پژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139120180522Evaluation of the Magnetized Magnitudes of the Flowing Nuclear Spins Using Solving Bloch Equations by Finite Difference Method in MRIارزیابی مقدار آهنرباییدهی اسپینهای هستهای جاری در تصویرگیری با استفاده از تشدید مغناطیسی (MRI) با حل معادلات بلوخ به روش تفاضل محدود1618710.24200/nst.2018.187FAسمانهبهرامیدانشکدهی مهندسی انرژی، دانشگاه صنعتی شریفمهردادبروشکیدانشکدهی مهندسی انرژی، دانشگاه صنعتی شریفمنصورعاشورپژوهشکدهی کاربرد پرتوها، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانJournal Article20171005The distribution of the magnetized magnitudes of the flowing nuclear spins has a key role to evaluate the radiofrequency pulses used in the magnetic resonance angiography (MRA). In this study, a finite difference method is used to solve Bloch equations for the flowing nuclear spins during and after a 90° rectangular selective pulse which is important for optimization of the pulse sequence. The results of the simulation indicate that the magnitudes are deformed due to the flowing nuclear spins, while their velocity is increased. The maximum variations are created on the transverse magnitudes namely, M<sub>x</sub> and M<sub>y</sub>. The symmetry on these profiles disappear by increasing the velocity. In contrast, no variation on the longitudinal magnitude namely M<sub>z</sub> is observed, except a shift on the velocity direction. The sensitivity of these profiles at low velocities for the rectangular selective pulse is more than that of the sinc type, which probably it may be used for characterizing the capillary space. In general, one may obtain the distribution of magnitudes for pulses with various flip angles, as well as, the combination of different pulses. The results may be employed to improve mapping indices in the MRA as well as assessment pulse sequences on the flowing nuclear spins.توزیع مقدار آهنرباییدهی اسپینهای هستهای جاری در ارزیابی تپهای بسامد رادیویی استفاده شده در آنژیوگرافی با استفاده از تشدید مغناطیسی هسته از اهمیت ویژهای برخوردار است. در این پژوهش توزیع مقدار اسپینهای هستهای جاری در زمان اعمال تپهای انتخابی برشی <br /> مستطیلیشکل و بعد از آن با حل معادلات بلوخ به روش تفاضل محدود، مورد بررسی قرار گرفته است. نتایج حاصل از شبیهسازی اعمال تپ انتخابی مستطیلی شکل 90 درجهای نشان میدهد که با افزایش سرعت جریان، مقادیر آهنرباییده، در اثر حرکت اسپینهای هستهای، تغییر شکل میدهد، و این تغییرات ناشی از چگونگی حرکت اسپینهای جاری است. بیشترین تغییر شکل در مقادیر عرضی یعنی، M<sub>x</sub> و M<sub>y</sub>ایجاد میشود. افزایش تندی جریان خون، تقارن در این نمایهها از بین میرود. در مقابل، در مقدار طولی یعنی، M<sub>z</sub> تغییر چندانی به جز یک تغییر جهت در راستای سرعت قابل مشاهده نیست. بهطور کلی با روش موجود میتوان توزیع مقادیر آهنرباییده را برای تپهایی با زاویههای تلنگر مختلف و همچنین ترکیب فازهای تپها به دست آورد که نتایج حاصل میتواند در بررسی بهبود مشخصههای تصویری نگاشتهای آنژیوگرافی با تشدید مغناطیسی و بررسی بیشتر تأثیر رشته تپهای طراحی شده بر روی اسیپینهای جاری مورد استفاده قرار گیرد.https://jonsat.nstri.ir/article_187_a593f337b129d613b942f209391ff1c5.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139120180522Calculation of Dose Distribution in Neutron Brachytherapy Using 252-Cf Source Through the Monte Carlo Simulation and Comparison with Experimental Dataمحاسبهی توزیع دز در براکیتراپی نوترونی با چشمهی 252Cf از طریق شبیهسازی مونتکارلو و مقایسه با دادههای تجربی71618810.24200/nst.2018.188FAغلامحسینایزدیوصفیگروه فیزیک، دانشگاه بیرجند، بیرجند ـ ایرانمحمدمهدیفیروزآبادیگروه فیزیک، دانشگاه بیرجند، بیرجند ـ ایرانایرججباریگروه مهندسی هستهای، دانشگاه اصفهان، اصفهان ـ ایرانJournal Article20161017Detailed recognition of dose distribution around the brachytherapy sources in order to create appropriate plans for treatment of cancer is very important. In this study, with calculation of the dosimetric