پژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187138220170823Period and Field Intensity Errors and their Effects on the Undulator Synchrotron Radiation: an Investigation for the National Synchrotron Undulatorخطای پریود و خطای شدت میدان و تأثیر آنها بر تابش سینکروترونی آندولاتور: ارزیابی آن در مورد آندولاتور سینکروترون ملی19152FAعلیرمضانی مقدمپژوهشکدهی فیزیک و شتابگرها، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمیمحمدلامعیپژوهشکدهی فیزیک و شتابگرها، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمیجوادرحیقیپژوهشگاه دانشهای بنیادی، طرح چشمه نور ایرانامیرچخماچی دومپژوهشکدهی گداخت، پژوهشگاه علوم و فنون هستهایJournal Article20160608The first prototype Iranian undulator is under design and fabrication. The undulator makes a periodic magnetic field which forces the electrons travelling through it to move along the undulator with a sinusoidal motion and radiate synchrotron radiation with specific properties. In this paper, two classes of errors, which are important to consider in the design and fabrication of undulators, so to speak, the period error and field error are introduced. Additionally, their effects on the radiation harmonics were studied. For this purpose, MATLAB software was used to generate pseudo-random errors for the undulator periods and peak fields. Then, the fields were applied to a pure sinusoidal magnetic field, used for calculation of the final harmonics by the B2E code. It was found that with the increase of the number of harmonics, the effects of errors are enhamced. Also, it was found that the effect of the field error is higher than that of the phase error. Finally, it could be concluded that in order to reach %90 of the ideal intensity at the first and third harmonics, the desired errors at the peak field and the period must be less than %0.1 and 3 degree, respectively. Also, the tolerance for the gap value must be no more than 15±0.2 mm.طراحی و ساخت نمونهی آزمایشگاهی آندولاتور برای اولین بار در کشور در حال انجام است. آندولاتور، با تولید میدان مغناطیسی با تناوب مکانی و شدت مناسب، سبب حرکت سینوسی الکترونهایی میشود که در راستای محور آن حرکت میکنند و در نتیجه تابش سینکروترونی با ویژگیهای خاص تولید میکند. در این مقاله، ابتدا خطای پریود و خطای شدت میدان معرفی، و سپس تأثیر آنها بر خواص هارمونیکهای تابش سینکروترونی ارزیابی میشوند. خطاهای کاتورهای پریود با استفاده از نرمافزار متلب، و شدت میدان تولید شده و به کار رفته بر میدان یک آندولاتور ایدهآل و تأثیر آنها بر شدت قلهها به کمک کد B2E مطالعه شده است. نتایج نشان میدهند با افزایش هارمونیکها، تأثیر خطاها به طور قابل توجهی بیشتر میشوند. همچنین به طور کلی میتوان دریافت که تأثیر خطای شدت میدان از تأثیر خطای پریود میدان بیشتر است. نتایج محاسبات نشان میدهد برای رسیدن به شدت بالای 90% در هارمونیکهای اول و سوم تابشی، میزان مجاز در خطای شدت میدان و پریود باید به ترتیب کمتر از 1% و 3 درجه، و میزان خطای در اندازهی شکاف نباید از mm 15±0.2 بیشتر باشد.https://jonsat.nstri.ir/article_152_24a80546c19d18943c3fae334a2f4e4f.