@article { author = {Jabbari, I and Shahriari, M and Aghamiri, S.M.R and Monadi, SH}, title = {Introducing a Method to Derive a Multiple Virtual Point Source Model of Linac for Photon Beam Dose Calculation Using Monte Carlo Method}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {32}, number = {3}, pages = {29-35}, year = {2011}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {In this study a new simple but a very effective method is introduced for the beam modeling of the invariant part of a medical linear accelerator. In this method, instead of segmentation of scoring plane and analysis of phase space file, the mirror image of a virtual point source, energy and angular distributions and dependencies between them are derived, directly. Then, the method was used for the beam modeling of a 6MeV photon beam of the Siemens ONCOR Impression accelerator, where the TALLYX capability of MCNP4C was used. Consequently, a multiple point source model with angular dependent photon energy spectra was obtained. Then, the percentage depth dose curves and the lateral dose distributions in water phantom were calculated using the present model for three field sizes including 4cm×4cm, 10cm×10cm and 40cm×40cm, and the results were compared to those of full Monte Carlo simulations. The results showed excellent agreement between them for all the field sizes. The benefits ofthe present method were verified as comparedwiththephasespacefileanalysismethod,including the easeofapplicationand the errors removal caused by the spatial segmentation of the phase space data.}, keywords = {Monte Carlo Simulation,MCNP,Photon Beam Modeling,Medical Linear Accelerator}, title_fa = {ارایه‌ی روشی مناسب برای مدل‌سازی چشمه‌ی مجازی چند نقطه‌ای شتاب‌دهنده‌ی خطی پزشکی در محاسبات دز فوتون به روش مونت‌کارلو}, abstract_fa = {در این تحقیق روشی جدید و ساده اما مؤثر برای مدل‌سازی بخش ثابت سر شتاب­دهنده­ی پزشکی ارایه شده است. در این روش به جای تقسیم­بندی مکانی و تجزیه و تحلیل اطلاعات فضای فاز ذخیره شده، تصویر آینه‌ای چشمه‌های مجازی نقطه‌ای، توزیع انرژی و زاویه‌ای فوتون‌ها و وابستگی آن­ها به یک­دیگر مستقیماً به دست می‌آید. این روش برای مدل­سازی باریکه­ی فوتونی MeV6 شتاب­دهنده­ی زیمنس (مدل ONCOR Impression) به کار گرفته شد و برای اجرای آن از قابلیت TALLYX کد MCNP4C استفاده گردید. در نتیجه مدل چشمه­ی چندنقطه‌ای با توزیع انرژی وابسته به زاویه به دست آمد. سپس با استفاده از مدل مجازی چشمه­ی به دست آمده، منحنی‌های درصد دز عمقی و توزیع‌های عرضی دز در فانتوم آب برای میدان‌های تابشی cm4×cm4، cm10×cm10 و cm40×cm40 محاسبه و نتایج حاصله با نتایج به دست آمده از شبیه‌سازی کامل مونت­کارلو، مقایسه شد. این، نشان داد که توافق بسیار خوبی بین این دو در تمام ابعاد میدان تابشی وجود دارد. از مزایای این روش در مقایسه با روش تجزیه و تحلیل اطلاعات فضای فاز، سهولت کاربرد و حذف خطای ناشی از ابعاد تقسیم­بندی مکانی اطلاعات فضای فاز است.}, keywords_fa = {شبیه‌سازی مونت‌کارلو,MCNP,مدل‌سازی چشمه فوتون,شتاب‌دهنده‌ی خطی پزشکی}, url = {https://jonsat.nstri.ir/article_409.html}, eprint = {https://jonsat.nstri.ir/article_409_28f71cad69c979e1beaacb3e5836cd67.pdf} }