parameters of clinical <sup>252</sup>Cf source based on TG-43U1 protocol and utilizing different tallies of dose calculation in MCNPX code [F4 (Fluence Tally), F6 (Kerma Tally) and *F8 (Dose Tally)], the dose rate at different directions and distances from the source center has been determined and compared with other experimental and simulation results. By comparing the results of this study with the experimental measurements and observing the good adaptation of the results, it was observed that the dose rate of clinical <sup>252</sup>Cf source has its largest value at the direction of longitudinal axis of the source, which is the reason for more expansion of radioactive material distribution in this direction, in comparsion with other directions and consequently higher neutron flux in this direction, based on the angular dependance of dose rate to geometric function according to TG-43 protocol. It was also found that the F4 and F6 tally results in neutron dosimetry calculations are more accurate than the *F8 tally results. The dosimetry calculations performed in this study has provided a preliminary dosimetry characterization of <sup>252</sup>Cf neutron sources for usage in treatment plans in the country.شناخت دقیق توزیع دز در اطراف چشمههای براکیتراپی به منظور ایجاد طرحهای درمانی مناسب برای درمان سرطان ضروری است. در این پژوهش، پارامترهای دزیمتری چشمهی بالینی Cf<sup>252</sup> براساس دستورکار 43<strong>-</strong>TG و بهرهگیری از تالیهای مختلفِ (4F، 6F و 8*F) محاسبهی دز در کد MCNPX، مقدار دز در زاویهها و فاصلههای مختلف از مرکز چشمه محاسبه و با دادههای تجربی و شبیهسازی دیگران مقایسه شد. با مقایسهی نتایج این پژوهش با دادههای تجربی و مشاهدهی انطباق خوب آنها مشخص شد که مقدار دز چشمهی بالینی Cf<sup>252 </sup>در راستای محور طولی چشمه دارای بیشینه مقدار خود است که با توجه به وابستگی زاویه<sub></sub>ای مقدار دز به تابع هندسی در دستورکار 43<strong>-</strong>TG، گستردگی بیشتر توزیع مواد پرتوزا در این راستا نسبت به راستاهای دیگر و در نتیجه بیشتر بودن مقدار شار نوترون در این راستا، دلیل این ازدیاد است. همچنین نتایج تالیهای 4F و 6F در محاسبات دزیمتری نوترون از نتایج تالی 8*Fدقیقتر و سرعت محاسبات بیشتر است. محاسبات دزیمتری در این پژوهش، مشخصهیابی دزیمتری مقدماتی چشمهی بالینی Cf<sup>252</sup> به منظور طراحی و کاربرد در طرحهای درمانی در کشور را فراهم نموده است.https://jonsat.nstri.ir/article_188_9168fd2e232a72abfc4afb75748e5c54.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139120180522Control Rods Reactivity Worth Measurement in a Mixed Core Heavy Water Zero Power Reactor (HWZPR)اندازهگیری مقدار رآکتیویتهی معادل میلههای کنترل در رآکتور صفر- قدرت آب سنگین (HWZPR) با سوخت ترکیبی172218910.24200/nst.2018.189FAپروینکاویانیپژوهشکدهی راکتور و ایمنی هستهای، پژوهشگاه علوم و فنون هستهایمحمدمشایخپژوهشکدهی راکتور و ایمنی هستهای، پژوهشگاه علوم و فنون هستهایجمشیدخورسندیپژوهشکدهی راکتور و ایمنی هستهای، پژوهشگاه علوم و فنون هستهایحسینخلفیپژوهشکدهی راکتور، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمیJournal Article20160614Systems related to reactivity control in a heavy water zero power reactor (HWZPR) consist of safety rod, control rod, emergency dump, and water level measurement and regulation systems. The control rod reactivity worth and safety rods should, therefore, meet the necessary safety criteria. The safety rods are used to shutdown the reactor through rapid falls in the emergency of the reactor and for a normal shutting down condition. According to the safety criteria, the equivalent rod reactivity worth must be appreciably greater than the maximum excess of reactivity which occurs in a reactor. The main applications of the control rods are to control the power rising period and the transition from subcritical to supercritical states. According to the safety guide for a HWZPR when a reactor is close to the critical state, the reactivity insertion rate should not exceed 2×10<sup>-4 </sup>(∆k/k)/s and the reactivity worth of each control rod should be less than 0.2% ∆k/k to ensure the safety of the reactor operation. According to the obtained calculational and experimental results, these conditions are satisfied for HWZPR. By changing the reactor fuel from natural metal uranium to mixed fuel (natural metal uranium fuel and natural oxide uranium), the control rod reactivity worth is measured and according to the obtained results, the control rod reactivity worth can meet the above provisions.