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187138220170823Experimental Study of the Anode Geometry and Insulator Material-Length Effect on Ion Beam Intensity in a Mather Type Plasma Focus Deviceمطالعهی تجربی اثر هندسهی آند و جنس- طول عایق دستگاه پلاسمای کانونی نوع مَدر بر شدت باریکهی یون نیتروژن1017153FAمرتضیحبیبیدانشکدهی مهندسی انرژی و فیزیک، دانشگاه صنعتی امیرکبیرJournal Article20160611In this paper, the effect of the anode electrode geometry with different insulator sleeve lengths and materials on the ion beam emitted from a 3 kJ plasma focus device is studied. Two Pyrex and Quartz insulators with different lengths and two anode tip geometries, i.e. cylindrical and conic, are used. Ion beam intensity in 12 kV charging voltage and conic anode with the 50 mm Pyrex insulator was increased by a factor of 1.11. Optimum length of the Pyrex insulator related to the maximum ion beam intensity varied with the anode geometry and increased from 45 mm to 50 mm, when we replaced the cylindrical anode with the conic one in 12 kV applied voltage. Under the same working condition, the conic anode tip tended to have more ion beam intensity in comparison with the conventional cylindrical flat geometry.در این مقاله، اثر هندسهی الکترود آند با طول و جنسهای مختلف پوشش عایق بر شدت باریکهی یون نیتروژن در یک دستگاه پلاسمای کانونی kJ3 مطالعه شده است. از دو جنس عایق پیرکس و کوارتز با طولهای مختلف و دو هندسهی استوانهای و مخروطی آند استفاده شد. شدت یونها در ولتاژ kV 12 و آند مخروطی با عایق به طول mm 50 از جنس پیرکس نسبت به عایق کوارتز، ضریب افزایشی 1.11 را نشان میدهد. طول بهینهی متناظر با بیشترین شدت باریکهی یون در عایق پیرکس، با تغییر هندسهی آند تغییر میکند و در این ولتاژ از مقدار بهینهی mm 45 در آند استوانهای به طول mm 50 در آند مخروطی افزایش یافته است. در شرایط کاری یکسان، آند مخروطی نسبت به آند استوانهای شدت یون بیشتری را به دست میدهد.https://jonsat.nstri.ir/article_153_4670553170ecc2f87b8d971ad83845fb.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187138220170823Prompt Neutron Decay Constant in Esfahan Light Water Subcritical Reactor (ELWSCR): Comparison of Rossi-α Experiment and Monte Carlo Simulationثابت واپاشی نوترون آنی در قلب راکتور زیربحرانی آبسبک اصفهان: مقایسهی آزمایش رُسی- آلفا و شبیهسازی مونتهکارلو1824154FAمحمدارکانیپژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمیحسینخلفیپژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمیصمدخاکشورنیاپژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمیناصروثوقیدانشکدهی مهندسی انرژی، دانشگاه صنعتی شریفJournal Article20160503Rossi-α method is one of the useful techniques for diagnosis of subcritical nuclear reactors. In the present work, Rossi- α method was used to measure the prompt neutron decay constant of the reactor core of the Esfahan Light Water Subcritical Reactor (ELWSCR), and to drive the neutron chain reactions, a <sup>252</sup>Cf neutron source was used. The experimental data in the form of the arrival time of the stochastic pulses were collected by a dedicated data acquisition system, and the required data were stored in a PC. Offline processing of the data was performed by the MATLAB software engineering tool, and Rossi distribution was extracted. Finally, by the curve fitting of Rossi distribution function to the processed data, the prompt neutron decay constant of the core was determined. Based on MCNPX code simulation, the reactor core was also studied. A comparison of the results obtained by the two methods shows a fairly good agreement.