پژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139320181122Low Energy Neutrino Generator on the Basis of FLUKAمولد رویداد نوترینوی کمانرژی بر پایهی فلوکا1821710.24200/nst.2018.217FAحسناختری قمیپژوهشکدهی کاربرد پرتوها، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانمحمد جوادصفریدانشکدهی مهندسی انرژی و فیزیک، دانشگاه صنعتی امیرکبیر، تهران ـ ایرانفریدونعباسیدوانیگروه کاربرد پرتوها، دانشکدهی مهندسی هستهای، دانشگاه شهید بهشتی، تهران ـ ایرانJournal Article20170911Detection of low-energy anti-neutrino has certain applications in science and technology. Recently, the FLUKA collaboration, so-called the PEANUT model, has been developed which is capable of simulating all neutrino flavors from the threshold up to TeV. Here, the FLUKA code will be demonstrated as a neutrino event generator, upon emphasizing the interaction of low-energy electron anti-neutrino (i.e., those coming from nuclear reactors). The results which are reported in this paper show the applicability and capability of the code to be applied for such purposes. An important feature of the FLUKA code is its potential to track several types of particles (here most of them are considered as secondaries), and also the complicated geometries which imply that the present code is a powerful tool kit for neutrino engineering applications.آشکارسازی پادنوترینوهای کمانرژی، کاربردهایی در علوم و مهندسی دارد. اخیراً تیم فلوکا مدل موسوم به پینات (PEANUT) را توسعه داده است که توانایی شبیهسازی برهمکنشهای همهی طعمهای نوترینو از آستانه تا TeV را دارد. در این مقاله فلوکا با تأکید بر برهمکنشهای پادنوترینوی الکترون کمانرژی (یعنی پادنوترینوهای حاصل از رآکتور) به عنوان یک مولّد رویداد نوترینو معرفی میشود. نتیجههای به دست آمده اعتبار و توانایی کاربرد کد را نشان میدهد. نکتهی قابل توجه این است که فلوکا توانایی رضایتبخشی در ترابرد بسیاری دیگر از انواع ذرّهها در هندسههای پیچیدهتر را دارد که این، فلوکا را به ابزاری قدرتمند برای هدفهای مهندسی نوترینو تبدیل میکند.https://jonsat.nstri.ir/article_217_3f7010d71ff42cc4b84fb55945cdc24c.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139320181122Analysis of Thermal Conductivity Degradation in Irradiated UO2 Fuel Due to Porosity Formation at High Burnupتحلیل افت رسانندگی گرمایی سوخت پرتو دیدهی UO2 به دلیل تولید تخلخل در میزان مصرف بالای سوخت92021810.24200/nst.2018.218FAبهارهروستاییپژوهشکدهی راکتور و ایمنی هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانحسینکاظمینژادپژوهشکدهی کاربرد پرتوها، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانصمدخاکشورنیاپژوهشکدهی فیزیک و شتابگرها، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانJournal Article20170706One of the factors that changes the UO<sub>2</sub> fuel thermal conductivity is the generated porosity in the fuel due to increasing burnup. At high burnups, the structure known as rim region, is created. This is due to the Xe depletion process from the fuel matrix, porosity formation, and fuel grain recrystallization, which in turn change the fuel thermal conductivity. In this paper by the use of existing low temperature high burnup fission gaseous swelling model with the progressive recrystallization for UO<sub>2</sub> fuel, the matrix swelling terms are calculated and the evolution of the total volume porosity up to burnup of 120 MWd/kgU is estimated. For the study the effect of porosity formation on the irradiated UO<sub>2</sub> thermal conductivity, the HALDEN