پژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139420190220Imaging by the Use of Monochromatic X-Rays Induced by Proton Beamتصویرگیری با استفاده از پرتو ایکس تک انرژی پروتون- القایی11023310.24200/nst.2019.233FAنعیمهفرجی پور قهرودگروه فیزیک، دانشگاه پیام نور، صندوق پستی: 3697-19395، تهران ـ ایرانامیدرضاکاکوئیپژوهشکدهی فیزیک و شتابگرها، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایران، صندوق پستی: 1339-14155، تهران ـ ایران0000-0002-6728-308Xبهزادیداله زادهپژوهشکدهی فیزیک و شتابگرها، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایران، صندوق پستی: 1339-14155، تهران ـ ایرانJournal Article20170903In this research work, commissioning of a radiography end station using proton-induced monochromatic X-rays in the Van de Graaff laboratory of Nuclear Science and Technology Research Institute (NSTRI) is reported. An energetic proton beam with a current of hundreds of nanoamps after passing through the relevant slits in the beam path, is used to irradiate a metallic target leading to the generation of monochromatic X-rays. By altering the target, a wide variety of monochromatic X-rays with different wavelengths could be generated. The yield of characteristic proton-induced X-ray emission is measured using a Silicon Drift Detector (SDD). The generated X-rays could then pass through the window of the reaction chamber and irradiate the sample of interest. In this way, the required conditions for radiography by the “K-edge contrast imaging” could be provided. By implementing the mentioned analytical technique, using the K-edge absorption of the interest element in the sample, radiographic image contrast could be improved for different samples of cultural heritage such as manuscripts, clothes, and coins in the Van de Graaff lab of NSTRI.این مقاله، راه<strong></strong>اندازی جایگاه انجام آزمایش پرتونگاری با استفاده از پرتو ایکس تک انرژی پروتون- القایی در آزمایشگاه واندوگراف پژوهشگاه علوم و فنون هسته<strong></strong>ای را گزارش میکند. باریکهی پروتون پرانرژی با شدت جریان چند صد نانو آمپر ضمن عبور از روزنه<strong></strong>های مناسب در مسیر باریکه با یک هدف فلزی برخورد و پرتو ایکس تک انرژی ایجاد می<strong></strong>کند. با<br />تغییر هدف، تنوع گسترده<strong></strong>ای از پرتو ایکس تک انرژی با طول موجهای مختلف قابل حصول است. بهرهی تولید پرتو ایکس مشخصهی پروتون- القایی با استفاده<br />از یک آشکارساز SDD اندازهگیری میشود. با عبور پرتو ایکس از پنجرهی محفظه و برهمکنش آن با نمونهی مورد نظر، شرایط لازم برای پرتونگاری با «تصویرگیری کنتراست لبهی K» فراهم می<strong></strong>شود. با راهاندازی روش آنالیز بیان شدهی استفادهکننده از جذب لبهی K عنصر مورد نظر در نمونه، امکان بهبود کنتراست تصویر پرتونگاری نمونههای مختلف میراث فرهنگی نظیر نمونههای نوشتاری، پارچه و سکه در آزمایشگاه واندوگراف پژوهشگاه علوم و فنون هستهای فراهم شده است.https://jonsat.nstri.ir/article_233_f9da0a8ac693f2ad79d7e39df7a412ef.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139420190220Fabrication of a T Shape Microfluidic Chip on PMMA by Laser Ablation and Weldingساخت تراشهی ریزشارهی T شکل در پلیمر پلیمتیل متاآکریلات از طریق کندگی و جوش لیزری112023110.24200/nst.2019.231FAهدیهپازکیانپژوهشکدهی فوتونیک و فنآوریهای کوانتومی، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایران، صندوق پستی: 13-14399511، تهران ـ ایرانساراصفاییگروه اتمی مولکولی، دانشکدهی فیزیک، دانشگاه علم و صنعت ایران، صندوق پستی: 13114-16846، تهران ـ ایرانحسینامیریپژوهشکدهی فوتونیک و فنآوریهای کوانتومی، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایران، صندوق پستی: 13-14399511، تهران ـ ایرانمحمودملاباشیگروه اتمی مولکولی، دانشکدهی فیزیک، دانشگاه علم و صنعت ایران، صندوق پستی: 13114-16846، تهران ـ ایرانJournal Article20171105Microfluidic chips are commonly used in many industrial and nuclear medicine applications. The biomolecules are labeled with radio nucleoids for increasing the image resolution in nuclear imaging. Labeling of biomolecules with radio nucleoids is an important subject in recent applications of the microfluidic chips. In this paper fabrication of a T-shape microfluidic chip on Polymethylmethacrylate (PMMA) polymer was investigated. The effect of the experimental parameters such as scanning velocity, pulse repetition rate, and laser fluences on the dimensions and the quality of the microchannels were investigated. A two-dimensional T-shape microchannel was fabricated on a PMMA sheet of 1cm×1cm×0.5cm, under the optimum experimental conditions. A polymer sheet with 2D-microchannels was welded to another PMMA sheet with laser welding for the formation of a 3-dimensional microfluidic chip. Two-dimensional microchannels were fabricated with CO<sub>2</sub> and second harmonic of Nd:YAG lasers, both in pulsed mode of operation. Continues and pulse CO<sub>2</sub> lasers were both used for welding and formation of three-dimensional microchannelsتراشههای ریزشاره کاربردهای زیادی در صنایع مختلف به ویژه پزشکی و تصویرگیری هستهای دارند. در فرایند تصویرگیری، زیستمولکولهای نشاندار شده با رادیوایزوتوپها به عنوان عاملهای وضوح تصویر برای تشخیص بیماری استفاده میشود. نشاندارسازی زیستمولکولها با استفاده از رادیونوکلیدها از جملهی کاربردهای مهم و اخیر تراشههای ریزشاره است. این مقاله ساخت تراشهی سادهی آزمایشگاهی حاوی ریزکانال سه بعدی T شکل روی پلیمر پلیمتیل متاآکریلات (PMMA) را با استفاده از کندگی و جوش لیزری گزارش <br /> میکند. بدینمنظور ابتدا با استفاده از کندگی لیزری ریزکانالهای دوبعدی با ابعاد و کیفیت متفاوت روی سطح پلیمر ایجاد شد. به منظور دستیابی به بهترین نسبت ابعادی برای ریزکانال اثر پارامترهای ماشینکاری از جمله سرعت پایش، نرخ تکرار و شاریدگی روی ابعاد و کیفیت کانالها مورد بررسی قرار گرفته و شرایط بهینه برای ایجاد کانال مورد بررسی قرار گرفت. ریزکانال دو بعدی T شکل با استفاده از شرایط بهینهی به دست آمده، روی سطح پلیمری به ابعاد 1cm×1cm×0.5cmایجاد شد. پلیمر حاوی ریزکانالهای دوبعدی T شکل با لایهی دیگری از پلیمر پلیمتیل متاآکریلات توسط لیزر جوش داده شد. ریزکانالهای دوبعدی روی سطح پلیمر با استفاده از لیزرهای تپی CO<sub>2</sub> و هارمونیک دوم لیزر Nd:YAG ایجاد و برای اتصال از لیزر CO<sub>2</sub> تپی و پیوسته استفاده شد.https://jonsat.nstri.ir/article_231_4cff907491084161d6977756d1603985.