میلههای کنترل و ایمنی، سیستم تخلیهی اضطراری آب سنگین، سیستم اندازهگیری سطح آب و سیستمهای مربوط به تنظیم توان رآکتور، سیستمهایی هستند که در رآکتور صفر- قدرت آب سنگین (HWZPR) برای کنترل رآکتیویته مورد استفاده قرار میگیرند. بنابراین مقدار رآکتیویتهی معادل میلههای کنترل و ایمنی باید معیارهای لازم برای ایمنی رآکتور را فراهم نمایند. کاربرد میلههای ایمنی، در خاموش کردن رآکتور به صورت معمول و نیز در هنگام بروز حادثه است. طبق معیارهای ایمنی بهرهبرداری از رآکتور، مقدار رآکتیویتهی معادل میلهها باید بیش از رآکتیویتهی مثبت اضافی ذاتی رآکتور باشد، در هنگام بروز حادثه سریعاً وارد قلب شده و رآکتیویتهی مثبت را جبران نماید. میلههای کنترل به منظور کنترل گذر از حالت زیربحرانی به حالت فوقبحرانی مورد استفاده قرار میگیرند. طبق راهنمای ایمنی رآکتور به منظور بهرهبرداری ایمن از رآکتور، در شرایط نزدیک به حالت بحرانی، آهنگ اعمال رآکتیویتهی مثبت نباید بیش از <sup>4-</sup>10×2 <span style="text-decoration: line-through;">s</span>(k/Δk)/s بوده و مقدار رآکتیویتهی معادل هر میلهی کنترل نیز باید کمتر از 0.2 درصد Δk/k باشد. طبق محاسبات و اندازهگیریهای انجام شده، این شرایط در رآکتور صفر- قدرت آب سنگین فراهم شده است. با تغییر سوخت رآکتور از فلزی به ترکیب فلزی و اکسید، مقدار رآکتیویتههای معادل میلههای کنترل اندازهگیری و طبق نتایج به دست آمده امکان برآورده شدن معیارهای ایمنی پیشگفته، در ترکیب سوخت جدید تأیید شد.https://jonsat.nstri.ir/article_189_543d7f7016856b18f8f8fd31b840d6d7.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139120180522Study of the Current Sheath Velocity in a 2.2 kJ Plasma Focus Deviceبررسی سرعت حرکت لایهی جریان در یک دستگاه پلاسمای کانونی با انرژی 2.2 کیلوژول232919010.24200/nst.2018.190FAمحمد امیر حمزهتفرشیپژوهشکدهی پلاسما و گداخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانداریوشرستمیفردپژوهشکدهی پلاسما و گداخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانعلینصیریپژوهشکدهی پلاسما و گداخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانJournal Article20161204In this article, after a brief introduction of <em>MTPF-1</em> plasma focus device, some of the related experimental data are presented. These data show that it is possible to select the proper gas pressure and discharge voltage in order to have a specified pinch time interval. In addition, the effects of gas pressure and discharge voltage on the current sheath’s mean velocity have also been studied. This study showed that, in the case of argon, the maximum value of the current sheath’s mean velocity is about 5 cm/µs, where it can be obtained under various combinations of the pressures and discharge voltages. By using the speed factor concept, the velocity of the current sheath at the pinch time was also examined. It was determined that in two separate experiments with different gas pressures and discharge voltages, the equality of the pinch times means the approximate equality of the current sheath radial velocities.این مقاله پس از معرفی اجمالی دستگاه پلاسمای کانونی 1-MTPF، نمونههایی از دادههای تجربی آن را ارایه میدهد. دادهها نشان میدهند که میتوان با انتخاب فشار گاز و ولتاژ تخلیهی مناسب، شرایطی را فراهم کرد تا تنگش پلاسما در محدودهی خاصی از زمان اتفاق بیفتد. علاوه براین، تأثیر فشار گاز و ولتاژ تخلیه بر سرعت متوسط حرکت لایهی جریان نیز مورد بررسی قرار گرفت که نشان داد که در صورت استفاده از گاز آرگون، بیشینهی سرعت متوسط حرکت لایهی جریان در حدود <sup>1-</sup>5cm µs است که میتواند با ترکیبهای مختلفی از فشار گاز و ولتاژ تخلیه به دست آید. با استفاده از مفهوم ضریب سرعت، سرعت حرکت لایهی جریان در لحظهی تنگش نیز مورد بررسی قرار گرفت و مشخص شد که در دو آزمایش مختلف با فشار گاز و ولتاژ تخلیهی متفاوت، یکسان بودن زمان تنگش حدوداً بیانگر یکسان بودن سرعت متوسط حرکت لایهی جریان است.https://jonsat.nstri.ir/article_190_82ec4f24b33c5d52c99d03597b94aff9.