correlation of the thermal conductivity is selected. Then, a porosity correction factor is developed based on an assumption that the fuel morphology is a three-phase type consisting of the pores, with no contribution to the matrix swelling and large pores due to intergranular bubbles with the contribution to matrix swelling dispersed in the fully dense material, composed of UO<sub>2</sub> matrix and solid fission products. The predicted thermal conductivity, based on the present porosity correction factor, demonstrates an additional degradation of 25% due to porosity formation at the burnup levels around 120 MWd/kgU causing an increase in the fuel temperature.یکی از عاملهای تغییر رسانندگی گرمایی سوخت UO<sub>2</sub>، تخلخل به وجود آمده در سوخت حین افزایش میزان مصرف سوخت است. در میزان مصرفهای بالای سوخت، ساختاری موسوم به ناحیهی لبه (rim) که ناشی از فرایند تهی شدن شبکهی سوخت از گاز زنون، تولید تخلخل و باز تبلور دانههای سوخت است، به وجود میآید که به نوبهی خود رسانندگی گرمایی سوخت را دست خوش تغییر میکند. در این مقاله با استفاده از یک مدل تورم شبکهی سوخت ناشی از گاز شکافت که در محدودهی دما- پایین و میزان مصرف بالای سوخت معتبر است و نیز با در نظر گرفتن اثر باز تبلور ناشی از تابشدهی سوخت UO<sub>2</sub>، تورم شبکهی سوخت محاسبه میشود و مقدار تخلخل کل تا میزان مصرف سوخت MWd/kgU 120 تعیین میشود. برای مطالعهی اثر شکلگیری تخلخل بر روی رسانندگی گرمایی سوخت UO<sub>2</sub> تابش دیده، رابطهی تجربی رسانندگی گرمایی هالدِن انتخاب شده است که با یک ضریب تصحیح تخلخل پیشنهاد شده، ترکیب میشود. این ضریب تخلخل براساس ریختشناسی سه فازی سوخت تابشدیده توسعه مییابد، که شامل تخلخلهای بدون سهم در تورم شبکهی سوخت و تخلخلهای درشت ناشی از حبابهای مرزدانهای سهیم در تورم شبکهی سوخت است و فرض میشود به صورت یکنواخت در مادهی سوخت چگال، متشکل از شبکهی سوخت UO<sub>2</sub> و محصولهای جامد شکافت پراکنده شده باشد. با در نظر گرفتن تحول تخلخل با مصرف سوخت، کاهشی در حدود %25 در رسانندگی گرمایی سوخت UO<sub>2</sub> در محدودهی میزان مصرف سوخت موضعی MWd/kgU 120 مشاهده میشود که افزایش موضعی دمای سوخت را در بر خواهد داشت.https://jonsat.nstri.ir/article_218_ce95904d410f71c51ec54bb12227a749.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139320181122Generation of Nonlinear Currents and Helicon Waves in a Semiconductor Quantum Plasmaتولید جریانهای غیرخطی و موجهای هلیکون در یک پلاسمای کوانتومی نیمرسانا212721910.24200/nst.2018.219FAاحمدمهرآمیزگروه فیریک، دانشکدهی علوم پایه، دانشگاه بینالمللی امام خمینی (ره)، قزوین ـ ایرانبهنامرجبیگروه فیریک، دانشکدهی علوم پایه، دانشگاه بینالمللی امام خمینی (ره)، قزوین ـ ایرانJournal Article20171108In this paper, an analytical investigation has been presented on the excitation of nonlinear current densities and helicon waves resulting from the interaction of the electromagnetic pump waves in a semiconductor quantum plasma. For this parpose, a system of modified fluid equations has been used to find the nonlinear response of electrons in the semiconductor in the presence of an external magnetic field. It is shown that due to the interaction of two electromagnetic pump waves in the semiconductor medium, a pondermotive force at the beating frequency becomes finite and generates a helicon wave. Furthermore, the power carried by the excited helicon wave is calculated and evaluated relative to the typical parameters of a solid state plasma medium. The results indicate that the power of the excited wave gradually increases with the external magnetic field, as well as, the equilibrium density of the carriers, and decreases by the electron-phonon collision frequency.