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139420190220Effect of Pickling and Anodizing on Corrosion Behavior of VVER fuel Cladsتأثیر عملیات اسیدشویی و آندی کردن بر رفتار خوردگی غلافهای سوخت VVER213122910.24200/nst.2019.229FAمهدیدادفرشرکت سوره، سازمان انرژی اتمی ایران، صندوق پستی: 1957-81465، اصفهان ـ ایرانمرتضیانصاری پورشرکت سوره، سازمان انرژی اتمی ایران، صندوق پستی: 1957-81465، اصفهان ـ ایرانامینحیدرپورشرکت سوره، سازمان انرژی اتمی ایران، صندوق پستی: 1957-81465، اصفهان ـ ایرانزهراآراستهشرکت سوره، سازمان انرژی اتمی ایران، صندوق پستی: 1957-81465، اصفهان ـ ایرانJournal Article20180127Recently, it has been declared that fuel rods do not need to be anodized for the usage in VVER reactors. In this regard, some studies were planned to investigate the effects of pickling and anodizing treatments on corrosion behaviour of the fuel clads produced by Sooreh company. For this reason, different surface treated samples of as-received, grinded, pickled, grinded and anodized, and pickled and anodized were prepared. The Russian fuel clads in some equal conditions were also employed for comparisons. The results revealed that corrosion behaviour is completely effected by the surface treatment, and microstructure properties have less impact. The oxidation type in the pickled, and pickled and anodized samples are absolutely different from the grinded samples. The anodizing treatment after pickling nearly increases the corrosion resistance by two times in comparison to just pickled ones. The presence of grey oxide layer on the grinded samples are attributed to Monoclinic zirconia which has less corrosion resistance to Tetragonal zirconia.اخیراً استفاده از آلیاژ زیرکنیم- نیوبیم آندی نشده به عنوان غلاف میلههای سوخت VVER-1000ها مطرح شده است. در این راستا، به منظور بررسی تأثیر عملیات اسیدشویی و آندی کردن بر رفتار خوردگی غلافهای تولید شده در شرکت سوخت رآکتورهای هستهای (سوره) مطالعههایی انجام شد. غلاف سوخت Nb%1-Zr در شرکت سوره در شرایط مختلف بدون عملیات سطحی، سنباده خورده و اسیدشویی شده؛ سنباده خورده و آندی شده، اسیدشویی و آندی شده تولید شد. نمونههای مرجع نیز در حالتهای مختلف برای مقایسهی بهتر نتیجهها مورد استفاده قرار گرفتند. از دستگاه مختصات ابعادی (CMM) برای اندازهگیری ابعاد، میکروسکوپ الکترون پویشی (SEM) برای تعیین ضخامت لایهی اکسیدی، پراش پرتو ایکس (XRD) برای تعیین ماهیت لایهی اکسیدی و اتوکلاو برای تعیین میزان خوردگی استفاده شد. یافتهها نشان داد که خوردگی به شدت متأثر از عملیات سطحی انجام شده روی نمونهها است و ریزساختار در درجهی دوم اهمیت قرار دارد. نوع اکسایش بعد از عملیات اسیدشویی یا اسیدشویی و آندی کردن کاملاً متفاوت از نوع اکسایش نمونههای سنباده خورده است. فرایند آندی کردن بعد از عملیات اسیدشویی تقریباً مقاومت خوردگی را نسبت به نمونهای که تنها اسیدشویی شده است تا دو برابر بهبود بخشید. وجود لایهی اکسیدی خاکستری روی نمونههای سنباده خورده به حضور غالب فاز زیرکنیای مونوکلینیک نسبت داده میشود که مقاومت خوردگی کمتری نسبت به فاز چهارگوشهای دارد.https://jonsat.nstri.ir/article_229_35c21561978fd105e9e79f622ffa10f4.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139420190220Comparison of the Effect of Absorbed Dose on Recurrence of Tumors in External Beam Radiation and Targeted Therapyمقایسهی تأثیر دز جذبی در دو شیوهی پرتودرمانی خارجی و هدفمند بر عود دوبارهی تومور323823210.24200/nst.2019.232FAحسنرنجبرپژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایران، صندوق پستی: 8486-11365، تهران ـ ایرانفرشتهفریدیگروه فیزیک هستهای، دانشکدهی فیزیک، دانشگاه دامغان، صندوق پستی: 41167-36716، دامغان ـ ایرانمجتبیتاجیکگروه فیزیک هستهای، دانشکدهی فیزیک، دانشگاه دامغان، صندوق پستی: 41167-36716، دامغان ـ ایرانJournal Article20170910<span style="font-size: small;"><span style="font-family: Times New Roman;">Radiotherapy is the treatment of cancer using ionizing radiation. When a tumor is large in comparison to the range of the ionizing particles, most of the energy is absorbed within the tumor. In cases when the tumor dimensions are smaller than the range of ionizing particles, a large proportion of the energy can escape. Therefore, the tumor size and the range of the ionizing particles are important to be realized in the recurrence probability of tumors. The purpose of this study is to investigate the relationship of recurrence probability to tumor size and paricles energy in external radiotherapy and targeted radionuclide therapy. The absorbed fractions for spheres that ranged in radii from 20 µm to 4.5 cm were calculated using the MCNPX code. A mathematical model based on Poisson distribution was used to investigate the relationship of recurrence probability to tumor size for tumors treated with external beam radiotherapy and targeted <sup>131</sup>I and <sup>90</sup>Y. The results show that for targeted radionuclide therapy, the relationship between the recurrence probability and tumor size is different from that for external beam radiotherapy. The analysis shows that there is a