finally the anisotropy ellipsoid of the deposit will be constructed. A case study of an uranium deposit is also analytically discussed for illustrating the application of this method.}, keywords = {Variogram,Anisotropy Ellipse,Covariance Clouds,Eigenvectors}, title_fa = {استفاده از ابرهای کوواریانس برای یافتن ویژه بردارهای بیضوی ناهمسانگردی عیار اورانیم همراه با ارایه‌ی یک نمونه‌ی کاربردی}, abstract_fa = {در روش‌های زمین‌آماری ارزیابی ذخایر و منابع مواد معدنی، انتخاب فضای اطراف نقاط تخمین با توجه به شکل کانسار و ساختارهای زمین‌شناسی اهمیت فراوانی دارد. از آن‌جا که اغلب فضای اطراف این نقاط از نوعی ناهمسانگردی برخوردارند، فضای نقاط مورد استفاده برای تخمین، به صورت بیضوی‌هایی، تحت عنوان بیضوی‌های ناهمسانگردی تعریف می‌شوند. با توجه به سه‌بعدی بودن اطلاعات مورد استفاده، تعیین این فضاها با روش بررسی منحنی‌های تغییرنما در جهات و روندهای سه‌بعدی برای این که در نهایت بتوان بیضوی ناهمسانگردی اطراف این نقاط را تعیین کرد، کار پیچیده‌ای است. برای رفع این مشکل، با استفاده از روش رسم ابرهای کوواریانس براساس همبستگی فضایی زوج نمونه‌ها در فواصل مختلف در فضا، ماتریس کوواریانس برای بررسی نحوه‌ی همبستگی داده‌ها در ابعاد سه‌بعدی ساخته می‌شود. به کمک این ماتریس، ویژه بردارها تعریف می‌شوند تا روندهای غالب پیوستگی در داخل کانسار به دست آید. با رسم منحنی تغییرنما در این جهت‌ها و تعیین مشخصات آن‌ها، فواصل مورد نیاز در جهات مختلف بیضوی ناهمسانگردی به دست می‌آید. در این مقاله پس از تشریح روش، یک مثال کاربردی در مورد بلوک یک آنومالی شماره 6 خشومی آورده شده است.}, keywords_fa = {منحنی تغییر نما,بیضوی ناهمسانگردی,ابرهای کوواریانس,ویژه بردارها}, url = {https://jonsat.nstri.ir/article_480.html}, eprint = {https://jonsat.nstri.ir/article_480_f3cf16bf37102000b4d65939f53ea8b9.pdf} } @article { author = {Akhavan, A and Sheikh, N and Beteshobabrud, R}, title = {Polymethylmethacrylate/Silver Nanocomposite Prepared by γ-Ray}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {30}, number = {4}, pages = {80-84}, year = {2010}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Polymethylmethacrylate-silver (PMMA/Ag) nanocomposite is synthesized by irradiating the solution of silver ions in methylmethacrylate monomer by γ-ray. In this method, polymerization of the methylmethacrylate monomer and the silver ion reduction occurred simultaneously. Optical properties of the PMMA/Ag solutions are investigated using UV-Vis spectroscopy. The structural characterizations of the PMMA/Ag nanocomposite are determined by FTIR spectroscopy XRD, and SEM measurements. The SEM image shows that the Ag nanoparticles disperse in the PMMA matrix with a relatively uniform distribution. The antibacterial studies show that the PMMA/Ag nanocomposite is antibacterial against E. coli, as a model for gram-negative bacteria.}, keywords = {Polymethylmethacrylate,Silver,Nanocomposite,γ-Ray}, title_fa = {Polymethylmethacrylate/Silver Nanocomposite Prepared by γ-Ray}, abstract_fa = {Polymethylmethacrylate-silver (PMMA/Ag) nanocomposite is synthesized by irradiating the solution of silver ions in methylmethacrylate monomer by γ-ray. In this method, polymerization of the methylmethacrylate monomer and the silver ion reduction occurred simultaneously. Optical properties of the PMMA/Ag solutions are investigated using UV-Vis spectroscopy. The structural characterizations of the PMMA/Ag nanocomposite are determined by FTIR spectroscopy XRD, and SEM measurements. The SEM image shows that the Ag nanoparticles disperse in the PMMA matrix with a relatively uniform distribution. The antibacterial studies show that the PMMA/Ag nanocomposite is antibacterial against E. coli, as a model for gram-negative bacteria.}, keywords_fa = {Polymethylmethacrylate,Silver,Nanocomposite,γ-Ray}, url = {https://jonsat.nstri.ir/article_481.html}, eprint = {https://jonsat.nstri.ir/article_481_7abdb2cbdf0d988336173be27bfacd87.pdf} }