در این مقاله، به شیوهای تحلیلی چگونگی برانگیزش چگالی جریانهای غیرخطی و موجهای هلیکون ناشی از برهمکنش پرتوهای الکترومغناطیسی پمپ شده به یک پلاسمای کوانتومی نیمرسانا مورد بررسی قرار میگیرد. بدین منظور، مدل سیالی تعمیمیافتهای برای به دست آوردن پاسخ غیرخطی الکترونهای محیط در حضور میدان مغناطیسی خارجی به کار گرفته میشود. نشان داده میشود که در نتیجهی برهمکنش دو موج الکترومغناطیس، یک نیروی پاندرماتیو در محیط نیمرسانا ایجاد شده و باعث برانگیزش یک موج هلیکون میشود. علاوه براین، چگالی توان موج هلیکون برانگیخته شده محاسبه شده و نسبت به پارامترهای مختلف محیط پلاسمای حالت جامد مورد ارزیابی قرار میگیرد. همچنین با تحلیل نموداری نشان داده میشود که چگالی توان موج برانگیخته با افزایش میدان مغناطیسی خارجی و چگالی تعادلی الکترونها افزایش و با افزایش بسامد برخورد الکترون- فونون کاهش مییابد.https://jonsat.nstri.ir/article_219_448b9f79fbb1d4c06411dda2e045ce6a.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139320181122A System Dynamics Model for Inventory Decisions in Radionuclide Generatorsیک مدل پویاییشناسی سیستم برای تنظیم تصمیمهای موجودی در مولدهای رادیونوکلید284322010.24200/nst.2018.220FAمحمدقدیمیدانشکده مهندسی صنایع، دانشگاه علم و صنعت ایران
تهران ـ ایرانمحمدعلیشفیعادانشکده مهندسی صنایع، دانشگاه علم و صنعت ایران، صندوق پستی، تهران ـ ایرانمیرسامانپیشواییدانشکده مهندسی صنایع، دانشگاه علم و صنعت ایران، صندوق پستی، تهران ـ ایرانبابکفلاحیگروه پزشکی هستهای، دانشکده پزشکی دانشگاه علوم پزشکی و خدمات درمانی تهران، تهران ـ ایرانJournal Article20171020A system dynamics model for simulating radionuclide generators inventory management decisions is presented in this research report. The radiopharmaceutical is generated gradually from another radioactive element, so called mother element in the radionuclide generators, and after each extraction of the produced radioactive material, so called elution, the radiopharmaceutical is produced in the proportion of the residue from the mother element. Based on the remained mother element, production time dependence, mutual interaction of variables, nonlinear distribution function, and reproduction, lead to the incremental complexity of the mathematical model and cause the model making affair harder in common place operation research methods. In the proposed model appeared in this report, the above-mentioned factors are modeled and due to the nature of system dynamics models' development and the possibility of developing the boundary of the model, the feasibility of utilizing the model, as a basic one, in more complex modeling affairs is presented. The model behavior re-production tests and the system dynamics' extreme conditions, illustrate the validity of the proposed model. Ultimately, in this paper, several scenarios for the productivity raise are illustrated and twenty five percent improvement has been shown compared to the conventional models.