minimum value of the recurrence probability that occures at a diameter of approximately 3.5 cm for <sup>90</sup>Y. For <sup>131</sup>I, the minimum recurrence occurs at a tumor diameter of approximately 3.5 mm. The results show that there is an optimal tumor size for the tumor curability. The recurrence probability has a minimum value for tumors whose diameters are close to the optimum value which depends on the particles energy. Smaller tumors are more recurrence because of the incompetent absorption of radiation energy, i.e., it dose not occure with the external beam iiradiation, and larger tumors are more recurrence because of the greater cell number. The results are shown that single agent targeted radiotherapy should not be used for treatment of disseminated cancers when multiple tumors of differing size may be present. The use of several radionuclides, including long-range and short-range beta emitters, concurrently or from combining targeted radiotherapy with external beam irradiation would be more effective than the reliance on a single radionuclide.</span></span> <br /><span style="font-family: Times New Roman; font-size: small;"> </span> <br /> <span style="font-size: small;">زمانیکه اندازهی تومور در مقایسه با برد ذرههای یوننده، بزرگ باشد بیشتر انرژی ذرهها در آن جذب میشود و اگر کوچکتر باشد مقدار زیادی از انرژی ذرهها خارج خواهد شد. بنابراین اندازهی تومور و برد ذرههای یوننده نقش مهمی در عود دوبارهی تومور خواهند داشت. هدف این پژوهش بررسی ارتباط احتمال عود دوبارهی تومور با اندازهی تومور و انرژی ذرهها در پرتودرمانی خارجی و هدفمند است. کسر دز جذبی برای کرههایی به شعاع </span><span style="font-family: Times New Roman;">µm</span><span style="font-size: small;"> 20 تا </span><span style="font-family: Times New Roman;">cm</span><span style="font-size: small;"> 4.5 با استفاده از کد </span><span style="font-family: Times New Roman;">MCNPX</span><span style="font-size: small;"> محاسبه شد. به منظور بررسی رابطهی بین عود دوبارهی تومور و اندازهی تومور درمان شده با پرتودرمانی خارجی و هدفمند با ید-131 و ایتریم-90، از یک مدل ریاضی مبتنی بر آمار پواسون استفاده شد. تحلیلها نشان داد که احتمال عود دوباره برای پرتودرمانی با ایتریم-90 برای تومورهای به قطر تقریباً </span><span style="font-family: Times New Roman;">cm</span><span style="font-size: small;"> 3.5 کمینه است در حالیکه برای پرتودرمانی با ید-131 این احتمال برای تومورهای به قطر تقریباً </span><span style="font-family: Times New Roman;">mm</span><span style="font-size: small;"> 3.5 کمینه است. از یافتهها میتوان نتیجه گرفت که پرتودرمانی هدفمند با یک تک- رادیونوکلید نباید برای بیماران سرطانی دارای متاستازهای با اندازههای مختلف و یا سرطانهای گسترشیافته مورد استفاده قرار گیرد. استفاده از چند رادیونوکلید به طور همزمان یا ترکیب پرتودرمانی هدفمند با پرتودرمانی خارجی، میتواند اثربخشی بیشتری نسبت به استفاده از یک تک رادیونوکلید داشته باشد.</span>https://jonsat.nstri.ir/article_232_162a7a41f9a2a5a0de3ee4b62768f5ce.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139420190220Experimental Investigation of Effective Parameters in Thermal Decomposition of Thorium Oxalateبررسی تجربی پارامترهای مؤثر بر فرایند تجزیهی گرمایی توریم اگزالات395024810.24200/nst.2019.248FAعلییداللهیپژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایران، صندوق پستی: 8486-11365، تهران ـ ایرانامیرچرخیپژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایران، صندوق پستی: 8486-11365، تهران ـ ایرانمیثمتراب مستعدیپژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایران، صندوق پستی: 8486-11365، تهران ـ ایرانJournal Article20161129<span style="font-size: small;"><span style="font-family: Times New Roman;">In this study, the thermal decomposition of thorium oxalate dihydrate (Th(C<sub>2</sub>O<sub>4</sub>)<sub>2</sub>. 2H<sub>2</sub>O) was investigated by using design of experiment- technique. The thermal decomposition experiments were carried out in a two- temperature procedure and the influence of the decomposition temperature of the second step, as well as, durations of both steps on the crystallinity, size, size distribution, morphology and specific surface area of the produced thorium oxide were investigated. For this purpose the experiments were designed by using Taguchi method. The results showed that the optimum decomposition temperature and duration of the first and second heating stages were 400 °C for 4 hours and 750 °C for 4 hours, respectively. The powder characterization showed that the cubic thorium oxideparticles synthesized in the optimal conditions had uniform size distribution with an approximate size of 350 nanometers. Moreover, the crystallinity of ThO<sub>2</sub> phase and specific surface area of these particles were 95% and 35.23(m<sup>2</sup> g<sup>-1</sup>), respectively.</span></span><span style="font-size: small;">این مقاله فرایند تجزیهی گرمایی توریم اگزالات آبدار را با استفاده از روش طراحی آزمایش مورد بررسی قرار میدهد. فرایند تجزیهی گرمایی طی دو مرحله گرمادهی انجام شد و تأثیر پارامترهای زمان گرمادهی مرحلهی اول، دما و زمان گرمادهی مرحلهی دوم بر بلورینگی فازی، اندازه، توزیع اندازه، ریختشناسی و مساحت سطح ویژهی توریم اکسید تولید شده مورد بررسی قرار گرفت. برای این منظور آزمایش<span style="font-family: Times New Roman;"></span>های مورد نظر به روش تاگوچی طراحی شد. بررسیها نشان داد که دمای 400 درجهی سلسیوس، زمان 4 ساعت، دمای 750 درجهی سلسیوس و زمان 4 ساعت به ترتیب، شرایط بهینه برای مرحلهیهای اول و دوم گرمادهی بودند. نتیجههای مشخصهیابی پودر تولید شده در شرایط بهینه نشان داد که ذرههای توریم اکسید، مکعبیشکل با توزیع یکنواخت و اندازهی متوسط 350 نانومتر بوده و درصد بلورینگی فاز <sub>2 </sub><span style="font-family: Times New Roman;">ThO</span>و مساحت سطح ویژهی ذرهها به ترتیب برابر با %95 و (<sup>1-</sup><span style="font-family: Times New Roman;">g</span> <sup>2</sup><span style="font-family: Times New Roman;">m</span>) 35.23است.