[1] M. Maeda, R. Yokohama, Y. Yanagisawa, Recent developments in high-temperature superconducting magnet technology (review), IEEE Trans. Appl. Supercond. 24 (2014) 4602412.
[2] K. Sato, Research, Fabrication and Applications of Bi-2223 HTS Wires, World Scientific (2016).
[3] A. Devred, Quench origins, AIP Conference Proceedings 249 (1992) 1262-1308.
[4] M. Wilson, Superconducting Magnets, Oxford University Press (1983).
[5] Y. Iwasa, Stability and protection of superconducting magnets: A discussion, IEEE Trans. Appl. Supercond. 15(2) (2005) 1615-1620.
[6] M. Breschi, L. Trevisani, M. Boselli, L. Bottura, A. Devred, P.L. Ribani, F. Trillaud, Minimum quench energy and early quench development in NbTi superconducting strands, IEEE Trans. Appl. Supercond. 17(2) (2007) 2702-2705.
[7] W. Pi, X. Shi, J. Dong, Y. Wang, Experimental Investigation on Quench Characteristics of NbTi/Bi2223 Hybrid Superconductor, International conference on Mechatronics, Electronic, Industrial and Control Engineering, (2015).
[8] H. Bajas, M. Bajko, B. Bordini, L. Bottura, S. Izquierdo Bermudez, J. Feuvrier, A. Chiuchiolo, J. C. Perez, G. Willering, Quench Analysis of High-Current-Density Nb3Sn Conductors in Racetrack Coil Configuration, IEEE Trans. Appl. Supercond. 25(3) (2015) 1-5.
[9] C.L. Wu, Z.M. Bai, J.H. Li, J.X. Wang, Normal-zone propagation velocities in Bi-2223/Ag superconducting multifilament tape, Physica C: Superconductivity 386 (2003) 166-169.
[10] E. Martinez, F. Lera, M. Martinez-Lopez, Y. Yang, S.I. Schlachter, P. Lezza, P. Kovac, Quench development and propagation in metal/MgB2 conductors, Supercond. Sci. Technol. 19 (2006) 143.
[11] T. Huang, E. Martínez, C. Friend, Y. Yang, Quench characteristics of HTS conductors at low temperatures IEEE Trans. Appl. Supercond. 18(2) (2008) 1317-1320.
[12] Z. Zhong, H.S. Ruiz, L. Lai, Z. Huang, W. Wang, T. Coombs, Experimental study of the normal zone propagation velocity in double-layer 2G-HTS wires by thermal and electrical methods, IEEE Trans. Appl. Supercond. 25 (2015) 1-5.
[13] M. Lebioda, J. Rymaszewski, Analysis of normal zone propagation in superconducting tapes initiated by thermal disturbances, Journal of Physics: Conference Series. 709 (2016) 012011.
[14] T. Huang, A. Johnstone, Y. Yang, C. Beduz, and C. Friend, Finite element modelling of thermal stability and quench propagation in a pancake coil of PbBi2223 tapes, IEEE Trans. Appl. Supercond. 15(2) (2005) 1647–1650.
[15] B. Zhi-ming,
X. Wu,
C. Wu, J. Wang, Quench Propagation Properties Analysis of High-Temperature Superconductors using Finite Element Method,
Physica C: Superconductivity and its applications 436(2) (2006) 99-102.
[16] A. Stenvall, A. Korpela, J. Lehtonen, R. Mikkonen, Formulation for solving 1D minimum propagation zones in superconductors, Physica C: Superconductivity and its applications 468(13) (2008) 968-973.
[17] N. Glowa, R. Wesche, P. Bruzzone, P. Bruzzone, Quench Studies of YBCO Insulated and Noninsulated Pancake Coils, IEEE Trans. Appl. Supercond. 24(3) (2014) 1-5.
[18] S. Sanz, G. Sarmiento, A. Pujana, J.M. Merino, M. Tropeano, D. Nardelli, G. Grasso, J. Sun, F. Tora, I. Marino, Experimental Study and Simulation of Quench in MgB2 Coils for Wind Generators, IEEE Trans. Appl. Supercond. 26(3) (2016) 1-5.
[19] M.K. Al-Mosawi, S. Avgeros, C. Beduz, Y. Yang, A. Ballarino, Quench characteristics of Ag/AuBi2223 HTS-stainless steel stack used for the hybrid current leads of the Large Hadron Collider, J. Phys. Conf. Ser. 97(1) (2008) 012304.
[20] C.L. Wu, H.L. Yang, Finite element analysis of quench propagation velocity in Bi-2223/Ag superconducting multifilamentary tape, Materials Science Forum 546 (2007) 1931-1934.
[21] Y. Iwasa, Case Studies in Superconducting Magnets, 2th edition, Springer Science (2009).
[22] R. Bellis, Y. Iwasa, Quench Propagation in High Tc Superconductors, Cryogenics 34(2) (1994) 129-144.
[23] Cryocomp Eckels Engineering 3.06 Cryodata Inc. Florence SC, USA 29501.
[24] C. Uher, Thermal Conductivity of High-Tc Superconductors, J. Supercond. 3(4) (1990) 337-389.