در این پژوهش، یک مدل پویاییشناسی سیستم، برای شبیهسازی تصمیمهای مدیریت موجودی مولدهای رادیونوکلید ارایه شده است. در مولدهای رادیونوکلید، رادیودارو به مرور زمان از رادیونوکلید دیگری به نام رادیونوکلید مادر، تولید میشود و پس از هر بار استخراج (دوشیدن) رادیوداروی تولید شده، رادیودارو به تناسب مقدار رادیونوکلید مادر باقیمانده، تولید میشود. وابستگی تولید به زمان، تأثیر متقابل متغیرها، تابع توزیع غیرخطی و بازتولید با توجه به مقدار باقیماندهی رادیونوکلید مادر، باعث پیچیدگی فزایندهی مدلهای ریاضی شده و مدلسازی را در روشهای متداول پژوهش در عملیات، مشکل میسازد. در مدل ارایه شده، عاملهای پیشگفته مدل شده است و با توجه به ماهیت توسعهیابندهی مدلهای پویاییشناسی سیستم و امکان توسعهی مرز مدل، امکان استفاده از مدل به عنوان مدل پایه در مدلسازیهای پیچیدهتر فراهم شده است. آزمونهای بازتولید رفتار مدل و شرایط حدی پویاییشناسی سیستم، حکایت از اعتبار مدل ارایه شده دارد. در انتها چند سناریو برای افزایش بهرهوری ارایه شده و بهرهوری حاصل، به مقدار 25 درصد نسبت به شرایط متداول بهبود یافته است.https://jonsat.nstri.ir/article_220_390e6e6ac517e75454f9ce602e39affa.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139320181122Investigation of Performance of Commercially Available Nanofilter Membranes in Selective Separation of Uranium (VI) Ions from Iron (III)بررسی عملکرد غشاهای نانوفیلتر تجاری در جداسازی انتخابی یونهای اورانیم (VI) از آهن (III)445622110.24200/nst.2018.221FAمرتضیقاسمی ترکآبادیپژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانعلیرضاکشتکارپژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانسیدجابرصفدریپژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانJournal Article20180112Performance of Three commercially available nanofilter membranes (PES-2 , NF-1 and NF-2) in terms of rejection, permeate flux, and membrane selectivity under a variety of operational conditions was evaluated for selective separation of uranium (VI) ions from iron (III). The membranes permeate fluxes were decreased with an increase in the pH range of 3-6, while the rejection of ions was increased. Uranium rejection with these membranes was lower than iron rejection and the PES-2 and NF-1 membranes had the maximum membrane selectivity of iron over uranium at pH 4. The maximum membrane selectivity of NF-2, however, was 2.97 at pH 3. The PES-2 membrane had the maximum iron rejection of 72.25% at the pressure 10 bar. For NF-1 the rejection of iron and uranium was found to be relatively constant (about 97% and 84%, respectively) against increasing the pressure. As the pressure increased from 5 to 20 bar, iron rejection by NF-2 was remained constant (about 97%) but uranium rejection by this membrane was decreased from 84.06% to 70.46%. It was found that the effect of increasing the iron concentration from 0.12 to 1mM on the behavior of these membranes is different. The maximum membrane selectivity of uranium over iron by the NF-1 and NF-2 membranes was 43.71 and 13.59, respectively, which showed that NF-1 has a very desirable performance. It seams that the relatively new process of nanofiltration has a good potential for selective separation of uranium from iron.برای جداسازی انتخابی یونهای اورانیم (VI) از آهن (III)، عملکرد سه غشای نانوفیلتر تجاری (2-NF-1 ،PES و 2-NF) از نظر میزان، شدت جریان عبوری و گزینشگری تحت شرایط عملیاتی مختلف ارزیابی شد. با افزایش pH از 3 تا 6، شدت جریان عبوری از غشاها کاهش و ضریب بازداری یونها افزایش یافت. اورانیم دارای ضریب بازدارش کوچکتری نسبت به آهن بوده و غشاهای 2-PES و 1-NF در 4 pH بیشینهی گزینشگری اورانیم نسبت به آهن را دارند. اما، بیشینهی گزینشگری 2-NF برابر با 2.97 و در 3 pH است. غشای 2-PES در فشار bar 10 دارای مقدار بیشینهی %72.25 برای بازداری آهن بوده و مقدارهای بازداری آهن و اورانیم برای 1-NF در فشارهای مختلف نسبتاً ثابت بود (به ترتیب حدود %97 و %84). با افزایش فشار از 5 تا bar 20، بازدارش آهن توسط 2-NF ثابت مانده (حدود 97%) اما میزان بازدارش اورانیم توسط این غشا <br /> از %84.06 به %70.46 کاهش مییابد. رفتار این غشاها در مقابل افزایش غلظت یونهای آهن از 0.12 به mM 1 متفاوت است. بیشینهی گزینشگری برای غشاهای 1-NF و 2-NF به ترتیب برابر با 43.71 و 13.59 بود که نشان میدهد 1-NF عملکرد خیلی مطلوبی دارد. به نظر میرسد فرایند نسبتاً جدید نانوفیلتراسیون دارای قابلیت خوبی در استفاده از آن برای جداسازی انتخابی اورانیم از آهن است.https://jonsat.nstri.ir/article_221_dbb3a621729a21e528c6bb6a4dd8644d.