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139120180522Exploration of REE Using Radioactivity; Case Study: Baghak Mine, Sanganاکتشاف عناصر خاکی نادر با استفاده از پرتوزایی؛ مطالعه موردی: معدن باغک، سنگان304519110.24200/nst.2018.191FAسید سعیدقنادپورگروه اکتشاف، دانشکده مهندسی معدن و متالورژی، دانشگاه صنعتی امیرکبیرادشیرهزارخانیگروه اکتشاف، دانشکده مهندسی معدن و متالورژی، دانشگاه صنعتی امیرکبیرشاهیدنوریانگروه اکتشاف، شرکت اسکامعباسگلمحمدیدانشگاه جامع علمی کاربردی، مجتمع سنگ آهن سنگانJournal Article20170813In current study, sampling from Baghak mine in Sangan mines has been carried out based on radioactivity and radiation measurement method. In most projects that have been carried out in Iran for the uranium prospecting, especially in the central part of Iran, enrichment of rare earth elements (REEs) are known in keeping with uranium as a common feature. The association of these elements with U has caused to investigate their connections with other types of mineralizations. In fact the goal of this study is to survey the presence or absence of such a connection in a skarn mine which is a different case study from the central part of Iran. In case of their presence, this will lead to a new exploration method and sampling pattern for REEs. The results show that in addition to existence of this connection in some mineralizations of the Central Iran, an acceptable correlation is also observed between the REEs and radioactive elements in another iron skarn deposit. Finally, it can be explained that according to existence of such a connection between rare earth and radioactive elements in several different types of mineralizations, and based on the geochemical similarities, the need for more accurate studies is completely felt in order to introduce radiation measurement methods as effective approaches to explore REEs. The idea and the introduced method for the exploration of REEs in this study can provide a new viewpoint for the decision makers in this industry upon using further studies in this respect.با تکیه بر پرتوزایی و با کمک روش پرتوسنجی، نمونهبرداری از معدن باغک در معادن سنگان به انجام رسید. در اکثر موقعیتهای پیجویی اورانیم انجام شده در ایران، بهویژه در پهنهی ایران مرکزی، همراهی و غنیشدگی عناصر خاکی نادر از عوارض معمول شناخته شده است. مشاهدهی ارتباط بین عناصر خاکی نادر و پرتوزا سبب شده است که بررسی ارتباط آنها در انواع دیگری از کانیسازی نیز مدنظر قرار گیرد و در صورت وجود چنین ارتباطی، در اکتشاف این عناصر از خاصیت پرتوزایی بهره گرفته شود. در واقع هدف مطالعه، بررسی وجود یا عدم وجود چنین ارتباطی در یک معدن اسکارنی به عنوان یک مطالعهی موردی متفاوت با کانیسازیهای ایران مرکزی و در صورت وجود آن، ارایهی یک روش اکتشافی و الگوی نمونهبرداری بهینه برای کشف این عناصر است. یافتهها نشان میدهد که علاوه بر وجود چنین ارتباطی در برخی کانیسازیهای مربوط به ایران مرکزی، ارتباط و همبستگی بسیار قابل قبولی بین این عناصر در یک معدن دیگر با کانیسازی نوع آهن- اسکارن در سنگان نیز وجود دارد. در نهایت میتوان اذعان داشت که با توجه به مشاهدهی چنین ارتباطی بین این دو دسته از عناصر در چندین کانیسازی متفاوت و وجود شباهتهایی از نظر ژئوشیمی، ضرورت مطالعهی بیشتر و دقیقتر در آن به منظور معرفی روشهای پرتوسنجی به عنوان روشهایی مؤثر در اکتشاف عناصر خاکی نادر، کاملاً احساس میشود. فکر و روش معرفی شده در این پژوهش برای کشف عناصر خاکی نادر، میتواند به کمک بررسیهای تکمیلی در این مورد، دیدگاه مناسبی را در پیش روی تصمیمگیران این صنعت قرار دهد.https://jonsat.nstri.ir/article_191_8d2194fa102252278f05d408ae30a100.