یکی از روشهای سودمند برای شناسایی سامانههای زیربحرانی، روش رُسی- آلفا است. در این پژوهش، این روش برای اندازهگیری ثابت واپاشی نوترون آنی در قلب راکتور زیربحرانی آب سبک اصفهان بهکار گرفته شده است. برای راهاندازی شکافت زنجیرهای در این سامانه، از یک چشمهی <sup>25</sup>2Cf استفاده، و دادههای تجربی به صورت زمان ورود پالسهای تصادفی از طریق سامانهای اختصاصی جمعآوری، و بر روی کامپیوتر ذخیره شد. سپس این دادهها به صورت ناهمزمان در محیط نرمافزار مهندسی متلب پردازش، و توزیع رُسی- آلفا استخراج شد. در پایان، با برازش رابطهی منتسب بر توزیع رُسی- آلفا، پارامتر ثابت واپاشی نوترون آنی استخراج شد. قلب راکتور زیربحرانی آبسبک اصفهان از طریق شبیهسازی نیز با استفاده از کد MCNPX مطالعه شد. مقایسهی نتایج به دست آمده از هر دو روش فوق تطابق نسبتاً خوبی را نشان میدهند.https://jonsat.nstri.ir/article_154_277c231ab30c62113a3e2e7f9cd600a4.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187138220170823Production and Quality Control of Indium-111 Pentetreotide Radiopharmaceutical in Iranتولید و کنترل کیفی رادیوداروی 111Inپنتتروتاید در ایران2534155FAسید یوسففضائلی حسینینژادپژوهشکدهی کاربرد پرتوها، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمیمصطفیعرفانیپژوهشکدهی کاربرد پرتوها، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمیJournal Article20160425<sup>111</sup>In pentetreotide (OctreoScan<sup>TM</sup>) radiopharmaceutical is used extensively for the detection of a variety of cancers in medicine. Octerotide is a pharmaceutical with a structure similar to somatostatin which is administrated via intravenous injection in an <sup>111</sup>In labeled form. This radiopharmaceutical acts as a theranostic agent with binding to somatostatin receptors. Over the last decade,<sup> 111</sup>In pentetreotide has remained the most widely used radiopharmaceutical for the scintigraphic detection and staging of primary and metastatic neuroendocrine tumors. In this study, application of this radiopharmaceutical as well as the production and quality control strategies was investigated precisely. Briefly, the labeling yield of <sup>111</sup>In pentetreotide was determined before the administration to the rodents. The incorporation of the radionuclide was measured by RTLC and the radiochemical purity was measured by HPLC. Due to the high thermodynamic stability constants for DTPA and In<sup>3+</sup>, the formation yield of <sup>111</sup>In pentetreotide under the terms applied in this study was found to be high.رادیوداروی <sup>111</sup>In- پنتتروتاید (اُکترواسکن) هماکنون به صورت گسترده در تشخیص انواع سرطانها در علم پزشکی کاربرد دارد. اکتروتاید دارویی با ساختاری مشابه سوماتواستاتین است که در حالت نشاندار شده با هستهی پرتوزای <sup>111</sup>In به صورت وریدی تزریق میشود. این رادیودارو با اتصال به گیرندههای سوماتواستاتین به شکل یک عامل ترانوستیک عمل<br /> میکند. در دههی اخیر <sup>111</sup>Inپنتتروتاید به عنوان داروی تشخیص سینتیگرافی و تعیین پیشرفت تومورهای اولیه و متاستاتیک نورواندوکراین بیشترین مصرف را داشته است. در این مطالعه، کاربردهای این رادیودارو به همراه استراتژیهای تولید و کنترل کیفی به طور دقیق بررسی شد. به طور خلاصه، بهرهی نشاندارسازی <sup>111</sup>In- پنتتروتاید قبل از استفاده بر روی حیوانات جونده محاسبه شد. اتصال هستهی پرتوزای با تکنیک RTLC و خلوص رادیوشیمیایی با تکنیک HPLC اندازهگیری شد. به سبب بالا بودن ثابت پایداری ترمودینامیکی DTPA و <sup>3+</sup>In، بهرهی تشکیل <sup>111</sup>In- پنتتروتاید تحت شرایط به کار رفته در این پژوهش بالا بود.https://jonsat.nstri.ir/article_155_f92d1a88b7a003ff769682e6918283d6.