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139320181122Extraction and Transport of Thorium(IV) by Polymer Inclusion Membranes Incorporating Di-(2-ethylhexyl) Phosporic Acid as the Carrier Extractantاستخراج و انتقال توریم (IV) با غشای درون پلیمری حاوی دی (2- اتیل هگزیل) فسفریک اسید بهعنوان حامل576722210.24200/nst.2018.222FAحمیدرضااعرابیدانشکدهی مهندسی شیمی، پردیس دانشکدههای فنی دانشگاه تهران، تهران ـ ایرانسعیدعلمدارمیلانیپژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانحسینابوالقاسمیدانشکدهی مهندسی شیمی، پردیس دانشکدههای فنی دانشگاه تهران، تهران ـ ایرانJournal Article20180301Extraction and transport of thorium (IV) from nitrate solutions was investigated using polymer inclusion membrane (PIM), based on di(-2-ethylhexyl) phosphoric acid (D<sub>2</sub>EHPA) and poly(vinyl chloride) (PVC). This study investigates the influence of the main system parameters (i.e., pH of donor phase, type and concentration of acid in acceptor phases, percentage of D<sub>2</sub>EHPA in the membrane, initial Th(IV) concentration) on the extraction and transport process by means of batch method. The transport factor of Th(IV) as high as 94.81% were recorded using a membrane composed of 45% D<sub>2</sub>EHPA, and 55% PVC (w/w) from a solution containing 112 mg L<sup>-1</sup> Th(IV) in 0.0158 mol L<sup>-1</sup> HNO<sub>3</sub> (pH 1.8) into a solution containing 3 mol L<sup>-1</sup> H<sub>2</sub>SO<sub>4</sub>. استخراج و انتقال توریم (IV) از محلولهای نیتراتی با استفاده از غشای درون پلیمری پلیوینیل کلرید / دی (2- اتیلهگزیل) فسفریک اسید (D<sub>2</sub>EHPA/PVC) مورد بررسی قرار گرفت. اثر پارامترهای اصلی سیستم (یعنی، pH فاز دهنده، نوع و غلظت اسید در فاز پذیرنده، درصد D<sub>2</sub>EHPA در غشا، غلظت اولیهی توریم (IV) در فاز دهنده) بر روی فرایندهای استخراج و انتقال، به روش ناپیوسته بررسی شد. بیشترین مقدار ضریب انتقال توریم با استفاده از غشای تشکیل شده از %45 وزنی D<sub>2</sub>EHPA و %55 وزنی پیویسی، محلول 112 میلیگرم بر لیتر توریم با 1.8 pH به عنوان فاز دهنده، محلول 3 مول بر لیتر سولفوریک اسید به عنوان فاز پذیرنده (محلول عریانساز)، برابر با %94.81 به دست آمد.https://jonsat.nstri.ir/article_222_6d588fb143444d0c05e8897d42613109.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139320181122Study and Statistical Analysis of Geochemical Relations Active Elements in Sedimentary Phosphate Layers of Kuh-e- Lar Zagros-Anticlineبررسی و تحلیل آماری ارتباط ژئوشیمیائی عناصر پرتوزا موجود در لایه های رسوبی فسفات دار در منطقه تاقدیس کوه لار- زاگرس.687822410.24200/nst.2018.224FAفریدبلورچی فرد1. پژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایران
3. گروه زمینشناسی، دانشکده علوم زمین، دانشگاه خوارزمی، تهران ـ ایرانبهزادمهرابیگروه ژئوشیمی، دانشکده علوم زمین، دانشگاه خوارزمی، تهران ـ ایرانایوبمعمارپژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانفرج اللهفیاضیگروه زمینشناسی، دانشکده علوم زمین، دانشگاه خوارزمی، تهران ـ ایرانJournal Article20170904 In this research, the layers of the sedimentary environment of the Pabdeh formation, which have different variation amounts of phosphate minerals (Apatite), were studied. The XRF and XRD analyses were performed for determination of the minerals and the radioactive elements, REEs and compounds for 54 selected samples (with high amounts of P<sub>2</sub>O<sub>5</sub>). According to the importance of the geochemical elements relations and their interpretation, the statistical analysis methods cluster analysisand principal component analysis, (PCA) were used. According to the results of the component correlation matrix, after rotation through the direct oblimin method, and normalizing with Kaiser method, the amounts of components and the ratio between them are well illustrated and the XRF results were divided into two principal components.لایههایرسوبی سازند پابده که حاوی مقدارهای مختلف فسفات، به صورت کانی اصلی خانوادهی آپاتیت هستند، بررسی شد. به منظور تعیین عناصر شیمیایی موجود از نتیجههای تجزیههای عنصری با استفاده از تکنیکهای پراش پرتو ایکس( XRD<strong>)</strong>و فلوئورسانی پرتو ایکس <strong>(</strong>XRF<strong>)</strong> استفاده شد. با توجه به اهمیت ارتباط ژئوشیمیایی عنصرها، برای شناسایی و تحلیل همبستگی آنها در این مقاله روشهای آماری و تجزیهی خوشهای و تجزیه به عاملهای اصلیبه کار گرفته شد. استفاده از این روشها برای تحلیل آماری مؤلفههای اصلی بر روی نتیجههای تجزیهی فلوئورسانی پرتو ایکس نمونههای این پژوهش بسیار مناسب بوده است. به طور ویژه مؤلفهها (عنصرها و ترکیبهای موجود) برای 54 نمونهی انتخاب شده (با بیشترین مقدار P<sub>2</sub>O<sub>5</sub>) شناسایی شد که آنها بهخوبی ارتباط ژئوشیمیایی عناصر پرتوزا و عناصر خاکی نادر با کانی فسفات را نشان میدهند. براساس نتیجههای حاصل از ماتریس همبستگی مؤلفهها بعد از چرخش با روش دایرکت ابلیمین، و با بهنجار کردن به روش کایزر، مقدار مؤلفهها و نسبت بین آنها نشان داده شده است و نتیجههای تجزیهی فلوئورسانی پرتو ایکس به خوبی به دو مؤلفهی اصلی تقسیمبندی شد.https://jonsat.nstri.ir/article_224_b4b0c18f0594b0d5b96bdb302241c3da.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139320181122The Introduction of Volcanogenic Uranium Mineralization Using
Geological, Alteration, Mineralization and Geochemical Evidence at East Bam (South - East of Iran)معرفی کانیزایی اورانیم آتشفشانزاد با استفاده از شاهدهای زمینشناختی، دگرسانی، کانیشناختی و ژئوشیمیایی در خاور بم (جنوب - خاوری ایران)7910222510.24200/nst.2018.225FAمحمدگودرزیگروه زمینشناسی، دانشکده علوم، دانشگاه لرستان-
لرستان ـ ایرانحسنزمانیانگروه زمینشناسی، دانشکده علوم، دانشگاه لرستان - لرستان ـ ایرانعلیرضاجوانشیرگروه زمینشناسی، دانشکده علوم، دانشگاه تربیت مدرس، تهران ـ ایرانمحمدرضارضوانیانزادهپژوهشکدهی مواد و سوخت هستهی، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانمحمدرضاقادریدانشکده فنی، دانشگاه تهران، تهران ـ ایرانJournal Article20170926The studied area is located in the central Iran micro-continent, in the southern part of Lut block, 45 kilometers east of Bam Township. The main units of the area are mostly intercalation of pyroclastic rocks and lava layers in the age of Eocane, with the general trend of southwest- northeast and include high potassium calc- alkaline magma that their formation are related to the tectonic environments of magmatic arc and subduction zone. Argillic, silica, hematite, zeolite and chlorite alteration are observed in the area in relationship with uranium mineralization. The geochemical complexes related to uranium presence were identified in the study area. They are: complexes in relation