</span>https://jonsat.nstri.ir/article_248_90e314df89f68751bd98f50585628cd9.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139420190220Selective Extraction of Yttrium (III) in Aqueous Media Using Liquid Membraneاستخراج انتخابی ایتریم (III) در محیطهای آبی با غشای مایع516323710.24200/nst.2019.237FAرضاداورخواهپژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایران، صندوق پستی: 8486-11365، تهران ـ ایرانبهرامسلیمیپژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایران، صندوق پستی: 8486-11365، تهران ـ ایرانمریمتوسلیپژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایران، صندوق پستی: 8486-11365، تهران ـ ایرانفاضلضحاکیفرپژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایران، صندوق پستی: 8486-11365، تهران ـ ایرانالمیرافرهمنداصلدانشکدهی مهندسی انرژی، دانشگاه صنعتی شریف، صندوق پستی: 8639-11365، تهران ـ ایرانمحمدصمدفامدانشکدهی مهندسی انرژی، دانشگاه صنعتی شریف، صندوق پستی: 8639-11365، تهران ـ ایرانپریساظاهریپژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایران، صندوق پستی: 8486-11365، تهران ـ ایرانJournal Article20170712<span style="font-size: small;"><span style="font-family: Times New Roman;">2-Thenoyltrifluoroacetone (HTTA) has been proposed as a carrier in organic phase for the transport and selective extraction of yttrium using bulk liquid membrane system. The liquid membrane was prepared by dissolving HTTA in dichloromethane. It has been observed that the use of n-propylamine (n-PA) in source phase as a synergistic agent causes an enhancement in transport of yttrium ions. The extraction and stripping conditions have entirely been evaluated and described. The proposed method has been utilized for the separation of yttrium (III) from its binary mixtures with strontium (II) and some other cations such as Ni (II), Co (II), Ag (I), Fe (II), Al (III), Cu (II), Hg (II) and Cs(I) in aqueous solutions of pH 5.4 in the presence of n-PA, while 1M nitric acid was serving as a stripping agent in the receiving compartment. Cyanide ion and 5-sulfosalicylic acid have been used as masking agents to minimize the interferences from different transition metal ions and Al (III) in source phase,respectively.At the achieved optimized conditions and a discrete experiment, <sup>90</sup>Y in secular equilibrium with <sup>90</sup>Srin the source phase, was transferred into receiving phase and separated completely from its long-lived parent isotope.</span></span> <br /><span style="font-family: Times New Roman;"> </span> <br /><strong><em><span style="font-size: small;"> </span></em></strong><span style="font-size: small;">2- تنوئیل تری فلوئورواستن <span style="font-family: Times New Roman;">(HTTA)</span> در دی کلرومتان به عنوان حامل برای استخراج انتخابی و انتقال ایتریم به کمک سیستم غشای مایع استفاده شد. یافتهها نشان داد که به کارگیری نرمالپروپیلآمین <span style="font-family: Times New Roman;">(n-PA)</span> در فاز دهنده موجب افزایش استخراج یونهای ایتریم میشود. شرایط فرایندهای استخراج و عریانسازی به لحاظ تجربی کاملاً ارزیابی و توصیف شدهاند. روش پیشنهادی برای جداسازی ایتریم </span><span style="font-family: Times New Roman;">(III)</span><span style="font-size: small;"> از مخلوطهای دوتایی آن با استرانسیم </span><span style="font-family: Times New Roman;">(II)</span><span style="font-size: small;"> و برخی کاتیونهای دیگر نظیر </span><span style="font-family: Times New Roman;">Cu (II)</span><span style="font-size: small;">، </span><span style="font-family: Times New Roman;">Co (II)</span><span style="font-size: small;">، </span><span style="font-family: Times New Roman;">Ni (II)</span><span style="font-size: small;">، </span><span style="font-family: Times New Roman;">Fe (II)</span><span style="font-size: small;">، </span><span style="font-family: Times New Roman;">Ag (I)</span><span style="font-size: small;">، </span><span style="font-family: Times New Roman;">Al (III)</span><span style="font-size: small;">، </span><span style="font-family: Times New Roman;">Hg (II)</span><span style="font-size: small;">و </span><span style="font-family: Times New Roman;">Cs (I)</span><span style="font-size: small;"> در محلولهای آبی با 5.4 </span><span style="font-family: Times New Roman;">pH</span><span style="font-size: small;"> و در حضور <span style="font-family: Times New Roman;">n-PA</span> به کار گرفته شد. از نیتریک اسید <span style="font-family: Times New Roman;">M</span> 1 به عنوان عریانساز در فاز گیرنده استفاده شد. مزاحمت ناشی از یونهای فلزهای واسطه<span style="font-family: Times New Roman;"></span>ی گوناگون و <span style="font-family: Times New Roman;">(III)</span> <span style="font-family: Times New Roman;">Al</span> به ترتیب با استفاده از یون سیانید و 5- سولفوسالیسیلیک اسید به عنوان عامل<span style="font-family: Times New Roman;"></span>های استتارگر در فاز دهنده به حداقل مقدار خود رسانده شد. تحت شرایط بهینه<span style="font-family: Times New Roman;"></span>ی به دست آمده و در آزمایش انتقال جداگانهای، <span style="font-family: Times New Roman;">Y</span><sup>90 </sup>که در تعادل با <span style="font-family: Times New Roman;">Sr</span><sup>90</sup> در فاز دهنده قرار داشت، به طور کامل به فاز گیرنده انتقال داده شد و از ایزوتوپ مادرِ عمر- طولانی خود جدا گردید.