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187138220170823Removing Aromatic Organic Compounds of Phenol and Furfural from Petroleum Refinery Wastewater Using Electron Beamsحذف ترکیبات آلی آروماتیک فنول و فورفورال موجود در پساب پالایشگاه نفت با استفاده از باریکهی الکترونی3543156FAمسعودکازرانینژاددانشکدهی شیمی، دانشگاه زنجانناصردلالیدانشکدهی شیمی، دانشگاه زنجاناعظماخوانپژوهشکدهی کاربرد پرتوها، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی0000-0001-9769-7761Journal Article20160730In this study, phenol and furfural removals from the standard solutions and petroleum refineries wastewater by electron beams have been investigated. The standard solutions of phenol and furfural were irradiated in the range of 1-10kGy and their concentrations were determined before and after irradiation by UV-VIS spectrophotometer. The effects of the experimental parameters including the amounts of the absorbed doses, pH variation, initial concentration of the organic compound and the salt effect were studied. The results of pH in the range of 3-11 showed that the removal of phenol and furfural was remarkably facilitated in the acidic condition. Studies showed that, at the dose of 6kGy, the removal percentages of phenol and furfural in the lower concentration of 20 and 100 mg/l respectively were more than 99%. However, by increasing the concentration, the amount of the removal gradually decreased. Also, investigation of the salt effect on the removal of these compounds within the range of 0.5-30% w/v concentration showed that at the dose of 6kGy, the presence of salt has no significant effect on the removal of phenol and furfural. Finally, the results of petroleum refinery wastewater irradiation in the optimum condition, obtained from the experiments, indicated that the removal percentages of phenol and furfural were more than 95%.در این پژوهش، حذف فنول و فورفورال در محلولهای استاندارد و پساب پالایشگاه نفت با استفاده از باریکهی الکترونی بررسی شده است. محلولهای استاندارد فنول و فورفورال در محدودهی 1 تا kGy 10 تحت تابش الکترونی قرار گرفته، و غلظت آنها قبل و بعد از تابشدهی، با دستگاه اسپکتروفتومتری UV-VIS اندازهگیری شد. تأثیر پارامترهای تجربی از قبیل مقدار دز جذب شده، تغییرات pH، غلظت اولیهی ترکیب آلی و اثر نمک در حذف این ترکیبات بررسی شد. نتایج حاصل از تغییرات pH در گسترهی 3 تا 11 نشان داد که حذف فنول و فورفورال به طور قابل توجهی در شرایط اسیدی افزایش مییابد. براساس مشاهدات، در دز kGy 6 درصد حذف فنول و فورفورال به ترتیب در غلظتهای کمتر از 20 و mg/l 100 بیشتر از 99% است، در حالی که در غلظتهای بیشتر، مقادیر حذف به تدریج کاهش مییابند. همچنین بررسی اثر نمک در میزان حذف این ترکیبات در گسترهی غلظتی 0.5 تا 30% وزنی/ حجمی نشان داد که حضور نمک تأثیر معنیداری بر روی حذف فنول و فورفورال در دز kGy 6 ندارد. در نهایت نتایج حاصل از تابشدهی پساب پالایشگاه نفت در شرایط بهینهی آزمایشها نشان داد که درصد حذف فنول و فورفورال در این نمونه بیش از 95% است.https://jonsat.nstri.ir/article_156_a6aa7bcf1426e50481e5e2e6892963a0.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187138220170823The Modelling Investigation of Wiikit Ore as Radioactive Waste Matrices by Studying Behavior of its U and Th Atomsبررسی مدلسازی سنگ معدن wiikit به صورت ماتریکس پسماند پرتوزا با مطالعهی رفتار اتمهای U و Th در آن4452157FAمحمدحسینپور خانمیریدانشکدهی رادیوشیمی، مرکز مندلیف، دانشگاه دولتی سن پترزبورگJournal Article20160726This research is dedicated to modeling the wiikit uranium ore for HLW radioactive waste storing. At first, during X-ray Crystallography it was determined that wiikit has metamict structure. Then SEM revealed the U phase and different mineral phases that could be regarded as a reason for being amorphous. EMP was used to determine the chemical composition of the sample showing that wiikit contains 4% of