with acidic and moderate rocks, including U-W-As-Mo-S-Cu-Ag, and complexes related to the basic igneous rocks, including U-Ni-V-Ag-Co-W-Mo-Cr-Cu-S. The main observed structures and textures in this area involve stock work, vein veinlet, corrosion, radial, release and peripheral membrane. The main mineralization in the area includes uranium secondary minerals contains Boltwoodite, Phosphuranylite and carnotite, manganese oxides, iron oxides and hydroxides, a few sulfide, zeolite mineral group and other minerals groups which mostly are formed under the influence of hydrothermal and late supergene processes. Based on a comparison pattern of mineralization in the area and its adjustment with the geological, alteration and geochemical conditions in uranium deposits, the most possible choice for mineralization type in the area has been introduced as volcanogenic uranium mineralization.منطقهی مطالعاتی در خرده- قارهی ایران مرکزی، بخش جنوبی بلوک لوت و 45 کیلومتری خاور شهرستان بم واقع شده است. واحدهای اصلی منطقه از توالی سنگهای آذرآواری و لایههای گدازهای به سن ائوسن با روند کلی شمال باختری- جنوب خاوری و متشکل از ماگمای کالکآلکالن پتاسیم- بالا هستند که تشکیل آنها مرتبط با محیط زمینساختی قوس ماگمایی و حوزهی فرورانش است. ناحیههای دگرسانی رسی، سیلیسی، هماتیتی، زئولیتی و کلریتی در ارتباط با کانیزایی اورانیم در منطقه مشاهده میشوند. مجموعههای ژئوشیمیایی مرتبط با حضور اورانیم در محدودهی مورد مطالعه عبارتاند از مجموعههای مرتبط با سنگهای اسیدی و حدواسط شامل U-W-As-Mo-S-Cu-Ag و مجموعههای مرتبط با سنگهای آذرین بازیک که شامل U-Ni-V-Ag-Co-W-Mo-Cr-Cu-S هستند. ساختارها و بافتهای اصلی مشاهده شده در منطقه شامل استوکورک، رگهرگچه، خوردگی، شعاعی، انتشاری و غشای حاشیهای هستند. عمده کانیزایی منطقه شامل کانیهای ثانویهی اورانیم شامل بُلتودیت، فسفرانیلیت و کارنوتیت، منگنز اکسیدها، آهن اکسیدها و هیدروکسیدها، مقدار کمی سولفید (پیریت)، کانیهای گروه زئولیت و سایر گروههای کانیها هستند که غالباً در اثر فرایندهای گرمابی و برونزاد بعدی تشکیل شدهاند. بر اساس مقایسهی الگوی کانیزایی منطقه و تطبیق آن با شرایط زمینشناختی، دگرسانی و ژئوشیمیایی کانسارهای اورانیم، محتملترینگزینه برای گونهی کانیزایی در منطقه، کانیزایی اورانیم آتشفشانزاد معرفی شد.https://jonsat.nstri.ir/article_225_2fa16fb26ea61b0ea63447df80e4ba8c.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139320181122The Study of Scattering and Transport of Electron Beam Into Dense Fuel for Fast-Shock Ignition Approachبررسی پراکندگی و ترابرد باریکهی الکترونی به درون سوخت چگال در رویکرد افروزش سریع- ضربهای10311222610.24200/nst.2018.226FAسیدابوالفضلقاسمیپژوهشکدهی پلاسما و گداخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانامیرحسینفرهبدپژوهشکدهی پلاسما و گداخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانJournal Article20171114The stopping power, penetration and scattering of high energy electrons with different energy distribution functions into dense fuel and hot-spot (fuel core) have been considered for a fast-shock ignition scenario. The analytical calculations indicate that fast electrons with two-temperature energy distribution function penetrate more into the dense fuel, in comparison with the monoenergetic and exponential function, where it is consistent with the MCNPX simulation results. Furthermore, the scattering of energetic electron beams toward the outer surface of the fuel for five various fuel density and two fast ignitor wavelengths of 0.53 and 0.35 micron have been investigated. The results show that for the fuel mass smaller than 2 mg, the scattering of electrons reduce for the electrons with smaller energies and fast ignitor of smaller wavelengths. Meanwhile, for the electrons with energy of the order ~3.5 MeV, two-temperature and monoenergetic energy distribution function deliver the highest and lowest energy to the main fuel and the central hot-spot, respectively.