</span><br /> https://jonsat.nstri.ir/article_237_6fad4c1ffdf1d7bf3d465c794ffde0c5.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139420190220Kinetic, Thermodynamic and Adsorption Mechanism of Uranium (VI) Ions from Aqueous Solutions Using Mg/Al Layered Double Hydroxideسینتیک، ترمودینامیک و سازوکار جذب یونهای اورانیم (VI) از محلولهای آبی با استفاده از هیدروکسید لایهای دوگانهی منیزیم- آلومینیم647422810.24200/nst.2019.228FAاحمددربان خدادادیگروه فرآوری مواد معدنی، دانشکدهی فنی و مهندسی، دانشگاه تربیت مدرس، صندوق پستی: 111-14115، تهران ـ ایرانحسنصدیقیگروه فرآوری مواد معدنی، دانشکدهی فنی و مهندسی، دانشگاه تربیت مدرس، صندوق پستی: 111-14115، تهران ـ ایرانجوادفصیحیپژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایران، صندوق پستی: 8486-11365، تهران ـ ایرانمحمد جوادکلینیگروه فرآوری مواد معدنی، دانشکدهی فنی و مهندسی، دانشگاه تربیت مدرس، صندوق پستی: 111-14115، تهران ـ ایرانJournal Article20170611<span style="font-size: small;"><span style="font-family: Times New Roman;">Layered double hydroxide (Mg/Al; 3:1) was synthesized by co-precipitation method and used to adsorb uranium from aqueous solutions. Various environmental parameters such as contact time, pH, initial uranium concentration and temperature were investigated. The maximum adsorption capacity occurred at pH=3 (99 mg/g). The adsorption of U(VI) onto LDH decreased with increasing pH at pH>6.5, because of the formation uranyl carbonate complexes (69 mg/g). The thermodynamic parameters (i.e., ΔH0, ΔS0 and ΔG0) indicated that the adsorption process of U(VI) on LDH was an endothermic and spontaneous process. At pH<6.5, the probable mechanism of adsorption of U(VI) was governed by inner-sphere surface complexation with OH groups on LDH surfaces, while the dominant mechanism at pH>6.5 was inner-sphere surface complexation</span> <span style="font-family: Times New Roman;">and ion exchange with NO<sub>3¯</sub>. Based on the experimental results, LDH is a very suitable material for the removal of U(VI) ions from aqueous solutions in a wide range of pH.</span></span> <br /><span style="font-family: Times New Roman; font-size: small;"> </span> <br /> <br /><strong><em><span style="font-family: Times New Roman; font-size: small;"> </span></em></strong><span style="font-size: small;">(با عرض پوزش به دلیل عدم دسترسی به تایپ فرمول لطفا اصل چکیده را از متن پی دی اف مطالعه فرمایید)</span><br /> <span style="font-size: small;"> هیدروکسید لایهای دوگانهی منیزیم- آلومینیم (3:1</span><span style="font-family: Times New Roman;">LDH Mg<sub>/</sub>Al;</span><span style="font-size: small;">) با روش همرسوبی ساخته شد و برای جذب اورانیم از محلولهای آبی مورد استفاده قرار گرفت. اثر پارامترهای محیطی مختلفی مانند </span><span style="font-family: Times New Roman;">pH</span><span style="font-size: small;">، غلظت اورانیم (</span><span style="font-family: Times New Roman;">VI</span><span style="font-size: small;">)، زمان تماس و دما بر فرایند جذب مورد بررسی قرار گرفت. بیشینه ظرفیت جذب (<sup>1-</sup></span><span style="font-family: Times New Roman;">mg g</span><span style="font-size: small;"> 99) در 3 </span><span style="font-family: Times New Roman;">pH</span><span style="font-size: small;"> رخ میدهد و با افزایش </span><span style="font-family: Times New Roman;">pH</span><span style="font-size: small;"> به بالاتر از 5<sub>/</sub>6 به دلیل تشکیل کمپلکسهای کربناتهی اورانیل کاهش مییابد (<sup>1-</sup></span><span style="font-family: Times New Roman;">mg g</span><span style="font-size: small;"> 69). پارامترهای ترمودینامکی (<sup>0</sup></span><span style="font-family: Times New Roman;">ΔH</span><span style="font-size: small;">، <sup>0</sup></span><span style="font-family: Times New Roman;">ΔS</span><span style="font-size: small;"> و <sup>0</sup></span><span style="font-family: Times New Roman;">ΔG</span><span style="font-size: small;">) مشخص کرد که فرایند جذب اورانیم (</span><span style="font-family: Times New Roman;">VI</span><span style="font-size: small;">) بر روی </span><span style="font-family: Times New Roman;">LDH</span><span style="font-size: small;"> گرماگیر و خود به خودی است. در </span><span style="font-family: Times New Roman;">pH</span><span style="font-size: small;">های پایینتر از 5<sub>/</sub>6، سازوکار غالب جذب اورانیم احتمالاً تشکیل کمپلکسهای سطحی درون- کرهای با گروههای </span><span style="font-family: Times New Roman;">OH</span><span style="font-size: small;"> در سطح </span><span style="font-family: Times New Roman;">LDH</span><span style="font-size: small;"> است، در حالی که در </span><span style="font-family: Times New Roman;">pH</span><span style="font-size: small;">های بالاتر از 5<sub>/</sub>6 تشکیل کمپلکسهای سطحی برون- کرهای و تبادل با یونهای <sup>-</sup><sub>3</sub></span><span style="font-family: Times New Roman;">NO</span><span style="font-size: small;"> در شبکهی </span><span style="font-family: Times New Roman;">LDH</span><span style="font-size: small;"> غالب است. براساس دادههای به دست آمده، </span><span style="font-family: Times New Roman;">LDH</span><span style="font-size: small;"> مادهای بسیار مناسب برای جذب یونهای اورانیم از محلولهای آبی در بازهی گستردهای از </span><span style="font-family: Times New Roman;">pH</span><span style="font-size: small;"> است.</span>https://jonsat.nstri.ir/article_228_5d33f59c29e5dd3a9abbf8062287a615.