uranium. The radioactive elements U and Th were separated by ion exchange chromatography using Dowex АВ-17-8 anion exchanger. During the next stage, the U and Th sources were prepared by molecular plating. Alpha-spectroscopy of the U and Th sources revealed high deficit in <sup>234</sup>U/<sup>238</sup>U activity ratios, which violates secular equilibrium in the series of <sup>238</sup>U decay. Finally, according to the results obtained by the behavior analysis of the U and Th atoms in this wiikit, modeling of the wiikit as <sup>237</sup>Np, <sup>239</sup>Pu, <sup>241</sup>Am, <sup>242</sup>Cm, <sup>244</sup>Cm radioactive waste matrices and other heavy radioisotopes was performed when neutral oxides such as Al<sub>2</sub>O<sub>3</sub>,SiO<sub>2</sub>, Fe<sub>2</sub>O<sub>3</sub> were added.در این پژوهش، مدلسازی سنگ معدن اورانیم wiikit به منظور ذخیرهی پسماند پرتوزای HLW بررسی شد. ابتدا با استفاده از روش بلورشناسی پرتو ایکس مشخص شد که wiikit ساختار متامیکت دارد. همچنین، روشSEM نشان داد نمونه شامل فاز U و فازهای مختلف معدنی است که خود دلیل بر ساختار بیشکل سنگ معدن است. به منظور تعیین ترکیب شیمیایی نمونه، روش EMP استفاده شد که حاکی از وجود 4% U در نمونه است. با بهرهگیری از کروماتوگرافی تبادل یونی به وسیلهی مبادلهکنندههای آنیونی 8-17Dowex АВ-، عناصر پرتوزای Uو Th جداسازی و تخلیص شدند. سپس با آبکاری مولکولی، چشمههای U و Th تهیه شد و طیفنگاری آلفای چشمههای U و Th کاهش قابل توجهی را در نسبت پرتوزایی <sup>238</sup>U/<sup>243</sup>U نشان داد که ناقض تعادل پایدار در سری پرتوزایی <sup>238</sup>U است. در نهایت، براساس اطلاعات به دست آمده از رفتار اتمهای U و Th در این نوع wiikit، این نتیجه حاصل شد که مدل شدن wiikit به صورت ماتریکس پسماندهای پرتوزای <sup>239</sup>Pu، <sup>241</sup>Am، <sup>242</sup>Cm،<sup>244</sup>Cm و <sup>237</sup>Np سایر رادیوایزوتوپهای سنگین، مشروط به افزودن اکسیدهای خنثی مثل SiO<sub>2</sub>، Al<sub>2</sub>O<sub>3</sub> و Fe<sub>2</sub>O<sub>3</sub> است.https://jonsat.nstri.ir/article_157_0be387d58e918e253a74a73a86f9ab96.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187138220170823Investigation of the Process Parameters and Breakthrough Modeling of Thorium Biosorption on Orange Peel in a Fixed-Bed Columnبررسی پارامترهای فرایندی و مدلسازی نمودارهای شکست جذب زیستی توریم در یک ستون بستر ثابت با جاذب پوست پرتقال5363158FAعلی اصغرقربانپور خمسهپژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانسیناپوریاندانشکدهی مهندسی شیمی، پردیس دانشکدههای فنی، دانشگاه تهرانسهرابعلیقربانیاندانشکدهی مهندسی شیمی، پردیس دانشکدههای فنی، دانشگاه تهرانJournal Article20160712The aim of this research work is the investigation of process parameters and breakthrough modeling of thorium biosorption on orange peel in a fixed-bed column. For this purpose, a number of experiments have been performed on the surbents with diameters (0.4–2 mm), flow rates (1.5-6 mL/min), bed heights (4-8 cm) and feed inlet concentration (30-90 mg/L) at 25˚C and optimized pH of 3.8. The highest sorption capacity of 87.7 mg/g, occurred for the sorbents with 0.4-0.8 mm in diameter. The breakthrough point decreased with decreasing the bed height, increasing feed inlet concentration and increasing flow rate. Meanwhile, the sorption capacity increased with decreasing the bed height and flow rate. The experimental results were fitted by Thomas, Yan and Modified Dose-Response (MDR) models. Based on the experimental outcomes, the Yan and MDR models showed better results in comparison with the Thomas model. The XRF analysis results and calcium and potassium concentrations in the outlet stream of the bed showed that the ion exchange mechanism of the thorium biosorption by the orange peel sorbent is superior.