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139120180522R&D Planning of Thorium Fuel Pellets Fabrication Using Technology Roadmapping Techniqueبرنامهریزی تحقیق و توسعهی ساخت قرصهای سوخت هستهای توریم با استفاده از روش رهنگاری فنآوری466119210.24200/nst.2018.192FAافسانهاحمدی1. مرکز تحقیقات سیاست علمی کشور 2.پژوهشکده مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانسید سپهرقاضی نوریدانشکده مدیریت و اقتصاد، دانشگاه تربیت مدرسسید جواداحمدیپژوهشکده مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانبهزادسلطانیدانشکده مکانیک، دانشگاه کاشانفاطمهثقفیدانشکده مدیریت، دانشگاه تهراننیلوفرمحسنیپژوهشکده مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایران0000-0001-5383-9473Journal Article20161105Increasing of the global energy demand, effects of greenhouse gases emissions and restrictions on the use of renewable energies, will inevitably lead to rise again nuclear energy in the future. Due to the importance of energy security and the sustainability of resources, better waste management, as well as the inability to use nuclear proliferation, many countries have focused on the use of Thorium fuel in the nuclear energy field. It is very difficult to select appropriate technologies and make the right decisions about investing for R & D managers and policymakers because of resource constraints. The aim of this study is to use the technology roadmapping to support the development of the Thorium fuel pellets fabrication technology planning. First, the types of technology roadmapping processes were identified and T-plan approach were selected. Next, by holding workshops and expert panels, the type of fuel pellet, mixed Thorium with 4.8% enriched Uranium oxide pellet, was selected among carbide, oxide and metal fuels and its functional characteristics determined. Based on the technology importance, which was considered as capability and attractivity indicators, sedimentation and sol-gel methods were selected for powder production technologies, and SGMP and powder metalorgy methods were chosen because of their priorities. Finally, with the suggestion of research projects for the acquisition of technical knowledge of Thorium Fuel pellet fabrication, the technology roadmap was developed.افزایش تقاضای جهانی انرژی، همراه با حاد شدن مسائل مربوط به انتشار گازهای گلخانهای و محدودیتهای موجود در استفادهی گسترده از انرژیهای تجدیدپذیر، رشد مجدد انرژی هستهای را در آینده اجتنابناپذیر میسازد. به دلیل اهمیت امنیت انرژی و تأمین پایدار منابع، مدیریت بهتر پسماند و نیز عدم کاربرد در تکثیر سلاحهای هستهای، بسیاری از کشورها استفاده از سوخت توریمی در حوزهی انرژی هستهای را مورد توجه قرار دادهاند. اما انتخاب فنآوریهای مناسب و تصمیمگیری صحیح در مورد سرمایهگذاری برای مدیران تحقیق و توسعه و سیاستگذاران به علت محدودیت منابع کاری بسیار دشوار است. هدف از این مقاله بهکارگیری رهنگاری فنآوری برای پشتیبانی از برنامهریزی توسعهی فنآوری تولید قرصهای سوخت هستهای توریم است. رویکرد شروع سریع T-Plan برای رهنگاری محصول فنآوری ساخت قرصهای سوخت هستهای توریم انتخاب شد. با برگزاری کارگاهها و مصاحبه با متخصصان، نوع محصول (قرص سوخت) از میان گزینههای مختلف سوختهای کاربیدی، اکسیدی و فلزی، قرصهای ترکیبی اکسید توریم- اورانیم با غنای %4.8 انتخاب و مشخصههای عملکردی آن تعیین شد. براساس میزان اهمیت فنآوری که از شاخصهای توانمندی و جذاب بودن به دست آمد، در خصوص فنآوریهای تولید پودر، روشهای رسوبگیری و سل- ژل به عنوان دو روش انتخابی در نظر گرفته شدند. در فنآوری تولید قرص دو روش قرصسازی با ریزگویهای سل- ژل (SGMP) و متالورژی پودر انتخاب شدند. در نهایت با پیشنهاد سرفصلهای پژوهشی برای دستیابی به دانش فنی تولید قرص سوخت هستهای توریم از طریق اکتساب درونزا، رهنگاشت توسعهی فنآوری تولید قرص سوخت هستهای توریم تدوین شد.https://jonsat.nstri.ir/article_192_5310a3b649ac70f1a914e874f3b5389a.