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139420190220Production and Modification of Poly(Styrene-Acrylonitrile)-Polycarbonate Nanofibers and Evaluation of its Adsorption Behavior on Uranium in Aqueous Solutionsتولید و اصلاح نانوالیاف پلیاستایرنآکریلونیتریل- پلیکربنات و بررسی رفتار جذبی آن نسبت به اورانیم در محیطهای آبی758423510.24200/nst.2019.235FAاحمدنادریدانشکدهی مهندسی شیمی، دانشگاه صنعتی اصفهان، صندوق پستی: 83111-84156، اصفهان ـ ایرانسیدمحمدقریشیدانشکدهی مهندسی شیمی، دانشگاه صنعتی اصفهان، صندوق پستی: 83111-84156، اصفهان ـ ایرانمحمودفیروززارعپژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایران، صندوق پستی: 8486-11365، تهران ـ ایران0000-0001-8438-9743محمدرضاالماسیانپژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایران، صندوق پستی: 8486-11365، تهران ـ ایرانJournal Article20170720The removal and recovery of uranium from aqueous media has been considered by many of scientists and researchers since a long time ago. In this work it has been tried to produce the nano adsorbent that be able to separate the uranium from nuclear waste waters and the other aqueous media. For this purpose poly(styrene-acrylonitrile) nanofibers and their composite with polycarbonate nanofibers have been prepared and used as adsorbent of uranium after chemical modification. The chemical modification was performed by the conversion of nitrile groups to amidoxime groups by hydroxyl amine solution and akaline treatment by sodium hydroxide 2.5%. The amidoximation was confirmed by infrared spectroscopy. The maximum capacities of uranium adsorption were 79.8 and 38.5 mg U<sub>/</sub>g ads for poly(styrene-acrylonitrile) and poly(styrene-acrylonitrile)<sub>/</sub>polycarbonate composite respectively. The optimum pH was 4 for uranium adsorption. The desorption yield was more than 90% in Na<sub>2</sub>CO<sub>3</sub> 1M <sub>/</sub>H<sub>2</sub>O<sub>2</sub> 1M solution.حذف و بازیابی اورانیم از محیطهای آبی از دیرباز مورد توجه دانشمندان و پژوهشگران این عرصه بوده است. در این پژوهش سعی شده است با تولید نانوجاذب نانوالیاف پلیاستایرن آکریلونیتریل و چندسازهی آن با پلیکربنات با روش نیروریسی و اصلاح شیمیایی آنها، امکان جداسازی اورانیم از پسآبهای هستهای و دیگر محیطهای آبی فراهم شود. اصلاح شیمیایی این نانوالیاف با تبدیل گروههای نیتریل به آمیدوکسیم در محلول هیدروکسیل آمین و سپس قلیایی کردن آنها در محلول سدیمهیدروکسید 2.5 درصد صورت پذیرفت. طیفبینی زیرقرمز، تبدیل <br />گروههای نیتریل به گروههای آمیدوکسیم را اثبات کرد. ظرفیت جذب بیشینه برای پلیاستایرنآکریلونیتریل برابر با 79.8 میلیگرم اورانیم بر گرم جاذب و برای چندسازهی آن با پلیکربنات برابر با 38.5 میلیگرم اورانیم بر گرم جاذب به دست آمد. با بررسی اثر pH محیط مشخص شد که بهترین عملکرد جذبی در 4 pH واقع میشود. در نهایت واجذب اورانیم از این جاذب با محلول 1 مولار Na<sub>2</sub>CO<sub>3</sub> و H<sub>2</sub>O<sub>2</sub> بررسی و بهرهی واجذب بیش از 90% تعیین شد.https://jonsat.nstri.ir/article_235_f4cf4784d277ff951fdc3c54e5f9b249.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139420190220Recovery and Purification of Uranium from Rejected-Prototype Fuel Plates with Use Innovative Methodبازیابی اورانیم از صفحههای سوخت بدل و تخلیص آن با روشهای رسوبگیری ترکیبی859223910.24200/nst.2019.239FAکاظمفاطمیشرکت سوره، سازمان انرژی اتمی ایران، صندوق پستی: 1957-81465، اصفهان ـ ایرانمحمدتقینژاد کردشرکت سوره، سازمان انرژی اتمی ایران، صندوق پستی: 1957-81465، اصفهان ـ ایرانمسعودحبیبیزارعشرکت سوره، سازمان انرژی اتمی ایران، صندوق پستی: 1957-81465، اصفهان ـ ایرانامیرحسینفرهادیشرکت سوره، سازمان انرژی اتمی ایران، صندوق پستی: 1957-81465، اصفهان ـ ایرانJournal Article20171216In nuclear research reactor fuel producing factories, in order to recover uranium from aluminum plate scraps of oxide fuel, the dissolving process in the caustic soda and nitric acid and, ultimately, the solvent extraction process for the purification of uranium from the UNH are used. In this research, the results of separation and purification of uranium from scraps of aluminum oxide fuel plates are reported in a new and different method and without the solvent extraction process. In this method, the virtual plate fuel fragments containing U3O8 were dissolved in caustic soda solution. Then, the suspension obtained from dissolution of the aluminum sheath, together with particles of U3O8 was reacted with 40% HF solution. The product obtained was subjected to heat treatment to oxidize its <strong>U<sup>+4 </sup></strong>by air oxygen. Next, the uranium in the product oxidized by the leaching process was leached and separated from the impurities and was precipitated in the form of the very pure compounds of AUC and ADU. These intermediaries were converted into pure U3O8 by calcination. The results of the analyzes show that U3O8 produced in this way have higher purity compared to U3O8 produced from pure UF6 as well as from U3O8 from defective actual oxide fuel plates which in scientific sources have been purified by the solvent extraction process from the UNH. At the same time, in this method two samples of pure U3O8 powder with grain size of 86% and 94% (above 45 microns) are also produced directly from ammonium bicarbonate leached solutions through formation of AUC sedimentation, the characteristics of which recommend the applicability of this method in terms of chemical purity and grain size of U3O8 produced for enriched uranium in a fuel plate manufacturing line.