هدف از این پژوهش، بررسی پارامترهای فرایندی و مدلسازی نمودارهای شکست جذب زیستی فلز سنگین توریم با جاذب پوست پرتقال از محلولهای آبی در حالت جریان پیوستهی ستون در یک بستر ثابت است. برای این منظور، آزمایشهایی با اندازهی ذرات جاذب (0.4 تا mm2)، نرخ جریان (1.5 تا mL/min6)، ارتفاع بستر (4 تا cm8) و غلظت اولیهی فلز (30 تا mg/L90) در pH بهینهی 3.8 و دمای C˚25 بررسی شده است. جاذب با اندازهی ذرات 0.4 تا mm0.8 بیشترین ظرفیت جذب ستونی به میزان mg/g87.7 داشت. مشاهده شد که با کاهش ارتفاع، افزایش غلظت ورودی و افزایش نرخ جریان، نقطهی شکست نمودار کاهش مییابد. همچنین با کاهش اندازهی ذرات جاذب و نرخ جریان محلول ورودی به ستون، ظرفیت جذب ستون افزایش مییابد. نتایج آزمایشگاهی به کمک مدلهای توماس، یان و مدل مقدار - پاسخ اصلاح شده (MDR) برازش شد. با توجه به نتایج به دست آمده میتوان گفت مدلهای یان و MDR تطابق بهتری با نتایج تجربی دارند. نتایج آنالیز XRF و غلظت یونهای کلسیم و پتاسیم در محلول خروجی از ستون نشان دادند که تبادل یون برای جذب توریم روی جاذب پوست پرتقال، سازوکار غالب است.https://jonsat.nstri.ir/article_158_bbefbbf432eedac3c1d6b7c0af38ff9c.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187138220170823Adsorption of Th(IV) From Aqueous Solutions Using Bi-Functionalized
Algae-Yeast Biosorbentجذب توریم (IV) از محلولهای آبی با استفاده از زیستجاذب زوج عاملدار شده با جلبک و مخمر6480159FAسعیدعلمدار میلانیپژوهشکدهی چرخه سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانمحمدکریمیدانشکدهی مهندسی شیمی، پردیس دانشکدههای فنی، دانشگاه تهرانبهزادمراغه میانجیپژوهشکدهی چرخه سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانJournal Article20160502Immobilized Cystoseira indica algae and Saccharomyces Cerevisiae on the silica gel were used for the biosorption of Th(IV) from aqueous solutions. Ability and capacity of bi-functionalized algae-yeast biosorbent for adsorption of thorium(IV) from aqueous solutions were investigated in a batch method. The response surface methodology (RSM) based on the central composite design (CCD) was used to investigate the effect of pH (2-6), time (10-180 min), initial thorium(IV) concentration (50-300 mg/l) and adsorbent dosage (0.5-5 g/l) on the sorption of thorium(IV) from aqueous solutions, and to optimize the biosorption of Th(IV). Variance analysis showed that the adsorbent dosage, initial Th(IV) concentration, time and pH were respectively, the most effective factors in the biosorption of thorium(IV). Under optimal conditions (pH 5, contact time 137.5 min, initial Th(IV) concentration 237.5 mg/l, and adsorbent dosage 1.63 g/l) the capacity of the biosorbent for Th(IV) was estimated to be 128.82 mg/g. The kinetic data were fitted well the pseudo-second-order rate equation. The biosorption data could be well described by Langmuir isotherm in comparison to Freundlich and Temkin isotherms. The maximum sorption capacity of the biosorbent for Th(IV), by Langmuir isotherm was estimated to be 142.86 mg/g. The thermodynamic parameters indicated that the biosorption of Th(IV) on the biomass was a spontaneous, and endothermic process, at the studied temperatures and would occur via physical adsorption.