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139120180522Study of Parameters Affecting the Recovery of Vanadium from Saghand-e-Yazed Ore(Anomally-II) Using Alkaline Roasting – Acid Leaching Processبررسی پارامترهای مؤثر بر بازیابی وانادیم از کانسنگ ساغند یزد (آنومالی 2) با استفاده از فرایند تشویهی قلیایی- فروشویی اسیدی627119310.24200/nst.2018.193FAداودقدوسینژاد1. پژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایران 2. دانشکدهی مهندسی شیمی، دانشگاه صنعتی بابلمجیدتقیزادهدانشکدهی مهندسی شیمی، دانشگاه صنعتی بابلJournal Article20170827In this study, the feasibility of vanadium recovery from magnetite ore (Anomally II) of Saghand area in the central part of Iran was investigated. Alkaline roasting-acid leaching process was applied to separate and extract vanadium from magnetite ore. Initially, ore samples having dimensions of less than 100 microns were crushed and grounded. The roasting stage was conducted by placing the sample mixed with certain sodium carbonate (salt) in a muffle furnace at a certain temperature and time. The roasted sample was leached in sulfuric acid at a certain temperature, the liquid to solid ratio (l/s), as well as the concentration of acid and time. In this research, the effect of roasting and leaching different parameters on the vanadium recovery from magnetite ore was determined. The results showed that the optimum temperature, time and sodium carbonate content in the roasting process were 1000˚C, 2 h and 40 wt%, respectively. Also, values of concentration of sulfuric acid, temperature, liquid to solid ratio and time were optimized for the leaching process. The maximum vanadium recovery of 87.8% was achieved under the optimum leaching condition of 85˚C, L/S:10/1, sulfuric acid concentration:4M and leaching time 5h.در این پژوهش استخراج وانادیم از کانسنگ منیتیتی آنومالی 2 ساغند یزد، امکانسنجی شد. برای انجام این مهم از فرایندهای تشویهی قلیایی و فروشویی اسیدی استفاده شد. ابتدا کانسنگ تا ابعاد زیر 100 میکرون خرد و ساییده شد. فرایند تشویه با مخلوط کردن نمونه با مقدار معینی از نمک سدیم کربنات، در داخل کوره در درجه حرارت و زمان معین انجام شد. فروشویی نمونهی تشویه شده، با سولفوریک اسید با غلظت مشخص و در درجه حرارت، نسبت مایع به جامد، و زمان مشخص به انجام رسید. تأثیر پارامترهای مهم تشویه و فروشویی بر بازدهی استخراج وانادیم از کانسنگ مورد بررسی در این پژوهش مورد ارزیابی قرار گرفت. با توجه به نتایج آزمایشها، مقادیر بهینهی درجه حرارت، نمک مصرفی و زمان فرایند تشویه به ترتیب: 1000 درجهی سلسیوس، 40 درصد وزنی و 2 ساعت هستند. همچنین مقادیر غلظت سولفوریک اسید، درجه حرارت، نسبت مایع به جامد و زمان فرایند فروشویی بهینه شدند. بیشینه بازدهی استخراج وانادیم در شرایط بهینهی فروشویی: غلظت سولفوریک اسید 4 مول بر لیتر، درجه حرارت 85 درجهی سلسیوس، نسبت مایع به جامد برابر با 10 میلیلیتر بر گرم و زمان 5 ساعت برابر با %87.8 به دست آمد.https://jonsat.nstri.ir/article_193_558801770a069974159cf31c42ad2c9c.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139120180522Separation and Selective Transport of Zirconium (IV) and Niobium (V) from Hydrochloric Media Through a Bulk Liquid Membraneجداسازی و انتقال انتخابی زیرکنیم (IV) و نیوبیم (V) از محیط هیدروکلریک اسید از طریق غشای مایع تودهای728419410.24200/nst.2018.194FAسعیدعلمدار میلانیپژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانامیرچرخیپژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانسعیدعشقیپژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانJournal Article20170122The separation of zirconium and niobium from lanthanides in hydrochloric medium and the selective transport of them via bulk liquid membrane (BLM) was examined. Tri-n-butyl phosphate (TBP), tri-n-octylamine (TNOA) and dibenzo-18-crown-6 (DBC 6) diluted in kerosene and benzene were used as a carrier. The various effects on the transport and separation of zirconium (IV) and niobium (V) were studied: concentration of hydrochloric acid in the feed and strip solutions, type and concentration of the carrier (TBP, TNOA, DBC 6) in the membrane phase. The extraction of zirconium (IV) and niobium (V) in the membrane phase from 9.0 M hydrochloric acid by 30% (v/v) TBP was achieved by leaving lanthanides in the feed solution. The quantitative recovery of zirconium (IV) and niobium (V) were achieved by 0.5 M HCl. Furthermore, the transport kinetics study showed that niobium transport process exhibits slightly faster kinetics than zirconium.The kinetics of Zr(IV)/Nb(V) transport were investigated assuming a consecutive, irreversible second-order reaction on the interfaces. It was found that the rate constant of niobium (V) transport from the donor phase-to-the membrane and from the membrane to the acceptor phase was, respectively, about 98 and 24% more than the zirconium (IV) transport rate constant.(با عرض پوزش به علت اشکال پیش آمده در فرمول نویسی، اصل چکیده را از فایل pDF مقاله مطالعه فرمایید)<br /> جداسازی زیرکنیم و نیوبیم از لانتانیدها در محیط هیدروکلریک اسید و انتقال انتخابی آنها از طریق غشای مایع تودهای مورد بررسی آزمایشگاهی قرار گرفت. تریبوتیل فسفات (TBP)، تری- ان- اکتیل آمین (TNOA) و دی بنزو-18- کراون- 6 (؟) رقیق شده در کروزن و بنزن به عنوان حامل به کار گرفته شدند. اثرات عاملهای مختلف مانند غلظت هیدروکلریک اسید در محلولهای خوراک و بازیابی (عریانساز)، نوع و غلظت حامل (TNOA، TBP و ?) در فاز غشا، بر روی فرایندهای جداسازی و انتقال زیرکنیم (IV) و نیوبیم (V) مورد بررسی قرار گرفتند. استخراج زیرکنیم (IV) و نیوبیم (V) از محلول هیدروکلریک اسید 9 مولار به درون فاز غشاء با باقی گذاشتن لانتانیدها در محلول خوراک به وسیلهی تریبوتیل فسفات (TBP) %30 حجمی در کروزن فراهم شد. هیدروکلریک اسید 0.5 مولار، بازیابی کمٌی زیرکنیم (IV) و نیوبیم (V) را فراهم نمود. به علاوه، مطالعهی سینتیک انتقال نشان داد که روند انتقال نیوبیم (V)، سینتیک کمی سریعتر از سینتیک زیرکنیم (IV) ارایه میدهد. سینتیک انتقال زیرکنیم (IV) و نیوبیم (V) با فرض یک واکنش متوالی مرتبهی دوم برگشتناپذیر مورد بررسی قرار گرفت. مشخص شد که ثابت سرعت انتقال نیوبیم (V) از فاز دهنده به فاز غشا و از غشا به فاز پذیرنده، به ترتیب، حدود 98 و 24 درصد بزرگتر از ثابت سرعت انتقال زیرکنیم (IV) است.https://jonsat.nstri.ir/article_194_815f1ff82464f269c180f5de918e05cd.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139120180522Structural, Electronic and Thermochemical Study of Interaction Between Lanthanum Trivalent Ion with Diglycolamide Extractants Using Density Functional Theoryمطالعه ساختاری، الکترونی و ترمو شیمیایی برهمکنش یون سه ظرفیتی لانتانیم و استخراجکنندههای دی گلیکول آمیدی با استفاده از روشهای نظریهی تابعی چگالی859519510.24200/nst.2018.195FAطیبهحسیننژادگروه شیمی، دانشکدهی فیزیک و شیمی، دانشگاه الزهرافاطمهماموسیگروه شیمی، دانشکدهی فیزیک و شیمی، دانشگاه الزهراJournal Article20170805Diglycolamides have been widely investigated for the high efficient extraction of lanthanide and actinide ions from nuclear wastes. In the present study, we have mainly investigated the structural changes of diglycolamides and their interaction with trivalent lanthanum cation from the structural, electronic and thermodynamical viewpoints, using density functional theory (DFT) approach. In this line, we have assessed comparatively some structural changes in diglycolamide ligand, including displacement of oxygen ether with nitrogen, using methyl substituent and also adding methylene between oxygen ether and carbonyl functional group. The calculated thermodynamical properties indicate that addition of methylene groups between the ether oxygen and carbonyl functional groups decreases the performance of these ligands in the extraction of lanthanum ions. Moreover, our calculated results demonstrate the thermodynamical preference of using n-hexane as solvent in comparison with dodecane that is in agreement with the experimental observations. In the next step, the trend of variations in the calculated bond order of some selected key bonds through the complexation process has been analyzed. Finally, we have calculated and discussed the deformation energies of ligands through the complexation with the lanthanum cation.