توان توقف و نفوذ الکترونهای پُر انرژی به درون سوخت چگال و لکهی داغ با در نظر گرفتن توزیع طیف انرژی الکترونهای داغ در رویکرد افروزش سریع- شوکی بررسی و عاملهای مؤثر بر پراکندگی باریکهی الکترونها مورد مطالعه قرار گرفت. محاسبههای تحلیلی نشان داد که الکترونهای نسبیتی با توزیع دو دمایی انرژی در مقایسه با توزیع نمایی انرژی و تک انرژی به میزان بیشتری به درون سوخت نفوذ میکنند و انرژی بیشتری را به لکهی داغ مرکزی تحویل میدهند که با نتیجههای حاصل از کد MCNPX سازگار است. همچنین پراکندگی الکترونها به سمت سطح خارجی سوخت جامد برای 5 مقدار چگالی سوخت و دو طول موج محرک افروزندهی سریع 0.53 و µm 0.35 مورد بررسی قرار گرفت که نتیجههای آن حاکی از کاهش مؤثر پراکندگی و شاخه شاخه شدن مسیر حرکت الکترونها با کاهش انرژی الکترونها و طول موج محرک افروزندهی سریع به ازای جرم سوخت کمتر از 2 میلیگرم است. همچنین الکترونهای با انرژی اولیهی MeV 3.5 ~ و طیف دو دمایی انرژی بیشترین و الکترونهای با طیف تک انرژی کمترین انرژی را به سوخت اصلی و لکهی داغ مرکزی انتقال میدهند.https://jonsat.nstri.ir/article_226_9d1b8081cfb86c5782271b1e82fbb9d5.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139320181122Spray System Assessment in Steel Containment of VVER-1000 Reactor with Using Probabilistic Methodsارزیابی سیستم پاشش آب در پوشش ایمنی رآکتور VVER-1000 با استفاده از روشهای احتمالاتی11311822710.24200/nst.2018.227FAداریوشمستیشرکت بهرهبرداری نیروگاه اتمی بوشهر، سازمان انرژی اتمی ایران، بوشهر ـ ایرانعلیخسروآبادیشرکت بهرهبرداری نیروگاه اتمی بوشهر، سازمان انرژی اتمی ایران، بوشهر ـ ایرانعلیرحمانی حقیقیشرکت بهرهبرداری نیروگاه اتمی بوشهر، سازمان انرژی اتمی ایران، بوشهر ـ ایرانJournal Article20171129One of the most important safety systems is spray system which is located in steel containment and has been designed to limit radioactive materials release, specially iodine, and to reduce the pressure and temperature in steel containment during events. The functions of mentioned system have been evaluated by the NPP designer by using probabilistic methods and the Risk Spectrum code. Some of the equipment, however, have not been simulated in the implemented modeling. In this article, by using the probabilistic analysis and the SAPHIRE code, the importance of the spray system’s elements in steel containment has been analyzed and the probability of system failures in various conditions has been calculated.یکی از سیستمهای مهم از نظر ایمنی، سیستم پاشش آب در پوشش ایمنی رآکتور است که در زمان حادثه برای محدود نمودن خروج مواد پرتوزا به ویژه ید از درون پوشش ایمنی رآکتور به بیرون و نیز کاهش فشار و دمای درون کرهی فلزی طراحی شده است. عملکرد این سیستم توسط طراح نیروگاه با روشهای احتمالاتی و با بهرهگیری از نرمافزار ریسک اسپکتروم ارزیابی شده است. در این مقاله با کمک تحلیل احتمالاتی و با استفاده از نرمافزار سفیر، احتمال خطای سیستم در حالتهای مختلف محاسبه شده است. از آنجا که برخی تجهیزها در مدلسازی انجام شده توسط پیمانکار مدل نشدهاند، اهمیت عناصر سیستم پاشش آب محفظهی فلزی رآکتور تحلیل شد و اهمیت تجهیزهای ذکر شده مورد ارزیابی قرار گرفت.https://jonsat.nstri.ir/article_227_18b3499132ff1952c79943740733ae40.pdf