با تثبیت جلبک سیستوسریاایندیکا و مخمرنان ساکارومایسز سرویسیا در سیلیکاژل، یک زیستجاذب دوعاملی برای جذب یونهای توریم(IV) از محلولهای آبی فراهم شد. توانایی و ظرفیت جذب این زیستجاذب دوعاملی برای جذب توریم(IV) از محلولهای آبی در روش ناپیوسته ارزیابی شد. با استفاده از روش سطح پاسخ بر پایهی طرح مرکب مرکزی، تأثیر متغیرهای فرایندی pH (2 تا 6)، زمان (10تا min 180)، غلظت اولیهی محلول توریم(IV) (50 تاmg/l 300) و مقدار جاذب (0.5 تا g/l 5) بر جذب زیستی توریم(IV) از <br />محیطهای آبی بررسی، و فرایند جذب بهینهسازی شد. تحلیل واریانس نشان داد که مقادیر جاذب، غلظت اولیهی محلول توریم(IV)، زمان و pH به ترتیب، مؤثرترین عوامل در جذب زیستی توریم(IV) هستند. تحت شرایط بهینه (pH برابر با 5، زمان تماس min 137.5، غلظت اولیهی g/l 237.5 محلول توریم(IV) و مقدار <br /> جاذب g/l1.63) میزان جذب mg/g 128.82 براورد شد. دادههای سینتیکی با معادلهی سینتیکی درجهی دوم به خوبی برازش شدند. دادههای جذب نیز با همدمای لانگمویر در مقایسه با همدمای فروندلیچ و تمکین بهتر توصیف شدند. ظرفیت بیشینهی زیستجاذب برای جذب توریم(IV) با همدمای لانگمویر برابر mg/g 142.86 براورد شد. مقادیر <br />محاسبهشدهی پارامترهای ترمودینامیکی نشان داد که فرایند جذب توریم(IV) در شرایط کاری به کار گرفته شده، خودبهخودی و گرماگیر بوده است و سازوکار فیزیکی دارد.https://jonsat.nstri.ir/article_159_41c5fb148011901c00791efef100a962.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187138220170823Purification of LiF Powder by Zone Melting Methodتخلیص پودر فلورید لیتیم به روش ذوب منطقهای8188160FAراحلهخطیریپژوهشکدهی فوتونیک و فناوریهای کوانتومی، پزوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانحیدرفریپورپژوهشکدهی فوتونیک و فناوریهای کوانتومی، پزوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانحسینکلباسیپژوهشکدهی فوتونیک و فناوریهای کوانتومی، پزوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانمجتبیاسماعیلنیاپژوهشکدهی فوتونیک و فناوریهای کوانتومی، پزوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانزهرادرریزپژوهشکدهی فوتونیک و فناوریهای کوانتومی، پزوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانبهزادارحامیپژوهشکدهی فوتونیک و فناوریهای کوانتومی، پزوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایراننورالهعلی اکبریپژوهشکدهی فوتونیک و فناوریهای کوانتومی، پزوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایراناسماعیلجنگجوپژوهشکدهی فوتونیک و فناوریهای کوانتومی، پزوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانJournal Article20160712In order to achieve high quality crystals, it is necessary to purify the raw material. In the present experimental study, the zone melting method was used to purify Lithium Flouride powder. A small amount of melt moves slowly from the solid area in order to remove impurities in the frozen solid. In this case, the number, size and length of the zone melting affect the final result, and cause the optimal distribution of solutes. At the beginning, the regional purification system was equipped. The mechanism of work was moving furnace on a graphic crucible with full of LiF powder by 20 mm/h<sup>-1</sup>. This procedure was followed in a vacuum for 7, 9 and 14 times. At last the amounts of impurities such as Fe, Ba were measured by ICP (Inductively Coupled Plasma) analysis before and after purification. <br /> به منظور دستیابی به بلورهایی با کیفیت بالاتر، استفاده از مواد اولیه با درجهی خلوص بالا، امری ضروری است که در این میان ذوب منطقهای یکی از روشهای دستیابی به این هدف است. در این روش، یک ناحیهی کوچک مذاب به آرامی در میان ناحیهی جامد حرکت میکند و ضمن عبور، سبب حذف ناخالصیها در طول مادهی منجمد، و یا توزیع مطلوب مواد حل شده در جامد میشود. تعداد، اندازه و طول مناطق ذوب نقش مؤثری در نتیجهی نهایی دارد. در این مقاله، ابتدا دستگاه خالصسازی منطقهای تجهیز شد، سپس کوره با سرعت mm/h<sup>-1</sup> 20 از پودر LiF که در بوتهی گرافیتی تحت خلأ قرار داشت، 7، 9 و 14 بار عبور داده، و پودر تخلیص شد. در نهایت میزان ناخالصیها از قبیل Fe، Ba قبل و بعد از خالصسازی منطقهای، با دستگاه آنالیز جفتشدگی القائی (ICP) بررسی شد.https://jonsat.nstri.ir/article_160_b74f451cf593e889be0b4e19573a0a7a.