دی گلیکول آمیدها به طور گستردهای برای استخراج یونهای لانتانیدها و آکتینیدها از پسماندهای هستهای و افزایش کارایی این ترکیبات در فرایند استخراج مورد توجه قرار دارند. در این پژوهش، تغییرات ساختاری دی گلیکول آمیدها در برهمکنش با یون سه ظرفیتی لانتانیم با استفاده از روشهای نظریهی تابعی چگالی به لحاظ ساختاری، الکترونی و ترمودینامیکی مورد مطالعه قرار گرفته است. در این رابطه، برخی از تغییرات ساختاری در دی گلیکول آمیدها، از جمله جایگزینی اکسیژن اتری با نیتروژن و اضافه شدن استخلاف متیل و نیز گروههای متیلن میان اکسیژن اتری و گروههای کربنیلی به زنجیرهی دی گلیکول آمید بررسی شده است. دادههای ترمودینامیکی محاسبه شده نشان میدهد که اضافه کردن گروههای متیلن میان اکسیژن اتری و گروههای کربنیلی کارایی قدرت استخراج این لیگاندها را کم میکند. علاوه بر این، هگزان نرمال در مقایسه با دودکان حلال مطلوبتری در فرایند تشکیل کمپلکس است، که در توافق با نتایج تجربی است. برخی مرتبهها و طولهای پیوندی کلیدی در محصولات بررسی و مقادیر انرژی تغییر ساختار لیگاند طی فرایند تشکیل کمپلکس با یون لانتانیم بحث شده است.https://jonsat.nstri.ir/article_195_e5ccefb2110348e8b149e939288cb86e.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139120180522Evaluation of Grain Yield and Yield Stability in Rapeseed (Brassica Napus) Mutant Lines Using GGE Biplotارزیابی عملکرد دانه و پایداری عملکرد در لاینهای جهشیافتهی کلزا (Brassica napus) با استفاده از رهیافت GGE بایپلات9610219610.24200/nst.2018.196FAبهنامناصریان خیابانیپژوهشکدهی کشاورزی هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانبهرامعلیزادهمؤسسهی تحقیقات اصلاح و تهیهی نهال و بذر، ازمان تحقیقات، آموزش و ترویج کشاورزیJournal Article20170406In order to evaluate the mutant lines derived from irradiation of oilseed rape cultivar RGS003 using gamma-ray, this study was carried out during two growing seasons from 2011 to 2013, at the experimental fields in the Nuclear Agricultural Research School. The experimental design was a randomized complete block design with three replications. Significant differences were observed between mutant genotypes and cultivars for grain yield during two years of the experiment. Interaction of year × genotype (GE) showed a significant difference. Identification and selection of mutant lines, especially in the quantitative traits due to the interaction of genotype and environmental effects, is very important and complicated. The biplot method is an effective approach for the selection of mutant lines, based on the traits and yield stability over the time. The aim of this research was selection of the superior mutant lines from of 32 mutants, using the GGE biplot method. The mutant lines RG16, RG14 and RG31 showed high and stable grain yields compare to other mutant lines and cultivars. According to our results, mutation breeding can be used effectively in oil seed rape improvement.به منظور ارزیابی عملکرد دانه و پایداری عملکرد لاینهای جهشیافته حاصل از پرتودهی رقم 003 RGS با پرتو گاما آزمایشی در قالب طرح بلوکهای کاملاً تصادفی با سه تکرار در طی سالهای زراعی 90 تا 92 در مزرعهی پژوهشکدهی کشاورزی هستهای اجرا شد. عملکرد دانهی ژنوتیبها در طی دو سال آزمایش اختلاف معنیدار داشتند. اثر متقابل سال ´ ژنوتیپ (GE) در سطح احتمال %5 معنیدار بود. شناسایی و جداسازی لاینهای جهشیافته در روشهای اصلاح به کمک جهش بهخصوص در صفات کمّی به دلیل وجود اثرهای متقابل محیط و ژنوتیپ اهمیت بالایی دارد. روش بایپلات روش مؤثری در جداسازی و انتخاب لاینهای جهشیافته براساس صفات مورد اندازهگیری و نیز پایداری صفت در طول زمان است. در این پژوهش برای انتخاب لاین برتر از میان 32 لاین جهشیافته از روش GGE بایپلات استفاده شد. با این روش سه لاین جهشیافته RG14، RG16 و RG31 بهعنوان لاینهای برتر با عملکرد بالا و پایدار، معرفی شد. بر اساس نتایج این آزمایش، روش اصلاح به کمک جهش در اصلاح کلزا بسیار مؤثر و سودمند است.https://jonsat.nstri.ir/article_196_d11af50ba16392196831379eaff18abb.pdf