این مقاله جداسازی و تخلیص اورانیم از تهماندهای صفحههای آلومینیمی سوخت اکسیدی بدل به شیوهی رسوبگیری ترکیبی را گزارش میکند. در این روش ابتدا قطعههای صفحههای سوخت بدل حاوی U<sub>3</sub>O<sub>8</sub> در محلول سود حل و سوسپانسیون حاصل، با محلول 40 درصد HF وارد واکنش شد. محصول به دست آمده تحت عملیات گرمایی قرار گرفت تا اورانیم چهار ظرفیتی آن توسط اکسیژن هوا اکسید شود. در ادامه اورانیم، از ناخالصیها فروشویی و جداسازی و به شکل ترکیبهای خیلی خالص آمونیم اورانیل کربنات (AUC) و آمونیم دی اورانات (ADU) رسوب داده شد. این حد واسطها با عملیات تکلیس به <sub>8</sub>O<sub>3</sub>U خالص تبدیل شد. دادههای تجزیههای عنصری نشان داد که <sub>8</sub>O<sub>3</sub>U تولید شده با این روش در مقایسه با <sub>8</sub>O<sub>3</sub>U به دست آمده از UF<sub>6</sub> خالص و همچنین از U<sub>3</sub>O<sub>8</sub> تولید شده از صفحههای معیوب واقعی سوخت اکسیدی که با فرایند استخراج با حلال از محیط اورانیل نیترات هگزا هیدرات (UNH) در منابع علمی خالصسازی شدهاند، از خلوص بالاتری برخوردار است. همزمان دو نمونهی پودر U<sub>3</sub>O<sub>8</sub>خالص با دانهبندی 86 و 94 درصد بالای µm 45 مستقیماً از محلولهای فروشویی بیکربنات آمونیم با تشکیل رسوب آمونیم اورانیل کربنات نیز تولید شد که مشخصههای آنها قابلیت کاربرد این شیوه را از نظر خلوص شیمیایی و اندازهی دانهبندی U<sub>3</sub>O<sub>6</sub> تولید شده برای اورانیم غنی شده در خط تولید صفحههای سوخت تأیید مینماید.https://jonsat.nstri.ir/article_239_49ede2caefed079438adb359dbe9a47c.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139420190220The Effect of Peptone and Tryptic Soy Broth (TSB) on Uranium Bioleaching Efficiencyبررسی تأثیر پپتون و تریپتیک سوی براث (TSB) بر روی بازدهی زیستفروشویی اورانیم939923810.24200/nst.2019.238FAفائزهفاطمیپژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایران، صندوق پستی: 8486-11365، تهران ـ ایرانسمانهجهانیگروه میکروبیولوژی، دانشکدهی علوم، واحد قم، دانشگاه آزاد اسلامی، صندوق پستی: 3714668669، قم ـ ایرانسبامیری3. گروه بیوتکنولوژی، دانشکدهی علوم زیستی، دانشگاه الزهرا، صندوق پستی: 1993893973، تهران ـ ایرانJournal Article20180220One of the main challenges in uranium bioleaching process is events related to improvement, acceleration and enhancement of the extraction. One of these is to provide a favorable environment and biological conditions for <em>Acidithiobacillus ferrooxidans</em>. Whereas, the nutrients of bacteria medium have a significant impact on the activity and growth of bacteria, in the present study, 2 selective culture mediums were used in uranium bioleaching process at pulp densities of 2.5 and 12.5 %. The mediums are containing usual 9k and enriched 9k medium with peptone and TSB (Tryptic Soy Broth). Uranium bioleaching process using selective 2 mediums with different pulp densities were performed under optimum conditions. The results indicated that the uranium extraction at 2.5% pulp density, using 9k-New medium and 9k medium, have carried out during 2 and 3 days, respectively. In addition, at 12.5 % pulp density, the total uranium in the ore was extracted during 3 and 7 days using 9k-New and 9k mediums, respectively. Eh variations showed that the Eh in the 9k-New medium in compared with 9k medium were increased 13-22%. According to the results of this study, it can be concluded that the uses of nutrients such as peptone and TSB have significant impact on the activity of bacteria and also speed of uranium extraction. So, the optimization of 9k medium using peptone and TSB recommended on the uranium bioleaching process.یکی از چالشهای اساسی در رابطه با زیستفروشویی اورانیم، انجام اقدامهایی برای بهبود، تسریع و افزایش بازدهی فرایند استخراج است. از جملهی این اقدامها، فراهم نمودن شرایط محیطی و زیستشناختی مطلوب برای باکتری <em>اسیدی تیوباسیلوس فرواکسیدان</em> است. از آنجایی که مواد مغذی محیط کشت باکتری تأثیر بسزایی بر روی عملکرد و رشد باکتری پیشگفته دارد، از اینرو، در پژوهش حاضر از 2 محیط کشت مجزا در فرایند زیستفروشویی اورانیم در چگالی پالپهای 2.5 و 12.5 درصد، به صورت مقایسهای، استفاده شده است. محیط کشتهای انتخابی شامل محیط کشت متعارف 9k و محیط کشت غنی شدهی 9k با پپتون و تریپتیک سوی براث (TSB) است. فرایند زیستفروشویی اورانیم با استفاده از این 2 محیط کشت و چگالی پالپهای انتخابی در شرایط بهینه انجام پذیرفت. نتیجههای حاصل از چگالی پالپ 2.5 درصد نشان داد که استخراج اورانیم با استفاده از محیط کشت 9k جدید، 2 روز و با استفاده از محیط کشت 9k، متعارف 3 روز به طول انجامید. همچنین، کل اورانیم موجود در سنگ در چگالی پالپ 12.5 درصد با استفاده از محیط کشت 9k جدید و 9k متعارف به ترتیب در مدت 3 و 7 روز استخراج شد. میزان تغییرات Eh با استفاده از 2 محیط کشت و چگالی پالپهای انتخابی نشان داد که مقدار Eh در محیط کشت 9k جدید به نسبت 9kبه میزان 13 تا 22 درصد افزایش داشته است. با توجه به دادههای تجربی به دست آمده در این پژوهش میتوان نتیجه گرفت که استفاده از مواد مغذی همچون پپتون و تریپتیک سوی براث تأثیر بسیار زیادی بر روی عملکرد و فعالیت باکتری و در نتیجه سرعت استخراج اورانیم داشته است و با بهینهسازی شرایط، استفاده از محیط کشت 9kبه همراه پپتون و تریپتیک سوی براث در فرایند زیستفروشویی اورانیم توصیه میشود.https://jonsat.nstri.ir/article_238_d4567edebb8ed8d08056fc296c70d4cd.