نوع مقاله : مقاله پژوهشی

نویسندگان

مرکز تحقیقات وکاربرد لیزر ، سازمان انرژی اتمی ایران، صندوق پستی: 8486- 11365, ایران – تهران

چکیده

منابع تغذیه‌ای که به طور متداول در  لیزرهای پالسی با ساز وکار دمش الکتریکی بکار می‌روند در واقع نوعی دستگاه مولّد پالس هستند. این دستگاهها به علت  کاربردهای وسیعشان به ویژه در لیزرهای پالسی از اهمیت خاصی برخوردارند. در این کار پژوهشی، ویژگیهای یک دستگاه منبع تغذیه پالسی که در لیزرهای بخار فلزی از جمله لیزر بخار مس بکار برده می‌شود مورد بحث قرار گرفته است. طرّاحی مدار، ساخت و اندازه‌گیری پارامترهای بکار رفته نیز ارائه شده‌اند. بیشینه ولتاژ خروجی سیستم kV 10، پهنای پالس تقریباً μs1 و شدت جریان متوسّط mA 340 است. آهنگ تکرار پالس منبع تغذیه تا 29 کیلوهرتز قابل تغییر است.

کلیدواژه‌ها

عنوان مقاله [English]

Pulsed Power Supplies in CVL Lasers

نویسندگان [English]

  • D Salehinia
  • K Khorasani

چکیده [English]

Power supplies which are commonly used in pulsed lasers with the mechanism of electrical pumping are in fact a kind of pulse generator. These systems are of particular importance due to their wide variety of applications, and their use in pulsed lasers are the most important subject of interest. In this article specifications of a pulsed generator which is designed for metal vapor lasers such as CVL lasers will be introduced. Details of the designed circuit, construction, and measurements of the working parameters will be also presented. The maximum output voltage is 10 kV with the pulse width of ~1μsec. The average current is 340 mA and the pulse repetition rate is 29 kHz.          

کلیدواژه‌ها [English]

  • power supply
  • metal vapor laser
  • CVL laser
  1. 1.  W. T. Walter ,N. Soltimene, M. Piltch,  “Efficient pulsed gas discharge lasers,” IEEE Journal of  Quantum Electronics, Vol. QE-2, No.9, 474 (1966).

     

    2.    J. T. Verdeyen, Laser Electronics, 2 nd  edition, Printice – Hall International, Inc, 305-360 (1989).

     

    3. A. A. Vetter, “Quantitive effect of  initial current rise on pumping the double pulsed  copper chloride laser,” IEEE Jornal of Quantum  Electronics,  Vol. QE-13, No.11, 889 (1977).

     

     

     
       

     

     

    4. L. J. Kieffer, “A compilation of electron collision cross section data for modeling gas discharge laser,” JILA Infornation Center Report Sep,  No.13 (1973).

     

    1. K. G.Rischmuller, “Switching with MOSFET, s and IGBT,s, 50 Hz to 200 kHz,” Conf. Record 1990, PCIM Europe Conf.  (1990).   

                                                                                        

      6. P. A. Bokhan, V. A. Gerasimov, “Optimization of the excitation condition in a copper vapor laser,” Sov. J. Quantum Electron. Vol.8, No.3, 273 (1979).