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187138220170823Comparison of White Spot Syndrome Virus Inactivation by Electron Irradiation and Formalin Treatmentمقایسهی غیرفعالسازی ویروس سندرم لکه سفید میگو به روش پرتوتابی الکترون و تیمار با فرمالین8994161FAفرحنازمعتمدی سدهپژوهشکدهی کشاورزی هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانمحمدافشارنسبموسسهی تحقیقات علوم شیلاتی ایرانمرضیهحیدریهموسسهی تحقیقات علوم شیلاتی ایرانJournal Article20160611White spot syndrome virus is a major pathogen in cultured penaeid shrimp industries. The virus not only is present in shrimp but also occurs in marine crustaceans. The infected shrimp samples were collected from south of Iran and the infection was confirmed by Nested PCR.WSSV was isolated from the infected samples by centrifugation and filtration and multiplied in crayfish by intramuscular inoculation. WSSV was purified from the infected crayfish haemolymph by sucrose gradient and ultracentrifuge, and then confirmed under electron Microscopy. In vivo virus titration was made in <em>Penaeus semiculcatus </em>in a period of 8-10 days,and calculated as LD<sub>50</sub>. WSSV was inactivated by the 10-MeV electron accelerator and formalin treatment. The LD<sub>50</sub> of the live virus and the irradiated virus samples were calculated by the Karber method. The dose survival curve for the irradiated and non-irradiated virus samples was drawn by Origin 6.1 software and D<sub>10</sub> Value factor was calculated according to the curve. In vivo titration of the live virus stock obtained was 10 <sup>5.4</sup> LD<sub>50</sub>/ ml and the optimum dose of the electron beam for inactivation of WSSV was obtained as 13 kGy. The inactivated, irradiated WSSV antigen can be used for the evaluation of shrimp immune response in the near future.ویروس سندرم لکه سفید یکی از عوامل بیماریزای مهم در صنعت پرورش میگو است. این ویروس نه تنها در میگو بلکه در سایر <br /> سختپوستان وجود دارد. نمونههای میگوی عفونی از جنوب ایران جمعآوری، و از نظر وجود ویروس سندرم لکه سفید با استفاده از آزمون <br /> Nested PCR بررسی شدند. ویروس از میگوهای عفونی شده به روش سانتریفوژ و فیلتراسیون جداسازی، و در بدن خرچنگ دراز تکثیر داده شد. این ویروس از همولنف خرچنگ عفونی به روش شیب غلظت سوکروز و اولتراسانتریفوژ خالصسازی، و از راه مشاهده با میکروسکوپ الکترونی تأیید شد. تیتراسیون ویروس (دز کشندهی 50%) در پست لاروهای یک گرمی میگو ببری سبز در دورهی 8 تا 10 روزه انجام شد. غیرفعالسازی ویروس به روش پرتوتابی با استفاده از شتابدهندهی الکترون با انرژی MeV10 و تیمار با فرمالین انجام شد. دز کشندهی 50% ویروس زنده و ویروسهای پرتوتابی شده به روش کربر محاسبه، منحنی دز/ پایندگی با استفاده از نرمافزار Origin6 ترسیم، و ارزش D<sub>10</sub> محاسبه شد. تیتر ویروس 10<sup>5/4</sup> دز کشندهی 50% در هر میلیلیتر،و دز بهینهی الکترون برای غیرفعالسازی این ویروس kGy 13 به دست آمد. این آنتیژن ویروسی پرتوتابی شده میتواند در آینده برای ارزیابی سیستم ایمنی میگو استفاده شود.https://jonsat.nstri.ir/article_161_38764cb467710f31bcb31328d8d9c350.pdf