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139420190220Evaluation of several important defense enzyme activities in mutant rice resistant to blast diseaseارزیابی فعالیت برخی از آنزیمهای دفاعی مهم در برنج جهشیافتهی مقاوم به بیماری بلاست10010823610.24200/nst.2019.236FAداریوشعبادی الماسگروه اصلاح نباتات و بیوتکنولوژی، دانشکدهی تولید گیاهی، دانشگاه علوم کشاورزی و منابع طبیعی گرگان، صندوق پستی: 15739-49138، گرگان ـ ایرانسعیدنوابپورگروه اصلاح نباتات و بیوتکنولوژی، دانشکدهی تولید گیاهی، دانشگاه علوم کشاورزی و منابع طبیعی گرگان، صندوق پستی: 15739-49138، گرگان ـ ایراناحدیامچیگروه اصلاح نباتات و بیوتکنولوژی، دانشکدهی تولید گیاهی، دانشگاه علوم کشاورزی و منابع طبیعی گرگان، صندوق پستی: 15739-49138، گرگان ـ ایرانخلیلزینلینژادگروه اصلاح نباتات و بیوتکنولوژی، دانشکدهی تولید گیاهی، دانشگاه علوم کشاورزی و منابع طبیعی گرگان، صندوق پستی: 15739-49138، گرگان ـ ایرانعلیمومنیمؤسسهی تحقیقات برنج کشور، معاونت مازندران، سازمان تحقیقات، آموزش و ترویج کشاورزی، صندوق پستی: 91951-46191، آمل ـ ایرانقادرمیرزاقادریگروه زراعت و اصلاح نباتات، دانشکدهی کشاورزی، دانشگاه کردستان، صندوق پستی: 15175-66177، سنندج ـ ایرانJournal Article20170706Blast disease, caused by fungus <em>Magnaporthe grisea</em> (Hebert) Barr, with asexual form <em>Pyricularia grisea</em> (Cooke) Sacc, is the main fungal disease of rice in the tropical and temperate regions of the world and Iran. Mutant plants derived from mutation breeding due to having the same genetic background with their wild-type are useful experimental material for comparative analysis and dissecting molecular mechanisms. For this purpose, seeds of two rice genotypes including mutant variety (Pooya) and its wild-type parent cultivar (Mosatarom) were prepared from Rice Research Institute of Iran and used in greenhouse tests. Evaluation of resistance components showed that Pooya mutant variety was resistant and Mosatarom cultivar was susceptible. Biochemical analysis under control and inoculated conditions revealed that enzyme activities of catalase, peroxidase, polyphenol oxidase in the Pooya mutant variety was more than, while TBARM index was lower than Mosatarom cultivar. According to the positive role of defense enzymes in controlling disease progression, Pooya mutant variety had better than its wild-type parent cultivar against blast disease due to the maximum defense enzyme activity.بیماری بلاست، که توسط قارچ مگناپورت گریسیا، با فرم غیرجنسی پریکولاریا گریسیا، ایجاد میشود از مهمترین بیماریهای قارچی برنج در منطقههای گرمسیری و معتدل دنیا و همچنین ایران است. گیاهان جهشیافتهی حاصل از اصلاح جهشی به دلیل داشتن زمینهی ژنتیکی یکسان با والدشان، مواد آزمایشی مناسبی برای تجزیههای مقایسهای و تشریح سازوکارهای مولکولی هستند. بدین منظور در آزمایشیبذرهای دو ژنمانهی برنج شامل رقم جهشیافتهی (پویا) و رقم والد مربوط به آن (موسیطارم) از مؤسسهی تحقیقات برنج ایران تهیه شده و در آزمایشهای گلخانهای مورد استفاده قرار گرفتند. ارزیابی مؤلفههای مقاومت نشان داد که رقم جهشیافتهی پویا دارای نوع مقاوم و رقم موسیطارم دارای نوع حساس هستند. بررسیهای زیستشیمیایی در شرایط کنترل و القای بیماری نشان داد که میزان فعالیت آنزیمهای کاتالاز، پراکسیداز و پلیفنول اکسیداز در رقم جهشیافتهی پویا بیشتر از رقم موسیطارم بود، درحالیکه میزان اکسایش سلولی کمتری نسبت به آن داشت. با توجه به نقش مثبت آنزیمهای دفاعی در کنترل پیشرفت بیماری بلاست، رقم جهشیافتهی پویا با فعالیت بیشتر آنزیمهای دفاعی وضعیت بهتری نسبت به رقم والد خود نشان داد که بیانگر مقاومت آن در برابر بیماری بلاست است.https://jonsat.nstri.ir/article_236_136b8713a90b09a4635ddf474c7ab6b9.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187139420190220Design calculation of a vertical thermal neutron beam for neutron radiography at Esfahan MNSRطراحی باریکهی نوترون گرمایی عمودی در رآکتور مینیاتوری اصفهان به منظور پرتونگاری نوترونی10911723410.24200/nst.2019.234FAجمشیدخورسندیپژوهشکدهی راکتور و ایمنی هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایران، صندوق پستی: 1589-81465، اصفهان ـ ایرانافروزعسگریپژوهشکدهی راکتور و ایمنی هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایران، صندوق پستی: 1589-81465، اصفهان ـ ایرانپروینکاویانیپژوهشکدهی راکتور و ایمنی هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایران، صندوق پستی: 1589-81465، اصفهان ـ ایرانجوادمختاریپژوهشکدهی راکتور و ایمنی هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایران، صندوق پستی: 1589-81465، اصفهان ـ ایرانJournal Article20171129In this paper, the MCNPX code is applied for feasibility study of using the Isfahan MNSR as a neutron source for neutron radiography. To produce a good neutron beam in terms of intensity and quality, the aluminum (Al) with thickness of 0.7 cm, and bismuth (Bi) and lead (Pb) with thickness of 1 cm are used as the fast neutron filter, and the gamma filter, respectively. The L<sub>/</sub>D ratio of the designed neutron radiography facility is 90 and the diverging angle is 2.1degree. The thermal neutron flux, the ratio of thermal neutron to gamma dose rate, and the thermal neutron content at the beam exit plane are evaluated 1.47E+05 n<sub>/</sub>cm<sup>2</sup>.s, 2.96E+06 n<sub>/</sub>cm<sup>2</sup>.mR, and 92.5%, respectively. If such thermal neutron beam is built in Isfahan MNSR, many practical and scientific applications of the NR would be realized. ( با عرض پوزش به دلیل عدم امکان تایپ فرمول اصل چکیده را از روی پی دی اف مطالعه فرمایید)<br /> در این تحقیق، امکانسنجی استفاده از رآکتور MNSR اصفهان به عنوان چشمه نوترون حرارتی برای پرتونگاری نوترونی انجام شده است. برای تولید یک باریکه با شدت و کیفیت مناسب از آلومینیم با ضخامت 0.7 سانتیمتر به عنوان فیلتر نوترون سریع و از بیسموت و سرب به ضخامت 1 سانتیمتر به عنوان فیلتر گاما بهره برده شده است. نسبت L<sub>/</sub>D سامانه پرتونگاری نوترونی شبیهسازی شده 90 و زاویه واگرایی برابر 2.1 درجه میباشد. در این طراحی شار نوترون حرارتی در محل تصویربرداری .s<sup>2</sup>n<sub>/</sub>cm 05 E+47<sub>/</sub>1، شار نوترونهای حرارتی به دز گاما <br /> <sub>/</sub>mR<sup>2</sup> n<sub>/</sub>cm06E+96<sub>/</sub>2 و نسبت شار نوترونهای حرارتی به شار کل نوترونها 5<sub>/</sub>92% محاسبه شد. به کمک ساخت این سامانه پرتونگاری برای رآکتور MNSR میتوان به بسیاری از کاربردهای عملی و علمی یک سامانه پرتونگاری با نوترون دست یافت.https://jonsat.nstri.ir/article_234_4e34bd77c1240adad30f4d2340c5e195.pdf